EXHAUST SYSTEM SINGLE, 84-85 12A MANUAL
Racing Beat Single Exhaust System, 84-85 12A with Manual Transmission
| SKU: | 16417 |
EXHAUST SYSTEM SINGLE, 84-85 12A MANUAL
Racing Beat offers a complete RX-7 high-performance exhaust system for the 1984-85 12A RX-7 (w/manual transmission) which includes our Header/Collector, a Power-Pulse Presilencer, and our legendary Power Pulse main muffler. These components attach to all stock mounting points, and include all necessary gaskets and hardware. The only component not included is the factory connecting pipe that mounts just ahead of the main muffler. There is no horsepower to be gained by replacing this pipe with a larger diameter assembly. If your factory connecting pipe needs replacing, we do offer it separately; the part number is 40-200C-N249.
These exhaust systems offer excellent horsepower gains when you require a muffled exhaust system for your stock-ported engine. The actual horsepower increase depends on which year/model stock RX-7 exhaust system you are comparing to, but a 22% increase at 7000 rpm is typical. Thanks to the combined efforts of the Power-Pulse Presilencer and the Power Pulse Main muffler, the exhaust noise is only slightly higher than stock, with a very low, pleasant character.
$1,121.80
Related Products:
-
EXHAUST SYSTEM DUAL, 12A DUAL PIPE 79-85
Racing Beat Dual Exhaust System, 12A Dual Pipe 79-85
SKU: 16422 -
MUFFLER POWER PULSE, 83-85 ALL RACING BEAT
Racing Beat Power Pulse Muffler, 83-85 All
1983-85 RX-7 Power Pulse Muffler – Racing Beat has been manufacturing replacement muffler canisters for rotary powered vehicles for over 40 years. Ordinary replacement mufflers don’t stand a chance against the extreme temperatures and pounding exhaust gas pulsation generated by the rotary engine. Many of these replacement RX-7 mufflers will quickly burn up the packing material and self-destruct under these harsh conditions. Many years ago Racing Beat discovered an exhaust system supplier deep in the heart of the Italian countryside that was willing to produce Their RX-7 mufflers for them. That was over 30 years ago and they have never looked back! In fact, we can’t ever recall having a complaint with one of their mufflers, they just flat out work. Solid, strong and quiet, they hold up extremely well against the abuse of the harsh rotary exhaust.
The Power Pulse RX-7 Mufflers interchange exactly with the stock RX-7 muffler on the 1983-85 chassis years. The main body of the muffler measures 8 inches in diameter and 18 inches in length. The heavy-duty construction, both internally and externally, ensures a long life. In a typical application, this muffler adds up to 5 HP over the Mazda factory muffler and is as quiet as a stock muffler with an improved note – deep and throaty, with no annoying metallic character. Emissions legal, this muffler bolts to the outlet of the connecting pipe section. Gaskets are not included, but are available separately if needed.
Now may be the time to consider replacing the old rubber muffler hangers on your RX-7. New replacement hangers will ensure correct alignment of the RX-7 muffler canister and tip position in the bumper opening.
SKU: 16432 -
EXHAUST HEADER 12A, 84-85 RX7 (MANUAL TRANSMISSION)
Racing Beat 12A Exhaust Header, 84-85 RX7 with Manual Transmission
Actual header not shown in photo – oxygen sensor fitting only included on 1984-85 RX-7 GSL-SE header.
The Racing Beat RX-7 Header is designed for a bolt-on installation, when used with the appropriate Power Pulse Presilencer in all 1984-85 RX-7s (12A – Manual Transmission). The combination of this RX-7 exhaust header and the appropriate presilencer replaces the stock exhaust manifold and all catalytic converters for use in racing applications, along with any intermediate pieces of tubing.
This RX-7 header assembly is constructed with .120-inch wall, mandrel-bend, mild steel tubing for increased durability. The engine-to-header flange is laser-cut from .5-inch thick steel plate to ensure positive gas sealing. An outlet gasket is included. An engine-to-header gasket is available separately if needed.
SKU: 16012 -
-
EXHAUST PRE-SILENCER, 84-85 12A MANUAL TRANSMISSION
Racing Beat Exhaust Pre-Silencer, 84-85 12A Manual Transmission
SKU: 16401 -
EXHAUST HANGER, 2 SLEEVES
Exhaust Hanger, 2 Sleeves
Go To Our FAQ for Exhaust Hangers to see the locations and part numbers of the hangers for your car.
SKU: 40-1600-1114 Manufacturer SKU: 1114-40-160
You May Also Like:
-
Exhaust Down Pipe 86-92 Non-Turbo Coupes 2 1/2″
Exhaust Down Pipe 86-92 Non-Turbo Coupes 2 1/2″
This Down Pipe is available for custom applications in a 1986-91 RX-7 (excluding convertible) non-turbo application. This 2.5-inch down pipe fits either manual or automatic transmission equipped cars and eliminates the catalytic converter sections.
This down pipe bolts to the stock exhaust manifold, but the use of our presilencer (or a suitable replacement) is required to connect this assembly to the Y-pipe section. If you need to retain a catalytic converter in your exhaust system, you may find a suitable unit offered in the aftermarket. Although the replacement of your stock catalytic converters with a single aftermarket unit is technically NOT legal, this approach may suit your emissions needs. We suggest you contact your local emissions testing facility for more information. Gaskets sold separately.
SKU: S16206 -
-
-
-
-
EXHAUST STUD, RENESIS EXHAUST MANIFOLD TO ENGINE
Exhaust Stud Renesis, Exhaust Manifold to Engine (4 Required)
SKU: 13-708A-SL50 Manufacturer SKU: SL50-13-708A