EXHAUST NUT, 10X1.50 EXHAUST MANIFOLD
Exhaust Nut, 10X1.50 All 74-92 rotor housing stud
SKU: | 40-3550-8134 |
Manufacturer SKU: | 8134-40-355 |
EXHAUST NUT, 10X1.50 EXHAUST MANIFOLD
$6.40
Related Products:
-
EXHAUST HEADER 12A, 79-85 RX7 DUAL OUTLET
Racing Beat 12A Exhaust Header, 79-85 RX7 Dual Outlet
SKU: 16125 -
EXHAUST WASHER, MANIFOLD TO ENGINE
Exhuast Washer, Manifold to Engine
SKU: 20-5230-E508 Manufacturer SKU: E508-20-523 -
EXHAUST HEADER 13B, 84-85 RX7 GSLSE 6 PORT, 81-85 4 PORT CONVERSION
Racing Beat 13B Exhaust Header, 84-85 RX7 GSLSE 6-port, 81-85 4 PORT CONVERSION
This RX-7 Header is designed for a bolt-on installation, when used with the appropriate Power Pulse Presilencer in all 1981-85 RX-7 with 13B conversion or the 1984-85 RX-7 GSL-SE models. The combination of this RX-7 header and the appropriate presilencer replaces the stock exhaust manifold and all catalytic converters for use in racing applications, along with any intermediate pieces of tubing. This header includes a mounting flange for the oxygen sensor.
The Racing Beat RX-7 header assembly is constructed with .120-inch wall, mandrel-bend, mild steel tubing for increased durability and sound suppression. Both flanges are laser-cut from .5-inch thick steel plate for positive gas sealing. An outlet gasket is included. An engine-to-header gasket is available separately if needed.
SKU: 16013 -
-
EXHAUST NUT, 12MM CATALYTIC CONVERTER 17MM HEX
12mm x 1.25 (fine thread) Nut for catalytic converter studs
EXHAUST NUT, 12MM CATALYTIC CONVERTER 17MM HEX
SKU: 40-3550-8118 Manufacturer SKU: 8118-40-355 -
EXHAUST HEADER 13B, 86-92 RX7 NON-TURBO
Racing Beat 13B 6 Port Exhaust Header, 86-92 RX7 Non-Turbo
Racing Beat’s rotary exhaust Header/Collector is designed for a bolt-on installation, when used with the appropriate Power Pulse Presilencer, in all 1986-92 non-turbo RX-7s. The combination of this Header/Collector and the appropriate presilencer replaces the stock exhaust manifold and all catalytic converters, along with any intermediate pieces of tubing. (In this application, the presilencer will bolt-up to the factory Y-pipe.)
The Header/Collector assembly is constructed with .120″ wall, mandrel-bent, mild steel tubing (2″ OD primary, 2.5″ OD secondary) for excellent durability and noise suppression. Both flanges are laser cut from 7/16″ thick steel plate for positive gas sealing. An outlet gasket is included. An engine-to-header gasket is available separately if needed. This header is equipped with an oxygen sensor fitting.
SKU: 16130