EXHAUST TIP, 86-92 NON TURBO —NLA—

Related Products:

• 

  MUFFLER PAIR+”Y”PIPE, 86-92 ALL RACING BEAT

  Racing Beat Muffler (Pair) +”Y” Pipe, 86-92 All

  1986-92 RX-7 Street Exhaust System
  The Racing Beat street legal, Power Pulse cat-back RX-7 exhaust system is the perfect replacement for your RX-7 exhaust – a durable assembly offering a real horsepower gain over your stock unit. If you need to retain the emissions status of your RX-7 and keep the sound level to a tolerable level – look no further than this Racing Beat system!

  The RX-7 exhaust system consists of a Racing Beat Y-pipe and two 2.375″-inch (OD) 304-stainless steel Power Pulse mufflers. The replacement Y-pipe is manufactured using 2.5-inch (OD) tubing, splitting off into a pair of 2-inch (OD) tubes feeding the left and right Power Pulse Muffler canisters.

  Careful consideration was given to the correct placement of each muffler canister with regards to the opening in the rear bumper. Racing Beat positioned the muffler canister “under” the rear bumper in order to present a more integrated look. Unlike many aftermarket systems that use a simple universal muffler, the Racing Beat system utilizes a rotary-engine designed muffler that has been specifically designed for the 1986-92 RX-7 application.

  Performance tests on a Dyno Jet chassis dyno have shown a 7.3 HP gain over the stock system (stock Turbo II). This bolt-on system uses the stock mounting points for ease of installation. Each system is supplied with all necessary mounting hardware and gaskets.

  SKU:

  16418

  $939.89
  Add to cart
• 

  EXHAUST HANGER, 86-92 @ “Y” PIPE

  

  Exhaust Hanger at “Y” Pipe, 86-92

  Go To Our FAQ for Exhaust Hangers to see the locations and part numbers of the hangers for your car.

  SKU:	40-060B-N326
  Manufacturer SKU:	N326-40-060B

  $33.25
  Add to cart
• 

  EXHAUST HANGER, DONUT

  

  Exhaust Hanger Donut

   

  SKU:	40-0610-1114
  Manufacturer SKU:	1114-40-061

  $15.35
  Add to cart
• 

  EXHAUST HANGER, 86-92 BAND+ SLEEVE

  

  Exhaust Hanger with Steel Band around it and a sleeve, 86-92

  Go To Our FAQ for Exhaust Hangers to see the locations and part numbers of the hangers for your car.

  SKU:	40-060B-N328
  Manufacturer SKU:	N328-40-060B

  $32.66
  Add to cart
• 

  EXHAUST HEADER 13B, 86-92 RX7 NON-TURBO

  Racing Beat 13B 6 Port Exhaust Header, 86-92 RX7 Non-Turbo

  Racing Beat’s rotary exhaust Header/Collector is designed for a bolt-on installation, when used with the appropriate Power Pulse Presilencer, in all 1986-92 non-turbo RX-7s. The combination of this Header/Collector and the appropriate presilencer replaces the stock exhaust manifold and all catalytic converters, along with any intermediate pieces of tubing. (In this application, the presilencer will bolt-up to the factory Y-pipe.)

  The Header/Collector assembly is constructed with .120″ wall, mandrel-bent, mild steel tubing (2″ OD primary, 2.5″ OD secondary) for excellent durability and noise suppression. Both flanges are laser cut from 7/16″ thick steel plate for positive gas sealing. An outlet gasket is included. An engine-to-header gasket is available separately if needed. This header is equipped with an oxygen sensor fitting.

  SKU:

  16130

  $389.30
  Add to cart
• 

  EXHAUST HANGER, 2 SLEEVES

  

  Exhaust Hanger, 2 Sleeves

  Go To Our FAQ for Exhaust Hangers to see the locations and part numbers of the hangers for your car.

  SKU:	40-1600-1114
  Manufacturer SKU:	1114-40-160

  $30.14
  Add to cart