Road Race Header -Stainless Steel 86-88 RX-7
Road Race Header -Stainless Steel 86-88 RX-7 when using RB Dual Pipe Pre-Silencer #16448
| SKU: | 16134 |
Road Race Header -Stainless Steel 86-88 RX-7
This is the stainless Steel version of the 16128 Road Race header. This Racing Beat Road Race Header is constructed using mandrel-bent 2″ OD 304-grade stainless steel tubing, then polished to a mirror-like shine for a dazzling appearance. The unique Racing Beat designed engine-to-header and the header outlet flanges are cast from 304-stainless steel and surface machined and polished to ensure optimum exhaust gas sealing. These flanges are unique to Racing Beat’s headers and have been designed to offer superior mounting and sealing qualities.
This header is intended for use on all 1986-92 RX-7 13B non-turbo (6-port intake) applications and can be used as the starting component in a custom race exhaust, or mated to the inlet of the Racing Beat Road Race Presilencer section. This header includes a back-pressure pickup tube to allow the correct operation of the 6-port intake acutators equipped on the 1986-88 RX-7 6-port engine. If your engine doesn’t not require the use of the 6-port actutors (they’ve been removed or disabled), then you can use the 1989-92 Racing Beat Road Race Header (w/o the pickup tube) as an alternative.
This header weighs approximately 10 lbs as compared with our 15 lb steel version. Outlet flange gaskets, bolts, and nuts are included. Engine-to-pipe gaskets are not included, but are available separately. An Air Control and Check Valve Cover Plate is required when using this header with a stock intake system. An oxygen sensor fitting is included on this header.
$491.17
Related Products:
-
EXHAUST HANGER, 86-92 @ “Y” PIPE
Exhaust Hanger at “Y” Pipe, 86-92
Go To Our FAQ for Exhaust Hangers to see the locations and part numbers of the hangers for your car.
SKU: 40-060B-N326 Manufacturer SKU: N326-40-060B -
EXHAUST “Y” PIPE RACING BEAT, 86-92 DUAL PIPE SYSTEM
Racing Beat Exhaust “Y” Pipe, 86-92 Dual Pipe System
SKU: 16411 -
EXHAUST HANGER, 86-92 BAND+ SLEEVE
Exhaust Hanger with Steel Band around it and a sleeve, 86-92
Go To Our FAQ for Exhaust Hangers to see the locations and part numbers of the hangers for your car.
SKU: 40-060B-N328 Manufacturer SKU: N328-40-060B -
COVER PLATE AIR CONTROL VALVE, 81-92 (NON-TURBO)
81-92 Non Turbo Intake Manifold cover plate for removed Air Control Valve
SKU: 16325 -
MUFFLER ROAD RACE, 86-92 LEFT (DUAL SYSTEM) RACING BEAT
Racing Beat Road Race Muffler, 86-92 Left (Dual System)
Racing Beat’s Road Race mufflers are intended to bolt-up to the outlets of the Road Race Y-Pipe section (16411) only, and are not compatible with the stock or Racing Beat (16447) y-pipe section. These mufflers can be ordered separately for use in custom applications. With over 25 years of exhaust system production experience, Racing Beat has the ability to match the correct internal muffler canister design to the engine’s exhaust output to provide the optimum combination of sound and performance. This muffler canister is manufactured using 304-stainless steel and features a 2-inch diameter straight-through design for maximum performance gains. Finished with a 3.5-inch polished 304 stainless steel tip, this muffler sounds as good as it looks! All stock hanger positions are retained.
SKU: 16439 -
EXHAUST SYSTEM DUAL, 86-88 6 PORT RACING BEAT
Racing Beat Dual Exhaust System, 86-88 6 Port Non Turbo Manual Transmission
Racing Beat offers the complete Full Stainless Steel Road Race RX-7 Exhaust System for the 1986-88 RX-7. This completely Stainless Steel RX-7 exhaust system is intended for use on RX-7 applications running under the extremes of road racing, drag racing, or any high performance, high RPM application. The Racing Beat Full Stainless Steel RX-7 dual exhaust system has been designed to maximize the exhaust gas scavenging benefits while maintaining reasonable sound level outputs.
NOTE: This exhaust system is not compatible with automatic transmission equipped-vehicles due to interference issues with the bell housing.
The following is included in this RX-7 exhaust system:
1986-88 RX-7 Road Race Header
The Racing Beat Road Race Header for the 1986-88 13B 6-Port chassis features stainless steel construction for excellent durability. Also incorporated with this header is the requisite exhaust back-pressure pickup tube, necessary to assure the correct operation of the 6-port intake actuators mounted on the engine. (If you have removed these intake actuators or have rendered them inoperable, you can install the 1989-92 Road Race system instead.)Road Race Presilencer
Mating to the outlet of the header is the Racing Beat Road Race Presilencer. The straight-through dual presilencer unit offers beneficial sound reducing qualities by trapping a significant level of the harsh rotary exhaust note.Road Race Y-Pipe
The Racing Beat Y-Pipe section routes the exhaust gases exiting the presilencer section to each of the Power Pulse muffler units.Road Race Mufflers (Left and Right Pair)
Sharing the same design technology as our Power Pulse muffler units, the Road Race mufflers (Left and Right) feature all stainless steel construction for superior durability and appearance. Large diameter tubing routes the exhaust gas through each muffler unit, exiting through polished stainless steel tips.SKU: 16451
You May Also Like:
-
EXHAUST STUD, RENESIS EXHAUST MANIFOLD TO ENGINE
Exhaust Stud Renesis, Exhaust Manifold to Engine (4 Required)
SKU: 13-708A-SL50 Manufacturer SKU: SL50-13-708A -
-
MUFFLER UNIVERSAL, POWER PULSE 79-85 RACING BEAT
Racing Beat Universal Power Pulse Muffler, 79-85
In response to numerous requests from customers demanding a very low restriction“street capable” muffler, Racing Beat now offers the Universal Power Pulse PR-Extreme RX-7 Muffler with a 2.75″ OD internal perforated core design to meet the performance demands of high-horsepower ported rotary engines. The Power Pulse PR-Extreme RX-7 Muffler is compatible with all 1979-85 RX-7 muffler rear mounting positions and retains the factory stock appearance; this PR-Extreme RX-7 Muffler includes an inlet of 3″.
The Racing Beat Universal Power Pulse PR-Extreme RX-7 Muffler is manufactured by the same exhaust components manufacturer that has produced the “tried and proven” First Generation RX-7 Power Pulse mufflers (1979-80, 1981-82, and 1984-85) since the mid-1980s. Utilizing a heavy-walled canister shell and extremely durable heat and noise insulating materials, the Racing Beat Power Pulse PR-Extreme RX-7 Muffler is engineered for the high exhaust gas temperatures found in rotary engine applications.
The main body of the muffler canister measures 8 inches in diameter and 18 inches in length. The dual outlet tips are completely chrome-plated with straight-cut outlet.
Now may be the time to consider replacing the old rubber muffler hangers on your RX-7. New replacement hangers will ensure correct alignment of the RX-7 muffler canister and tip position in the bumper opening.
SKU: 16436 -
EXHAUST SYSTEM DUAL, 12A DUAL PIPE 79-85
Racing Beat Dual Exhaust System, 12A Dual Pipe 79-85
SKU: 16422 -
-
Exhaust Down Pipe 86-92 Non-Turbo Coupes 2 1/2″
Exhaust Down Pipe 86-92 Non-Turbo Coupes 2 1/2″
This Down Pipe is available for custom applications in a 1986-91 RX-7 (excluding convertible) non-turbo application. This 2.5-inch down pipe fits either manual or automatic transmission equipped cars and eliminates the catalytic converter sections.
This down pipe bolts to the stock exhaust manifold, but the use of our presilencer (or a suitable replacement) is required to connect this assembly to the Y-pipe section. If you need to retain a catalytic converter in your exhaust system, you may find a suitable unit offered in the aftermarket. Although the replacement of your stock catalytic converters with a single aftermarket unit is technically NOT legal, this approach may suit your emissions needs. We suggest you contact your local emissions testing facility for more information. Gaskets sold separately.
SKU: S16206