MUFFLER PAIR+”Y”PIPE, 86-92 ALL RACING BEAT

Racing Beat Muffler (Pair) +”Y” Pipe, 86-92 All

1986-92 RX-7 Street Exhaust System
The Racing Beat street legal, Power Pulse cat-back RX-7 exhaust system is the perfect replacement for your RX-7 exhaust – a durable assembly offering a real horsepower gain over your stock unit. If you need to retain the emissions status of your RX-7 and keep the sound level to a tolerable level – look no further than this Racing Beat system!

The RX-7 exhaust system consists of a Racing Beat Y-pipe and two 2.375″-inch (OD) 304-stainless steel Power Pulse mufflers. The replacement Y-pipe is manufactured using 2.5-inch (OD) tubing, splitting off into a pair of 2-inch (OD) tubes feeding the left and right Power Pulse Muffler canisters.

Careful consideration was given to the correct placement of each muffler canister with regards to the opening in the rear bumper. Racing Beat positioned the muffler canister “under” the rear bumper in order to present a more integrated look. Unlike many aftermarket systems that use a simple universal muffler, the Racing Beat system utilizes a rotary-engine designed muffler that has been specifically designed for the 1986-92 RX-7 application.

Performance tests on a Dyno Jet chassis dyno have shown a 7.3 HP gain over the stock system (stock Turbo II). This bolt-on system uses the stock mounting points for ease of installation. Each system is supplied with all necessary mounting hardware and gaskets.

SKU: 16418

MUFFLER PAIR+”Y”PIPE, 86-92 ALL RACING BEAT

 

$939.89

Reviews

There are no reviews yet.

Be the first to review “MUFFLER PAIR+”Y”PIPE, 86-92 ALL RACING BEAT”

Your email address will not be published. Required fields are marked *


Related Products:

  • EXHAUST SYSTEM DUAL, 89-92 6 PORT RACING BEAT

    EXHAUST SYSTEM DUAL, 89-92 6 PORT RACING BEAT

    EXHAUST SYSTEM DUAL, 89-92 6 PORT RACING BEAT  Manual Transmission 

    Racing Beat offers the complete Full Stainless Steel Road Race RX-7 Exhaust System for the 1989-92 RX-7 (manual transmission). This completely Stainless Steel RX-7 exhaust system is intended for use on RX-7 applications running under the extremes of road racing, drag racing, or any high performance, high RPM application. The Racing Beat Full Stainless Steel RX-7 dual exhaust system has been designed to maximize the exhaust gas scavenging benefits while maintaining reasonable sound level outputs.

    NOTE: This exhaust system is not compatible for use on automatic transmission-equipped vehicles due to fitting tolerances with the larger AT bell housing.

    The following is included in this RX-7 exhaust system:

    1989-92 RX-7 Stainless Steel Road Race Header
    The Racing Beat Road/Race Header for the 1989-92 13B engine features Stainless Steel construction for excellent durability.

    Road Race Presilencer
    Mating to the outlet of the header is the Racing Beat Road Race Presilencer. The straight-through dual presilencer unit offers beneficial sound reducing qualities by trapping a significant level of the harsh rotary exhaust note.

    Road Race Y-Pipe
    The Racing Beat Y-Pipe section routes the exhaust gases exiting the presilencer section to each of the Power Pulse muffler units.

    Road Race Mufflers (Left and Right Pair)
    Sharing the same design technology as our Power Pulse muffler units, the Road/Race mufflers (Left and Right) feature all stainless steel construction for superior durability and appearance. Large diameter tubing routes the exhaust gas through each muffler unit, exiting through polished stainless steel tips.

    SKU: 16452
    $1,600.00
    Add to cart
  • MUFFLER POWER PULSE, 86-92 RIGHT RACING BEAT

    MUFFLER POWER PULSE, 86-92 RIGHT RACING BEAT

    Racing Beat Power Pulse Muffler, 86-92 Right Side

    *** Racing Beat only sells this muffler as a pair with the Left side #16446. You must order both ***

    These Power Pulse Mufflers for the RX-7 have been installed on 1000’s of RX-7’s over the years, and their popularity continues strong today! Each RX-7 muffler canister is manufactured using 304- stainless steel and features a 2.375″ OD inlet tube diameter and a straight-through design for maximum performance gains. Finished with a 3″ OD polished 304 stainless steel tip, these mufflers sound as good as they look! This bolt-on muffler is easily installed and comes complete with a mounting gasket, and can be ordered separately or with the Left Muffler. This muffler will bolt directly to the stock Y-pipe or the Racing Beat Y-pipe.

    This beautiful muffler is constructed with a 304 stainless steel shell, polished to a mirror-like finish; a completely stainless steel internal assembly; and layers of durable stainless steel and ceramic wools. The choice of 304 stainless steel offers reduced weight and increases corrosion resistance in harsh operating environments. To sum it up, we can comfortably state that this muffler canister is one of the best looking RX-7 canisters we have seen on today’s market, with the performance to back up the looks!

    Replacement Rubber Exhaust Hangers
    We recommend the replacement of the original RX-7 rubber exhaust hangers during the installation of any new exhaust component. It is our experience that over time the original rubber hangers can deteriorate, crack, and fail; which can result in the incorrect alignment of the exhaust system.

    SKU: 16445
    $345.64
    Add to cart
  • EXHAUST "Y" PIPE-RACING BEAT, 86-92

    EXHAUST “Y” PIPE-RACING BEAT, 86-92

    Racing Beat Exhaust “Y” Pipe, 86-92 

    The Racing Beat Y-pipe for the 1986-92 RX-7 (All Models) is a perfect replacement for a failing stock component. The Racing Beat Y-pipe is slightly larger in diameter than the stock non-turbo Y-pipe, and matches the diameter (2.5″ OD) of the stock TURBO II Y-pipe. Therefore, if you are replacing the muffler(s) on a TURBO II application, and unless the original stock Y-pipe is failing, there is no performance benefit to be gained from the addition of this Y-pipe. This Y-pipe includes the Cat-to-Y-pipe gasket. If needed, the Y-pipe outlet gaskets can be purchased separately. Manufactured by Racing Beat using heavy-walled steel tubing and laser cut flanges then finished with a chrome-plated surface coating for excellent durability.

    Replacement Rubber Exhaust Hangers
    We recommend the replacement of the original rubber exhaust hangers during the installation of any new exhaust component. It is our experience that over time the original rubber hangers can deteriorate, crack, and fail; which can result in the incorrect alignment of the exhaust system.

    SKU: 16447
    $340.73
    Add to cart
  • MUFFLER POWER PULSE, 86-92 LEFT RACING BEAT

    MUFFLER POWER PULSE, 86-92 LEFT RACING BEAT

    Racing Beat Power Pulse Muffler, 86-92 Left Side

    *** Racing Beat only sells this muffler with the Right side #16445. You must order both  ***

    These Power Pulse Mufflers for the RX-7 have been installed on 1000’s of RX-7’s over the years, and their popularity continues strong today! Each muffler canister is manufactured using 304- stainless steel and features a 2.375″ OD inlet tube diameter and a straight-through design for maximum performance gains. Finished with a 3″ OD polished 304 stainless steel tip, these mufflers sound as good as they look! This bolt-on muffler is easily installed and comes complete with a mounting gasket, and can be ordered separately or with the Right Muffler. This muffler will bolt directly to the stock Y-pipe or the Racing Beat Y-pipe.

    This beautiful muffler is constructed with a 304 stainless steel shell, polished to a mirror-like finish; a completely stainless steel internal assembly; and layers of durable stainless steel and ceramic wools. The choice of 304 stainless steel offers reduced weight and increases corrosion resistance in harsh operating environments. To sum it up, we can comfortably state that this muffler canister is one of the best looking RX-7 canisters we have seen on today’s market, with the performance to back up the looks!

    Replacement Rubber RX-7 Exhaust Hangers
    We recommend the replacement of the original rubber RX-7 exhaust hangers during the installation of any new exhaust component. It is our experience that over time the original rubber hangers can deteriorate, crack, and fail; which can result in the incorrect alignment of the exhaust system.

    SKU: 16446
    $345.64
    Add to cart