TIP: you can select a year on the left to further refine these results

Services

Virtually ALL the SERVICES listed here assume you are either buying NEW parts from us to have the service done on them, or you are sending YOUR parts to us for the service. PLEASE be aware the cost listed is for THE SERVICE ONLY! The price does NOT include any shipping of parts to us or return shipping to you. Return shipping will be added to your invoice and we will contact you for payment. Please be aware we must insure all return shipments for 100% of the REPLACEMENT COST of ALL parts AND service work performed, using the price of NEW parts. We STRONGLY recommend you do the same for ALL parts shipped to us. We have received MANY parts that were packaged poorly and damaged in shipment. It will be YOUR responsibility to file any / all claims with the carrier. UPS / Postal / FEDEX STORES pretty much will do a TERRIBLE job of packing so we encourage you to do it yourself.


Filter Products Showing 1 - 20 of 29 results
Select Your Year
Categories
  • SERVICE BALANCE ENGINE, 2-ROTOR ENGINE

    SERVICE BALANCE ENGINE, 2-ROTOR ENGINE

    Service Balance Engine, 2-Rotor Engine

    SKU: SV-BALANCE
    $480.00
    Add to cart
  • SERVICE BALANCE ENGINE, 3-ROTOR

    Service Balance Engine, 3-Rotor 

    SKU: SV-BALANCE-3
    $720.00
    Add to cart
  • SERVICE BALANCE ENGINE, 4-ROTOR

    SERVICE BALANCE ENGINE, 4-ROTOR

    SERVICE BALANCE ENGINE, 4-ROTOR

    SKU: SV-BALANCE-4
    $960.00
    Add to cart
  • SERVICE CUT 2MM APEX SEAL GROOVE RX8

    Cut RX8 rotor apex seal grooves to RX7 2mm FULL DEPTH grooves.

    Price is to do a PAIR of rotors. Price DOES NOT INCLUDE the rotors.

    Turn around is approximately 3 weeks from when rotors are received AT Mazdatrix. Time does NOT include shipping back to you.

     

    SKU: SV-CUT-2MM-RX8
    $550.00
    Add to cart
  • SERVICE CUT 3MM APEX SEAL GROOVE RX7 or RX8

    SERVICE CUT 3MM APEX SEAL GROOVE in 2MM RX7 or RX8 Rotors

    Price is to do a PAIR of rotors. Price DOES NOT INCLUDE the rotors.

    Either buy them new from us or ship your pair to us.

    Turn around is approximately 3 weeks from when rotors are received AT Mazdatrix. Time does NOT include shipping back to you.

    SKU: SV-CUT-3MM-RX7
    $530.00
    Add to cart
  • SERVICE PRESS ONE BEARING WITH SCREW

    SERVICE PRESS ONE BEARING WITH SCREW

    SERVICE PRESS ONE BEARING WITH SCREW

    Labor only for 93-11 Main bearings which all use a retaining screw.

    Does not include a new/replacement screw.

    SKU: SV-BRG-PRESS8S6
    $40.00
    Add to cart
  • SERVICE ROTOR LIGHTENING (PAIR)

    SERVICE ROTOR LIGHTENING (PAIR)

    Service Rotor Lightening (Pair)
    Removes approx. 4/10 pound (180 grams) from each rotor
    Rotors must be cleaned before shipping to Mazdatrix.  Customer is responsible for shipping.

    Assembly must be re-balanced after lightening.

    SKU: SV-ROTOR-LIGHTENING
    Manufacturer SKU: SV-ROTOR-LIGHTENING
    $480.00
    Add to cart
  • SERVICE, PRESS ONE BEARING WITHOUT SCREW

    SERVICE, PRESS ONE BEARING WITHOUT SCREW

    Press One Bearing without Screw. Includes all types of rotor bearings and all main bearings before ’93.

    (“Screw” bearings are the 93-11 Main bearings with a set screw)

    SKU: SV-BRG-PRESSXS6
    $30.00
    Add to cart
  • Side Cut Two Rotors

    Side Cut Two Rotors

    Side cut two rotors for high RPM or high boost engines.

    When a Rotary engine is spun to high RPM’s — say 8500+, or has a lot of boost, the rotors tend to “wobble” (for lack of a better term) and first the corner seal area hits the side housings- then more of the rotor and rotor gear will hit the side housings. Needless to say this is bad — trashes the rotors and damages the side housings.
    For “race” motors we machine off anywhere from .005″ to .008″ per side to gain the extra clearance needed. Please tell us the RPM and / or boost you are going to be using.
    Price does not include the rotors or return shipping to you.
    We can do this to either new (which we prefer) or CLEANED used rotors — you have to clean them please.

    SKU: SV-ROTOR-SIDE
    $170.00
    Add to cart
  • WATER SEAL GROOVES CUT (1 SIDE)

    Cut waterseal grooves. 86-95

    Turn around is approximately 3 weeks from when housings are received AT Mazdatrix. Time does NOT include shipping back to you.

    SKU: SV-WATERSEAL
    Manufacturer SKU: SV-WATERSEAL
    $330.00
    Add to cart
  • WPC TREATMENT

    WPC TREATMENT CENTER HOUSING

    WPC Treatment Center Housing
    Treatment only. Part not included.

    SKU: WPC-HSNG-CENTER
    $120.00
    Add to cart
  • WPC TREATMENT

    WPC TREATMENT E-SHAFT, FRICTION & DURABILITY

    WPC Treatment Eccentric Shaft, Friction & Durability
    Treatment only. Part not included.

    SKU: WPC-ESHAFT-DURA
    $210.00
    Add to cart
  • WPC TREATMENT

    WPC TREATMENT E-SHAFT, FRICTION ONLY

    WPC Treatment Eccentric Shaft, Friction Only
    Treatment Only.  Part not included.

    SKU: WPC-ESHAFT-FRIC
    $140.00
    Add to cart
  • WPC TREATMENT

    WPC TREATMENT FRONT OR REAR SIDE HOUSING

    WPC Treatment One Front or Rear Side Housing

    SKU: WPC-SIDE-HOUSIN
    $80.00
    Add to cart
  • WPC TREATMENT

    WPC TREATMENT FRONT STATIONARY GEAR

    WPC Treatment Front Stationary Gear
    Treatment Only. Part not included.

    SKU: WPC-GEAR-FRONT
    $34.00
    Add to cart
  • WPC TREATMENT

    WPC TREATMENT OIL PUMP GEARS

    WPC Treatment Oil Pump Gears
    Treatment Only.  Part not included.

    SKU: WPC-OIL-PUMP
    $32.00
    Add to cart
  • WPC TREATMENT

    WPC TREATMENT ONE APEX SEAL

    WPC Treatment, One Apex Seal
    Treatment only. Part not included.

    Mazdatrix is pleased to announce our newest service available, WPC Treatment. While used on our race motors in the 2007 season with great success, we have decided to spread the success on to you! WPC is a proven treatment process that has been used for many years in Japan whereby ultra fine particles of various media are fired at high velocity towards the surface of a product. The thermal discharge that takes place upon impact permanently changes the surface of the metal by compaction and creates a harder, more durable final product.
                            
    SKU: WPC-APEX-SEAL
    $15.00
    Add to cart
  • WPC TREATMENT

    WPC TREATMENT ONE CORNER SEAL

    WPC Treatment, 1 Corner Seal
    Treatment only. Part not included.

    SKU: WPC-CORNER-SEAL
    $4.00
    Add to cart
  • WPC TREATMENT

    WPC TREATMENT ONE CORNER SPRING

    WPC Treatment, One Corner Seal Spring
    Treatment only. Part not included.

    SKU: WPC-COR-SPRING
    $3.00
    Add to cart
  • WPC TREATMENT

    WPC TREATMENT ONE MAIN BEARING

    WPC Treatment One Main Bearing
    Treatment Only.  Part not included.

    SKU: WPC-MAIN-BEARIN
    $10.00
    Add to cart
Shopping Cart
0