Rotary Exhaust Header – Stainless 86-92 RX-7 Non-Turbo

Rotary Exhaust Header – Stainless 86-92 RX-7 Non-Turbo

Stainless steel version of the 16130 Racing Beat RX-7 Header is designed for a bolt-on installation when used with the appropriate Racing Beat Power Pulse Presilencer in all 1986-92 non-turbo RX-7s. This RX-7 header weighs approximately 12 lbs as compared to our 19 lb steel version. The combination of this Racing Beat RX-7 Header and the appropriate presilencer replaces the stock exhaust manifold and all catalytic converters, along with any intermediate pieces of tubing. (In this configuration, the Racing Beat presilencer will bolt-up to the factory Y-pipe.).

The Racing Beat RX-7 Header assembly is constructed using mandrel-bent, 304-stainless steel tubing (2″ OD primary, 2.5″ OD secondary). The engine-to-header and the header outlet flanges are produced from cast 304-stainless steel. These flanges are unique to Racing Beat’s headers and have been designed to offer superior mounting and sealing qualities. This header is equipped with an oxygen sensor fitting. An outlet gasket is included.

Header Installation Instructions

SKU: 16131

Rotary Exhaust Header – Stainless 86-92 RX-7 Non-Turbo

Header Installation Instructions

$497.23


Related Products:

  • MUFFLER ROAD RACE, 86-92 LEFT (DUAL SYSTEM) RACING BEAT

    MUFFLER ROAD RACE, 86-92 LEFT (DUAL SYSTEM) RACING BEAT

    Racing Beat Road Race Muffler, 86-92 Left (Dual System)

    Racing Beat’s Road Race mufflers are intended to bolt-up to the outlets of the Road Race Y-Pipe section (16411) only, and are not compatible with the stock or Racing Beat (16447) y-pipe section. These mufflers can be ordered separately for use in custom applications. With over 25 years of exhaust system production experience, Racing Beat has the ability to match the correct internal muffler canister design to the engine’s exhaust output to provide the optimum combination of sound and performance. This muffler canister is manufactured using 304-stainless steel and features a 2-inch diameter straight-through design for maximum performance gains. Finished with a 3.5-inch polished 304 stainless steel tip, this muffler sounds as good as it looks! All stock hanger positions are retained.

    SKU: 16439
    $345.64
    Add to cart
  • MUFFLER ROAD RACE, 86-92 RIGHT (DUAL SYSTEM) RB

    MUFFLER ROAD RACE, 86-92 RIGHT (DUAL SYSTEM) RACING BEAT

    Racing Beat Road Race Muffler, 86-92 Right Side (Dual System)

    Racing Beat’s Road Race mufflers are intended to bolt-up to the outlets of the Road Race Y-Pipe section (16411) only, and are not compatible with the stock or Racing Beat (16447) y-pipe section. These mufflers can be ordered separately for use in custom applications. With over 25 years of exhaust system production experience, Racing Beat has the ability to match the correct internal muffler canister design to the engine’s exhaust output to provide the optimum combination of sound and performance. This muffler canister is manufactured using 304-stainless steel and features a 2-inch diameter straight-through design for maximum performance gains. Finished with a 3.5-inch polished 304 stainless steel tip, this muffler sounds as good as it looks! All stock hanger positions are retained.

    SKU: 16438
    $345.64
    Add to cart
  • EXHAUST "Y" PIPE-RACING BEAT, 86-92

    EXHAUST “Y” PIPE-RACING BEAT, 86-92

    Racing Beat Exhaust “Y” Pipe, 86-92 

    The Racing Beat Y-pipe for the 1986-92 RX-7 (All Models) is a perfect replacement for a failing stock component. The Racing Beat Y-pipe is slightly larger in diameter than the stock non-turbo Y-pipe, and matches the diameter (2.5″ OD) of the stock TURBO II Y-pipe. Therefore, if you are replacing the muffler(s) on a TURBO II application, and unless the original stock Y-pipe is failing, there is no performance benefit to be gained from the addition of this Y-pipe. This Y-pipe includes the Cat-to-Y-pipe gasket. If needed, the Y-pipe outlet gaskets can be purchased separately. Manufactured by Racing Beat using heavy-walled steel tubing and laser cut flanges then finished with a chrome-plated surface coating for excellent durability.

    Replacement Rubber Exhaust Hangers
    We recommend the replacement of the original rubber exhaust hangers during the installation of any new exhaust component. It is our experience that over time the original rubber hangers can deteriorate, crack, and fail; which can result in the incorrect alignment of the exhaust system.

    SKU: 16447
    $340.73
    Add to cart
  • EXHAUST PRE-SILENCER

    EXHAUST PRE-SILENCER, 89-92 NON TURBO AUTOMATIC TRANSMISSION

    Racing Beat Exhaust Pre-Silencer, 89-92 Non Turbo Automatic Transmission

    SKU: 16409
    $310.46
    Add to cart
  • EXHAUST SYSTEM SINGLE, 86-92 N/A WITH RB REAR MUFFLERS

    EXHAUST SYSTEM SINGLE, 86-92 NON TURBO WITH RACING BEAT REAR MUFFLERS

    Single Exhaust System, 86-92 Non Turbo with Racing Beat Rear Mufflers

    SKU: 16-MZTX-0020RB
    $1,696.18
    Add to cart