CLUTCH THROW OUT BEARING, FOR 4.5, 5.5 RACE CLUTCH
CLUTCH THROW OUT BEARING, FOR 4.5, 5.5 RACE CLUTCH

CLUTCH THROW OUT BEARING, FOR 4.5, 5.5 RACE CLUTCH

Clutch Throw Out Bearing for 4.5″, 5.5″ Race Clutches

SKU: 235520

CLUTCH THROW OUT BEARING, FOR 4.5″, 5.5″ RACE CLUTCH

$173.41

Related Products:

You May Also Like:

  • CLUTCH DISC STREET/STRIP HEAVY DUTY, ALL -82

    CLUTCH DISC STREET/STRIP HEAVY DUTY, ALL ROTARY -82

    Racing Beat Clutch Disc Street/Strip Heavy Duty , All Rotary up to 82

    The 215mm Street/Strip HD (Heavy Duty) Disc for all 1971-82 12A & 13B Applications (except Rotary Pick-Up) is similar to the standard Street/Strip Disc, but has an additional feature to increase its strength: twice the number of rivets attaching each friction lining to the clutch plate. The result is a disc that engages quicker (requiring a bit more technique when starting) and releases quicker (making life easier for the transmission synchros). This disc is well suited for high output street engines and interchanges exactly with the stock disc. It can be used with either a stock pressure plate or our Street/Strip Pressure Plate. As with all of our products, it is built only from new parts.

    Time Saving Tip: We strongly recommend replacing the throw-out bearing during any clutch work to ensure trouble free performance. Also, we recommend replacing the transmission front and rear seal kit when re-installing the transmission to reduce the possibility of leakage.

    Safety Note: None of the Racing Beat, Exedy, Mazda OE, or any aftermarket flywheel or clutch replacement components should ever be allowed to exceed 10,500 RPM under any condition. You must use an engine RPM-limiter to prevent excessive RPM. If your engine is capable of exceeding 8,500 RPM you must install a transmission scatter shield or ballistic blanket. Failure to implement the above may result in serious injury or even death.

    Actual disc not shown in photo.

     

    SKU: 12509
    $267.75
    Add to cart
  • REAR COUNTERWEIGHT 83-85 12A

    REAR COUNTERWEIGHT 83-85 12A

    Rear counterweight for 83-85 12A Engines — they have the “N” on the rotors

    These were discontinued by Mazda — We are having them made. 

    We took a few pair of 83-85 12A rotors, weighed them all for an average, set the bobweights for those weights on a 12A eccentric shaft then we re-balance NEW 13B rear counterweights to match. 

    SKU: 11-751A-N226-MOD
    Manufacturer SKU: N226-11-751A-MOD
    $322.24
    Add to cart
  • CLUTCH MASTER, 78- 2/79 RX7

    CLUTCH MASTER, 78- 2/79 RX7

    Clutch Master, 78- 2/79 RX7
    Hose comes out slightly to the driver side

    SKU: 41-400A-8871
    Manufacturer SKU: 8871-41-400A
    $47.46
    Add to cart