1991
Exhaust
-
-
ENGINE TO PIPE FLANGE, 13B
Engine to Pipe Flange, 13B 79-95 all turbo and non-turbo
This 1/2″ thick laser-cut engine-to-header exhaust flange can be used to fabricate a custom exhaust system for any 13B rotary engine. This is the same exhaust flange that is used on Racing Beat’s 13B engine headers.
SKU: 16183 -
EXHAUST “Y” PIPE RACING BEAT, 86-92 DUAL PIPE SYSTEM
Racing Beat Exhaust “Y” Pipe, 86-92 Dual Pipe System
SKU: 16411 -
EXHAUST “Y” PIPE-RACING BEAT, 86-92
Racing Beat Exhaust “Y” Pipe, 86-92
The Racing Beat Y-pipe for the 1986-92 RX-7 (All Models) is a perfect replacement for a failing stock component. The Racing Beat Y-pipe is slightly larger in diameter than the stock non-turbo Y-pipe, and matches the diameter (2.5″ OD) of the stock TURBO II Y-pipe. Therefore, if you are replacing the muffler(s) on a TURBO II application, and unless the original stock Y-pipe is failing, there is no performance benefit to be gained from the addition of this Y-pipe. This Y-pipe includes the Cat-to-Y-pipe gasket. If needed, the Y-pipe outlet gaskets can be purchased separately. Manufactured by Racing Beat using heavy-walled steel tubing and laser cut flanges then finished with a chrome-plated surface coating for excellent durability.
Replacement Rubber Exhaust Hangers
We recommend the replacement of the original rubber exhaust hangers during the installation of any new exhaust component. It is our experience that over time the original rubber hangers can deteriorate, crack, and fail; which can result in the incorrect alignment of the exhaust system.SKU: 16447 -
-
EXHAUST CONNECTING PIPES, RACING BEAT DUAL Y TO MUFFLER
Racing Beat Exhaust Connecting Pipes, Dual Y To Muffler
Racing Beat’s Road Race Extension Tubes are intended to bolt-up to the outlets of the Road Race Y-Pipe section. You WILL need these Extension Tubes if: You will be 1) retaining the stock mufflers, or 2) already have the Racing Beat Power Pulse Mufflers for the 1986-92 RX-7 (non-turbo and turbo muffler versions). It is possible that these extension tubes may be compatible with other aftermarket mufflers, but we cannot confirm fitment or outlet tip positioning with these units. You DO NOT need these Extension Tubes if: You will be replacing the stock mufflers, or any aftermarket muffler, with the Racing Beat Road Race Muffler units
SKU: 16412 -
EXHAUST CONVERTER GASKET, 86-92 ALL FRONT & REAR
EXHAUST CONVERTER GASKET, 86-92 ALL FRONT & REAR
86-92 Rx7 All Converters (Front & Rear)
SKU: 40-3050-N378 Manufacturer SKU: N378-40-305 -
Exhaust Down Pipe 86-92 Non-Turbo Coupes 2 1/2″
Exhaust Down Pipe 86-92 Non-Turbo Coupes 2 1/2″
This Down Pipe is available for custom applications in a 1986-91 RX-7 (excluding convertible) non-turbo application. This 2.5-inch down pipe fits either manual or automatic transmission equipped cars and eliminates the catalytic converter sections.
This down pipe bolts to the stock exhaust manifold, but the use of our presilencer (or a suitable replacement) is required to connect this assembly to the Y-pipe section. If you need to retain a catalytic converter in your exhaust system, you may find a suitable unit offered in the aftermarket. Although the replacement of your stock catalytic converters with a single aftermarket unit is technically NOT legal, this approach may suit your emissions needs. We suggest you contact your local emissions testing facility for more information. Gaskets sold separately.
SKU: S16206 -
Exhaust Down Pipe 86-92 RX7 Convertibles 2 1/2″
Racing Beat Down Pipe for 86-92 RX7 Convertibles 2 1/2″
This Down Pipe is available for use in a 1988-92 RX-7 Convertible application. This 2.5″ OD Down Pipe bolts directly to the stock exhaust manifold and eliminates all catalytic converters, but the use of our presilencer (or a suitable replacement) is required to connect this assembly to the Y-pipe section. If you need to retain a catalytic converter in your exhaust system, you may find a suitable unit offered in the aftermarket. Although the replacement of your stock catalytic converters with a single aftermarket unit is technically NOT legal, this approach may suit your emissions needs. We suggest you contact your local emissions testing facility for more information. Gaskets sold separately.
SKU: S16209 -
Exhaust Down Pipe for 87-92 TURBO 2 1/2″
This Down Pipe is available for custom applications in a 1987-91 RX-7 Turbo II application.
This 2.5-inch down pipe fits either manual or automatic transmission equipped cars and eliminates the catalytic converter sections.
This down pipe bolts to the stock turbo, but the use of our presilencer (or a suitable replacement) is required to connect this assembly to the Y-pipe section. If you need to retain a catalytic converter in your exhaust system, you may find a suitable unit offered in the aftermarket. Although the replacement of your stock catalytic converters with a single aftermarket unit is technically NOT legal, this approach may suit your emissions needs. We suggest you contact your local emissions testing facility for more information. Gaskets sold separately.
.
SKU: S16207 -
-
EXHAUST HANGER, 2 SLEEVES
Exhaust Hanger, 2 Sleeves
Go To Our FAQ for Exhaust Hangers to see the locations and part numbers of the hangers for your car.
SKU: 40-1600-1114 Manufacturer SKU: 1114-40-160 -
EXHAUST HANGER, 86-92 @ “Y” PIPE
Exhaust Hanger at “Y” Pipe, 86-92
Go To Our FAQ for Exhaust Hangers to see the locations and part numbers of the hangers for your car.
SKU: 40-060B-N326 Manufacturer SKU: N326-40-060B -
EXHAUST HANGER, 86-92 BAND+ SLEEVE
Exhaust Hanger with Steel Band around it and a sleeve, 86-92
Go To Our FAQ for Exhaust Hangers to see the locations and part numbers of the hangers for your car.
SKU: 40-060B-N328 Manufacturer SKU: N328-40-060B -
-
EXHAUST HEADER 13B, 79-92 4&6-PORT DUAL OUTLET
Racing Beat 13B Exhaust Header, 79-92 4&6-PORT DUAL OUTLET
SKU: 16127 Manufacturer SKU: 16127 -
EXHAUST HEADER 13B, 86-92 RX7 NON-TURBO
Racing Beat 13B 6 Port Exhaust Header, 86-92 RX7 Non-Turbo
Racing Beat’s rotary exhaust Header/Collector is designed for a bolt-on installation, when used with the appropriate Power Pulse Presilencer, in all 1986-92 non-turbo RX-7s. The combination of this Header/Collector and the appropriate presilencer replaces the stock exhaust manifold and all catalytic converters, along with any intermediate pieces of tubing. (In this application, the presilencer will bolt-up to the factory Y-pipe.)
The Header/Collector assembly is constructed with .120″ wall, mandrel-bent, mild steel tubing (2″ OD primary, 2.5″ OD secondary) for excellent durability and noise suppression. Both flanges are laser cut from 7/16″ thick steel plate for positive gas sealing. An outlet gasket is included. An engine-to-header gasket is available separately if needed. This header is equipped with an oxygen sensor fitting.
SKU: 16130 -
EXHAUST HEADER 13B, 89-92 6PORT DUAL PIPE
Racing Beat 13B Exhaust Header, 89-92 With 6 Port Actuation and O2 sensor fitting.
SKU: 16129 -
-
EXHAUST HEADER GASKET, OUTLET DUAL PIPE
EXHAUST HEADER GASKET, OUTLET DUAL PIPE
Gasket for 16197 Flange, Dual Outlet Pipe
SKU: 16300