EXHAUST PRE-SILENCER WITH DOWN PIPE, 89-92 NON TURBO MANUAL TRANSMISSION

Racing Beat Exhaust Pre-Silencer with Down Pipe, 89-92 Non Turbo Manual Transmission Coupe

Down Pipe with Presilencer – 1989-91 RX-7 Coupe Non-Turbo (equipped with Manual Transmission) – The 1986-92 13B 6-port engines, in stock form with the factory fuel injection, produces similar power gains with either our Header/Presilencer combo or our RX-7 Down Pipe/Presilencer combination. If you have no intentions of installing RB’s Holley intake System (or any other aftermarket carb set-up), we recommend the use of the RX-7 Down Pipe/Presilencer combo since it offers a slightly quieter exhaust note, is easier to install and less costly. If you are intending to upgrade the intake or fuel injection system, the Header/Presilencer combo offers the greatest performance potential.

The Down Pipe/Presilencer combination incorporates a 2.5-inch O.D. Down Pipe and our perforated stainless steel core and stainless steel wool-packed Presilencer to boost power approximately 13% – an 18 horsepower increase on a 1987 RX 7- and maintain a comfortable exhaust noise level during full power driving.

The replacement pipe connects to the factory exhaust manifold, and the presilencer connects to the factory Y-pipe, replacing all catalytic converters and intermediate tubing. It is not possible to use just the down pipe to replace only the catalytic converters. The use of the presilencer is required to complete the connection to the y-pipe. Although a short length of tubing can be substituted in place of the presilencer, we so not offer (or suggest) this due the unacceptable increase in exhaust noise.

The down pipe is equipped with a mounting flange for the oxygen sensor. This kit includes all necessary mounting hardware, air control & check valve cover plate, and gaskets (3 Replacement Pipe-to-Presilencer gaskets).

SKU: 16213

EXHAUST PRE-SILENCER WITH DOWN PIPE, 89-92 N/A MAN TRANS

 

$534.83


Related Products:

  • MUFFLER PAIR+"Y"PIPE, 86-92 ALL RACING BEAT

    MUFFLER PAIR+”Y”PIPE, 86-92 ALL RACING BEAT

    Racing Beat Muffler (Pair) +”Y” Pipe, 86-92 All

    1986-92 RX-7 Street Exhaust System
    The Racing Beat street legal, Power Pulse cat-back RX-7 exhaust system is the perfect replacement for your RX-7 exhaust – a durable assembly offering a real horsepower gain over your stock unit. If you need to retain the emissions status of your RX-7 and keep the sound level to a tolerable level – look no further than this Racing Beat system!

    The RX-7 exhaust system consists of a Racing Beat Y-pipe and two 2.375″-inch (OD) 304-stainless steel Power Pulse mufflers. The replacement Y-pipe is manufactured using 2.5-inch (OD) tubing, splitting off into a pair of 2-inch (OD) tubes feeding the left and right Power Pulse Muffler canisters.

    Careful consideration was given to the correct placement of each muffler canister with regards to the opening in the rear bumper. Racing Beat positioned the muffler canister “under” the rear bumper in order to present a more integrated look. Unlike many aftermarket systems that use a simple universal muffler, the Racing Beat system utilizes a rotary-engine designed muffler that has been specifically designed for the 1986-92 RX-7 application.

    Performance tests on a Dyno Jet chassis dyno have shown a 7.3 HP gain over the stock system (stock Turbo II). This bolt-on system uses the stock mounting points for ease of installation. Each system is supplied with all necessary mounting hardware and gaskets.

    SKU: 16418
    $939.89
    Add to cart
  • EXHAUST SYSTEM DUAL, 89-92 6 PORT RACING BEAT

    EXHAUST SYSTEM DUAL, 89-92 6 PORT RACING BEAT

    EXHAUST SYSTEM DUAL, 89-92 6 PORT RACING BEAT  Manual Transmission 

    Racing Beat offers the complete Full Stainless Steel Road Race RX-7 Exhaust System for the 1989-92 RX-7 (manual transmission). This completely Stainless Steel RX-7 exhaust system is intended for use on RX-7 applications running under the extremes of road racing, drag racing, or any high performance, high RPM application. The Racing Beat Full Stainless Steel RX-7 dual exhaust system has been designed to maximize the exhaust gas scavenging benefits while maintaining reasonable sound level outputs.

    NOTE: This exhaust system is not compatible for use on automatic transmission-equipped vehicles due to fitting tolerances with the larger AT bell housing.

    The following is included in this RX-7 exhaust system:

    1989-92 RX-7 Stainless Steel Road Race Header
    The Racing Beat Road/Race Header for the 1989-92 13B engine features Stainless Steel construction for excellent durability.

    Road Race Presilencer
    Mating to the outlet of the header is the Racing Beat Road Race Presilencer. The straight-through dual presilencer unit offers beneficial sound reducing qualities by trapping a significant level of the harsh rotary exhaust note.

    Road Race Y-Pipe
    The Racing Beat Y-Pipe section routes the exhaust gases exiting the presilencer section to each of the Power Pulse muffler units.

    Road Race Mufflers (Left and Right Pair)
    Sharing the same design technology as our Power Pulse muffler units, the Road/Race mufflers (Left and Right) feature all stainless steel construction for superior durability and appearance. Large diameter tubing routes the exhaust gas through each muffler unit, exiting through polished stainless steel tips.

    SKU: 16452
    $1,600.00
    Add to cart
  • Exhaust Down Pipe 86-92 Non-Turbo Coupes 2 1/2"

    Exhaust Down Pipe 86-92 Non-Turbo Coupes 2 1/2″

    Exhaust Down Pipe 86-92 Non-Turbo Coupes 2 1/2″

    This Down Pipe is available for custom applications in a 1986-91 RX-7 (excluding convertible) non-turbo application. This 2.5-inch down pipe fits either manual or automatic transmission equipped cars and eliminates the catalytic converter sections.

    This down pipe bolts to the stock exhaust manifold, but the use of our presilencer (or a suitable replacement) is required to connect this assembly to the Y-pipe section. If you need to retain a catalytic converter in your exhaust system, you may find a suitable unit offered in the aftermarket. Although the replacement of your stock catalytic converters with a single aftermarket unit is technically NOT legal, this approach may suit your emissions needs. We suggest you contact your local emissions testing facility for more information. Gaskets sold separately.

    SKU: S16206
    $212.52
    Add to cart