FLYWHEEL RACE FOR 4.5" CLUTCH "TURBO" DIAMETER + RX8
FLYWHEEL RACE FOR 4.5" CLUTCH "TURBO" DIAMETER + RX8 - Image 2
FLYWHEEL RACE FOR 4.5" CLUTCH "TURBO" DIAMETER + RX8 - Image 3
FLYWHEEL RACE FOR 4.5" CLUTCH "TURBO" DIAMETER + RX8 - Image 4

FLYWHEEL RACE FOR 4.5″ CLUTCH “TURBO” DIAMETER + RX8

Race Flywheel for 4.5″ Clutch “Turbo” Diameter
Works on RX8

Recommended Torque: 1/4″ bolt = 9-10 ft/lbs

SKU: 02-9207-45TB

FLYWHEEL RACE FOR 4.5″ CLUTCH “TURBO” DIAMETER + RX8

Our racing flywheels are the lightest ones we know of – they are specially made for us.

They are made from billet MIL-spec 6061 aluminum and hard anodized to MIL specs.

This one is for 4.5″ diameter racing clutches. The clutches we sell are double disc. Flywheel is 12 1/2″ diameter, 125 tooth, and weighs 4.9 pounds with the friction plate. Does not include the rear counterweight. Hardware to mount flywheel to counterweight (#95179) and clutch to flywheel are not included and available separately.

These are NOT suitable for street driving — serious racing only, specifically road racing.

Bellhousing and starter are what actually determine the diameter of flywheel needed – it is best to measure yours.

$688.00

Related Products:

You May Also Like:

  • CLUTCH DISC RACE, ALL ROTARY -82

    CLUTCH DISC RACE, ALL ROTARY -82

    Racing Beat Race Clutch Disc, All Rotary up to 82, 4 puck

    The 4-Puck 215mm Race Clutch Disc is designed for drag and road race use with all 1971-82 12A & 13B Applications (except Rotary Pick-Up). The disc incorporates four (4) sintered copper pucks and a rigid hub for quick, positive engagement, greater fatigue resistance, and improved heat dissipation. The sharpened engagement/disengagement characteristics of this disc require careful driver attention – this disc is not intended for street use.

    Time Saving Tip: We strongly recommend replacing the throw-out bearing during any clutch work to ensure trouble free performance. Also, we recommend replacing the transmission front and rear seal kit when re-installing the transmission to reduce the possibility of leakage.

    Safety Note: None of the Racing Beat, Exedy, Mazda OE, or any aftermarket flywheel or clutch replacement components should ever be allowed to exceed 10,500 RPM under any condition. You must use an engine RPM-limiter to prevent excessive RPM. If your engine is capable of exceeding 8,500 RPM you must install a transmission scatter shield or ballistic blanket. Failure to implement the above may result in serious injury or even death.

    Actual disc not shown in photo.

    SKU: 12521
    $267.75
    Add to cart