EXHAUST NUT, 12MM CATALYTIC CONVERTER 17MM HEX
12mm x 1.25 (fine thread) Nut for catalytic converter studs
EXHAUST NUT, 12MM CATALYTIC CONVERTER 17MM HEX
| SKU: | 40-3550-8118 |
| Manufacturer SKU: | 8118-40-355 |
EXHAUST NUT, 12MM CATALYTIC CONVERTER 17MM HEX
$12.07
Related Products:
-
EXHAUST HEADER 13B, 86-92 RX7 NON-TURBO
Racing Beat 13B 6 Port Exhaust Header, 86-92 RX7 Non-Turbo
Racing Beat’s rotary exhaust Header/Collector is designed for a bolt-on installation, when used with the appropriate Power Pulse Presilencer, in all 1986-92 non-turbo RX-7s. The combination of this Header/Collector and the appropriate presilencer replaces the stock exhaust manifold and all catalytic converters, along with any intermediate pieces of tubing. (In this application, the presilencer will bolt-up to the factory Y-pipe.)
The Header/Collector assembly is constructed with .120″ wall, mandrel-bent, mild steel tubing (2″ OD primary, 2.5″ OD secondary) for excellent durability and noise suppression. Both flanges are laser cut from 7/16″ thick steel plate for positive gas sealing. An outlet gasket is included. An engine-to-header gasket is available separately if needed. This header is equipped with an oxygen sensor fitting.
SKU: 16130 -
EXHAUST HEADER 13B, 79-92 4&6-PORT DUAL OUTLET
Racing Beat 13B Exhaust Header, 79-92 4&6-PORT DUAL OUTLET
SKU: 16127 Manufacturer SKU: 16127 -
EXHAUST HEADER 12A, 79-85 RX7 DUAL OUTLET
Racing Beat 12A Exhaust Header, 79-85 RX7 Dual Outlet
SKU: 16125 -
EXHAUST HEADER 12A, 84-85 RX7 (MANUAL TRANSMISSION)
Racing Beat 12A Exhaust Header, 84-85 RX7 with Manual Transmission
Actual header not shown in photo – oxygen sensor fitting only included on 1984-85 RX-7 GSL-SE header.
The Racing Beat RX-7 Header is designed for a bolt-on installation, when used with the appropriate Power Pulse Presilencer in all 1984-85 RX-7s (12A – Manual Transmission). The combination of this RX-7 exhaust header and the appropriate presilencer replaces the stock exhaust manifold and all catalytic converters for use in racing applications, along with any intermediate pieces of tubing.
This RX-7 header assembly is constructed with .120-inch wall, mandrel-bend, mild steel tubing for increased durability. The engine-to-header flange is laser-cut from .5-inch thick steel plate to ensure positive gas sealing. An outlet gasket is included. An engine-to-header gasket is available separately if needed.
SKU: 16012 -
EXHAUST HEADER 12A, 84-85 RX7 AUTOMATIC TRANSMISSION
Racing Beat 12A Exhaust Header, 84-85 RX7 Automatic Transmission
This Streetable Header/Collector is designed for a bolt-on installation, when used with the appropriate Power Pulse Presilencer in all 1984-85 RX-7 (12A – Automatic Transmission) models. The combination of this Header/Collector and the appropriate presilencer replaces the stock exhaust manifold and all catalytic converters, along with any intermediate pieces of tubing.
The Header/Collector assembly is constructed with .120-inch wall, mandrel-bend, mild steel tubing for increased durability. Both flanges are flame-cut from .4375-inch thick steel plate for positive gas sealing. An outlet gasket is included. An engine-to-header gasket is available separately if needed.
SKU: 16014 -
EXHAUST NUT, 10X1.50 EXHAUST MANIFOLD
Exhaust Nut, 10X1.50 All 74-92 rotor housing stud
SKU: 40-3550-8134 Manufacturer SKU: 8134-40-355
You May Also Like:
-
-
EXHAUST HEADER 13B, 74-78 NO FLANGE EXCEPT PICK UP
Racing Beat 13B Exhaust Header, 74-78 No Flange. Will not work on the Pick Up
This rotary exhaust Header/Collector (less outlet flange) is ideal for RX-2, RX-3, RX-4, and COSMO (does not fit rotary pickup) custom exhaust installations. The flame-cut, .5-inch thick engine flange provides positive sealing and alignment. By integrating the collector with the header we reduce the effort and cost in completing the exhaust system. Engine-to-pipe gaskets are not included but are available separately. An Air Control and Check Valve Cover Plate is required when using this header with a stock intake system.
If the stock resonator is eliminated during installation of this unit, we strongly recommend selecting a Power Pulse Presilencer and installing it in place of the resonator to maintain a pleasant noise level and character.
SKU: 16007 -
-
-
Exhaust Down Pipe for 86-92 RX7 Non-Turbo Coupe 2 1/2″
Exhaust Down Pipe 86-92 Non-Turbo Coupes 2 1/2″
This Down Pipe is available for custom applications in a 1986-91 RX-7 (excluding convertible) non-turbo application. This 2.5-inch down pipe fits either manual or automatic transmission equipped cars and eliminates the catalytic converter sections.
This down pipe bolts to the stock exhaust manifold, but the use of our presilencer (or a suitable replacement) is required to connect this assembly to the Y-pipe section. If you need to retain a catalytic converter in your exhaust system, you may find a suitable unit offered in the aftermarket. Although the replacement of your stock catalytic converters with a single aftermarket unit is technically NOT legal, this approach may suit your emissions needs. We suggest you contact your local emissions testing facility for more information. Gaskets sold separately.
SKU: S16206 -
EXHAUST SYSTEM DUAL, 13B DUAL PIPE 79-85 RX7
Racing Beat 13B 4 Port Dual Pipe Exhaust System 79-85
Will work on 6 Port if not using the actuators.SKU: 16423