EXHAUST CONNECTING PIPE, GSLSE 13B—NLA—
EXHAUST CONNECTING PIPE, GSLSE 13B
Sorry, this item has been discontinued by Mazda.
| SKU: | 40-200B-N304 |
| Manufacturer SKU: | N304-40-200B |
EXHAUST CONNECTING PIPE, GSLSE 13B
Sorry, Mazda has discontinued this pipe.
$0.00
Related Products:
-
EXHAUST SYSTEM DUAL, 13B DUAL PIPE 79-85
Racing Beat 13B 4 Port Dual Pipe Exhaust System 79-85
Will work on 6 Port if not using the actuators.SKU: 16423 -
EXHAUST SYSTEM DUAL, 84-85 13B 6-PORT
EXHAUST SYSTEM DUAL, 84-85 13B 6-PORT
Dual Exhaust System 13B 6 PORT (using injection, has 6-port actuation and O2 sensor), 84-85
Comes with all hardware and an ACV block off plate.SKU: 16-MZTX-4230 -
-
EXHAUST SYSTEM DUAL, 84-85 13B 6 PORT
Racing Beat Dual Exhaust System, 84-85 13B 6 Port (using a carburetor)
SKU: 16424 -
EXHAUST SYSTEM SINGLE, 84-85 13B SE
Racing Beat Single Exhuast System, 84-85 13B SE
Racing Beat offers a complete RX-7 high-performance exhaust system for the 1984-85 13B (GSL-SE) RX-7. This system includes our Road Race Header, a Power-Pulse Presilencer, and our legendary Power Pulse main muffler. The Power Pulse Presilencer unit is equipped with an exhaust backpressure pickup tube that allows the correct operation of the 6-Port intake actuators. Be careful, if you are considering a replacement exhaust system that does not have this important feature, your intake system will not perform correctly and a noticeable decrease in high RPM performance will occur.
These components attach to all stock mounting points, and include all necessary gaskets and hardware. The only component not included is the factory connecting pipe that mounts just ahead of the main muffler. There is no horsepower to be gained by replacing this pipe with a larger diameter assembly. If your factory connecting pipe needs replacing, we suggest you contact your local muffler shop.
These exhaust systems offer excellent horsepower gains when you require a muffled exhaust system for your stock-ported engine. The actual horsepower increase depends on which year/model stock RX-7 exhaust system you are comparing to, but a 22% increase at 7000 rpm is typical. Thanks to the combined efforts of the Power-Pulse Presilencer and the Power Pulse Main muffler, the exhaust noise is only slightly higher than stock, with a very low, pleasant character.
.
SKU: 16421 -
EXHAUST HANGER, 2 SLEEVES
Exhaust Hanger, 2 Sleeves
Go To Our FAQ for Exhaust Hangers to see the locations and part numbers of the hangers for your car.
SKU: 40-1600-1114 Manufacturer SKU: 1114-40-160
You May Also Like:
-
Exhaust Down Pipe 86-92 Non-Turbo Coupes 2 1/2″
Exhaust Down Pipe 86-92 Non-Turbo Coupes 2 1/2″
This Down Pipe is available for custom applications in a 1986-91 RX-7 (excluding convertible) non-turbo application. This 2.5-inch down pipe fits either manual or automatic transmission equipped cars and eliminates the catalytic converter sections.
This down pipe bolts to the stock exhaust manifold, but the use of our presilencer (or a suitable replacement) is required to connect this assembly to the Y-pipe section. If you need to retain a catalytic converter in your exhaust system, you may find a suitable unit offered in the aftermarket. Although the replacement of your stock catalytic converters with a single aftermarket unit is technically NOT legal, this approach may suit your emissions needs. We suggest you contact your local emissions testing facility for more information. Gaskets sold separately.
SKU: S16206 -
SPLIT AIR EXHAUST GASKET, —NLA— 79-80 HEAT EXCHANGER FRONT & REAR
Split Air Exhaust Gasket, 79-80 Split Air Pipe To Catalytic Converter
Heat Exchanger Front and RearSorry, this item has been discontinued by Mazda
SKU: 13-135B-8527 Manufacturer SKU: 8527-13-135B -
-
-
-
EXHAUST HEADER 12A, 81-83 RX7
Racing Beat 12A Exhaust Header, 81-83 RX7. Actual header not shown in photo – oxygen sensor fitting only included on 1984-85 RX-7 GSL-SE header.
This Racing Beat RX-7 Header is designed for a bolt-on installation, when used with the appropriate Racing Beat Power Pulse Presilencer in all 1981-83 RX-7s. The combination of this RX-7 header and the appropriate presilencer replaces the stock exhaust manifold and all catalytic converters for use on racing applications, along with any intermediate pieces of tubing.
The Racing Beat RX-7 header assembly is constructed with .120-inch wall, mandrel-bend, mild steel tubing for increased durability. The engine-to-header flange is laser-cut from 1/2-inch thick steel plate to ensure positive gas sealing. An outlet gasket is included. An engine-to-header gasket is available separately if needed.
SKU: 16010