1993
Hardcore Racing
-
CLUTCH HARDWARE FOR RACE 7.25″ RALLY TWIN
Race Clutch Hardware for 7.25″ Rally Twin
SKU: 298063RY-HW-725 -
CLUTCH RACE 4.5″ V-DRIVE TURBO + RX8
Race Clutch 4.5, 4.5″ V-Drive
For RX7 Turbo and RX8 Transmission
2-Disc
Works with RX8Great Overall Performance and Value
SKU: 284063 -
CLUTCH RACE 5.5, 5.5″ V-DRIVE TURBO + RX8
Race Clutch 5.5, 5.5″ V-Drive Turbo 2 Disc
Spline – 1×23
Works on RX8 and RX7 Turbo transmissions
SKU: 285063 -
CLUTCH RACE 7.25″ RALLY TWIN DISC TURBO + RX8
Race Clutch 7.25″ Rally For RX7 Turbo and RX8 Transmission
2 disc
Lightweight
1×23 Spline
Works on RX8SKU: 298063RY -
CLUTCH RACE 7.25″ V-DRIVE TURBO + RX8
Race Clutch 7.25, 7.25″ V-Drive for RX7 Turbo + RX8 Transmission
2-disc
1×23 Spline
Open Design Allowing Clean and Cool Running
Low Moment of Inertia (MOI)
Lightweight
Works on RX8SKU: 298063 -
CLUTCH RACE HARDWARE, FOR 4.5″ DOUBLE DISC
Race Clutch Hardware for use with 4.5″ Race Clutches using our Race Flywheels
SKU: 284062-HW-4.5 -
CLUTCH RACE HARDWARE, FOR 5.5″ DOUBLE DISC
Race Clutch Hardware, For 5.5″ Double Disc Race Clutches using our Race Flywheels
SKU: 284063-HW-5.5 -
CLUTCH RACE HARDWARE, FOR 7.25″ TWIN DISC
Race Clutch Hardware, For use with 7.25″ Twin disc Clutches using our Race Flywheels
SKU: 298062-HW-725 -
CLUTCH THROW OUT BEARING FOR 7.25″ RALLY TWIN DISC RACE CLUTCH
CLUTCH THROW OUT BEARING FOR 7.25″ RALLY TWIN DISC RACE CLUTCH
Use with 7.25″ Rally Double Disc Clutch
SKU: 236521B -
CLUTCH THROW OUT BEARING FOR 7.25″ TWIN DISC RACE CLUTCH
CLUTCH THROW OUT BEARING FOR 7.25″ TWIN DISC RACE CLUTCH
Use with 7.25″ Double Disc clutch
SKU: 236520 -
CLUTCH THROW OUT BEARING, FOR 4.5, 5.5 RACE CLUTCH
Clutch Throw Out Bearing for 4.5″, 5.5″ Race Clutches
SKU: 235520 -
Eccentric Shaft Oil Jet – .200 – COMPETITION
Eccentric Shaft Oil Jet – .200 – Competition
This oil jet replaces the factory checkball and spring.
SKU: 11-4110-8553 Manufacturer SKU: 8553-11-411 -
ENDURANCE FLYWHEEL RACE FOR 4.5″ CLUTCH “TURBO” DIAMETER + RX8
Endurance Race Flywheel for 4.5″ Clutch “Turbo” Diameter
Works on RX8Recommended Torque: 1/4″ bolt = 9-10 ft/lbs
Our racing flywheels are the lightest ones we know of – they are specially made for us.
They are made from billet MIL-spec 6061 aluminum and hard anodized to MIL specs.
This one is for 4.5″ diameter racing clutches. The clutches we sell are double disc. Flywheel is 12 1/2″ diameter, 125 tooth, and weighs 5.5 pounds with the friction plate. Does not include the rear counterweight. Hardware to mount flywheel to counterweight (#95179) and clutch to flywheel are not included and available separately.
These are NOT suitable for street driving — serious racing only, specifically road racing.
Bellhousing and starter are what actually determine the diameter of flywheel needed – it is best to measure yours.
SKU: 02-9207-45TBE -
ENDURANCE FLYWHEEL RACE FOR 5.5″ CLUTCH TURBO + RX8
Endurance Race Flywheel For 5.5″ Clutch Turbo
Works with RX8Recommended Torque for 5/16″ bolts = 20 lb/ft
Our racing flywheels are the lightest ones we know of – they are specially made for us.
They are made from billet MIL-spec 6061 aluminum and hard anodized to MIL specs.
This one is for 5.5″ diameter racing clutches. The clutches we sell are double disc. Flywheel is 12 1/2″ diameter, 125 tooth, and weighs 5.3 pounds with the friction plate. Does not include the rear counterweight. Hardware to mount flywheel to counterweight (#95179) and clutch to flywheel are not included and available separately.
These are NOT suitable for street driving — serious racing only, specifically road racing.
Bellhousing and starter are what actually determine the diameter of flywheel needed – it is best to measure yours.
SKU: 02-9207-55TBE -
FLYWHEEL HARDWARE, STEEL 74-92,TURBO, RACE
Steel Flywheel Hardware Kit, 74-92, Turbo, Race
Flywheel to Counterweight Bolt SetSKU: 95179 -
FLYWHEEL Mazdaspeed RACE 5.5″, FOR 5.5″ RACE CLUTCH NA–NLA–
Race Flywheel for 5.5″ Race Clutch. Fits all non-turbo diameter bell housings. (11.75 diameter and 116 tooth)
3.9 LBS
Accepts 5.5″ clutch ONLY
Our Hardware Kit #284063-HW-5.5 will NOT work on this flywheel. Customer must supply their own hardware for this flywheel.
When using this flywheel, you MUST modify your rear counterweight with additional holes and reduce hub diameter.Sorry, this item has been discontinued by Mazda
Click here for a templateSKU: 02-9207-0000 Manufacturer SKU: 0000-02-9207 -
FLYWHEEL RACE FOR 4.5″ CLUTCH “TURBO” DIAMETER + RX8
Race Flywheel for 4.5″ Clutch “Turbo” Diameter
Works on RX8Recommended Torque: 1/4″ bolt = 9-10 ft/lbs
SKU: 02-9207-45TB -
FLYWHEEL RACE FOR 5.5″ CLUTCH TURBO + RX8
Race Flywheel For 5.5″ Clutch Turbo
Works with RX8Recommended Torque for 5/16″ bolts = 20 lb/ft
SKU: 02-9207-55TB -
FLYWHEEL RACE FOR 7.25″ CLUTCH TURBO DIAMETER + RX8
Race Flywheel for 7.25″ Clutch Turbo Diameter
Works on RX8SKU: 02-9207-725TB -
