CLUTCH RACE HARDWARE, FOR 7.25" TWIN DISC

CLUTCH RACE HARDWARE, FOR 7.25″ TWIN DISC

Race Clutch Hardware, For use with 7.25″ Twin disc Clutches using our Race Flywheels

SKU: 298062-HW-725

 RACE CLUTCH HARDWARE, FOR 7.25″ TWIN DISC

$14.02

Related Products:

You May Also Like:

  • CLUTCH DISC RACE, ALL ROTARY -82

    CLUTCH DISC RACE, ALL ROTARY -82

    Racing Beat Race Clutch Disc, All Rotary up to 82, 4 puck

    The 4-Puck 215mm Race Clutch Disc is designed for drag and road race use with all 1971-82 12A & 13B Applications (except Rotary Pick-Up). The disc incorporates four (4) sintered copper pucks and a rigid hub for quick, positive engagement, greater fatigue resistance, and improved heat dissipation. The sharpened engagement/disengagement characteristics of this disc require careful driver attention – this disc is not intended for street use.

    Time Saving Tip: We strongly recommend replacing the throw-out bearing during any clutch work to ensure trouble free performance. Also, we recommend replacing the transmission front and rear seal kit when re-installing the transmission to reduce the possibility of leakage.

    Safety Note: None of the Racing Beat, Exedy, Mazda OE, or any aftermarket flywheel or clutch replacement components should ever be allowed to exceed 10,500 RPM under any condition. You must use an engine RPM-limiter to prevent excessive RPM. If your engine is capable of exceeding 8,500 RPM you must install a transmission scatter shield or ballistic blanket. Failure to implement the above may result in serious injury or even death.

    Actual disc not shown in photo.

    SKU: 12521
    $267.75
    Add to cart
  • CLUTCH SLAVE, 74-78 ALL

    CLUTCH SLAVE, 79-80

    Clutch Slave, 79-80

    SKU: 41-9200-8541
    Manufacturer SKU: 8541-41-920
    $45.00
    Add to cart
  • CLUTCH MASTER, 79-80

    CLUTCH MASTER, 79-80

    Clutch Master, 79-80
    Hose comes out straight up

    SKU: 41-4000-8593
    Manufacturer SKU: 8593-41-400
    $58.87
    Add to cart
  • FLYWHEEL ALUMINUM, 74-82 W/O COUNTERWEIGHT

    FLYWHEEL ALUMINUM, 74-82 (Does NOT include counterweight)

    FLYWHEEL ALUMINUM, 74-82 W/O COUNTERWEIGHT

    For 74-82 style CLUTCHES — The actual flywheel ONLY fits 74-92 non-turbos. The CLUTCH HARDWARE  (included) is what differs.
    The 74-82 clutch pressure plate uses no spacers while the 83-92 (non-turbo) pressure plates need the spacers. 

    SKU: 11433
    $550.00
    Add to cart