Road Race Header – Stainless Steel 89-92 RX-7
Road Race Header – Stainless Steel 89-92 RX-7 when using RB Dual Pipe Pre-Silencer #16448
| SKU: | 16132 |
| Manufacturer SKU: | 16132 |
Road Race Header – Stainless Steel 89-92 RX-7
Road Race Header – 1989-92 RX-7 13B 6-Port
This is a Stainless Steel version of the 16129 Road Race Header. This Racing Beat Road Race Header is constructed using mandrel-bent 2″ OD 304-grade stainless steel tubing, then polished to a mirror-like shine for a dazzling appearance. The unique Racing Beat designed engine-to-header and the header outlet flanges are cast from 304-stainless steel and surface machined and polished to ensure optimum exhaust gas sealing. These flanges are unique to Racing Beat’s headers and have been designed to offer superior mounting and sealing qualities.
This header is intended for use on all 1989-92 RX-7 13B non-turbo (6-port intake) applications and can be used as the starting component in a custom race exhaust, or mated to the inlet of the Racing Beat Road Race Presilencer section.
This header weighs approximately 10 lbs as compared with our 15 lb steel version (#16129). Outlet flange gaskets, bolts, and nuts are included. Engine-to-pipe gaskets are not included, but are available separately. An Air Control and Check Valve Cover Plate is required when using this header with a stock intake system. An oxygen sensor fitting is included on this header.
$465.70
Related Products:
-
EXHAUST MANIFOLD GASKET, 13B 84-85, 89-92 NON TURBO
Exhaust Manifold Gasket, 13B 84-85 6 Port, 89-92 Non Turbo
SKU: 13-461A-N350 Manufacturer SKU: N350-13-461A -
EXHAUST PRE-SILENCER, 86-92 DUAL PIPE
Racing Beat Exhaust Pre-Silencer, 86-92 Dual Pipe With Gasket & Hardware
SKU: 16448 -
EXHAUST “Y” PIPE RACING BEAT, 86-92 DUAL PIPE SYSTEM
Racing Beat Exhaust “Y” Pipe, 86-92 Dual Pipe System
SKU: 16411 -
EXHAUST HANGER, 86-92 @ “Y” PIPE
Exhaust Hanger at “Y” Pipe, 86-92
Go To Our FAQ for Exhaust Hangers to see the locations and part numbers of the hangers for your car.
SKU: 40-060B-N326 Manufacturer SKU: N326-40-060B -
EXHAUST HANGER, 2 SLEEVES
Exhaust Hanger, 2 Sleeves
Go To Our FAQ for Exhaust Hangers to see the locations and part numbers of the hangers for your car.
SKU: 40-1600-1114 Manufacturer SKU: 1114-40-160 -
MUFFLER ROAD RACE, 86-92 LEFT (DUAL SYSTEM) RACING BEAT
Racing Beat Road Race Muffler, 86-92 Left (Dual System)
Racing Beat’s Road Race mufflers are intended to bolt-up to the outlets of the Road Race Y-Pipe section (16411) only, and are not compatible with the stock or Racing Beat (16447) y-pipe section. These mufflers can be ordered separately for use in custom applications. With over 25 years of exhaust system production experience, Racing Beat has the ability to match the correct internal muffler canister design to the engine’s exhaust output to provide the optimum combination of sound and performance. This muffler canister is manufactured using 304-stainless steel and features a 2-inch diameter straight-through design for maximum performance gains. Finished with a 3.5-inch polished 304 stainless steel tip, this muffler sounds as good as it looks! All stock hanger positions are retained.
SKU: 16439
You May Also Like:
-
-
EXHAUST HEADER 13B, 89-92 6PORT DUAL PIPE
Racing Beat 13B Exhaust Header, 89-92 With 6 Port Actuation and O2 sensor fitting.
SKU: 16129 -
EXHAUST CONVERTER GASKET 93-95 MAIN FRONT & REAR
Exhaust Converter Gasket 93-95 Front and Rear of Main
SKU: 40-3050-RF36 Manufacturer SKU: RF36-40-305 -
EXHAUST PRE-SILENCER WITH DOWN PIPE, 88 CONVERTIBLE MANUAL
Racing Beat Exhaust Pre-Silencer with Down Pipe, 88 Convertible Manual Transmission Non-Turbo
Down Pipe with Presilencer – 1988 RX-7 Convertible Non-Turbo (w/Manual Transmission) – The 1986-92 13B 6-port engines, in stock form with the factory fuel injection, produces similar power gains with either our Header/Presilencer combo or our RX-7 Down Pipe/Presilencer combination. If you have no intentions of installing RB’s Holley intake System (or any other aftermarket carb set-up), we recommend the use of the down pipe/Presilencer combo since it offers a slightly quieter exhaust note, is easier to install and less costly. If you are intending to upgrade the intake or fuel injection system, the Header/Presilencer combo offers the greatest performance potential.
The 1988 RX-7 Convertible (w/ Manual Transmission) Down Pipe/Presilencer combination incorporates a 2.5-inch O.D. Down Pipe and our perforated stainless steel core and stainless steel wool-packed Presilencer to boost power approximately 13% – an 18 horsepower increase on a 1987 RX 7- and maintain a comfortable exhaust noise level during full power driving.
The replacement pipe connects to the factory exhaust manifold, and the presilencer connects to the factory Y-pipe, replacing all catalytic converters and intermediate tubing. (The downpipe cannot be used as a “bolt-up” component to replace just the catalytic converters.)
The Racing Beat presilencer is equipped with an exhaust back-pressure tube for correct operation of the 6-port actuators. Installation of this requires the removal of the air control and check valve and the air pump. This kit includes all necessary mounting hardware, air control & check valve cover plate, and gaskets (1 Back Pressure Pick-up and 3 Replacement Pipe-to-Presilencer gaskets).
SKU: 16209 -
EXHAUST HEADER 13B, 79-92 4&6-PORT DUAL OUTLET
Racing Beat 13B Exhaust Header, 79-92 4&6-PORT DUAL OUTLET
SKU: 16127 Manufacturer SKU: 16127 -
EXHAUST SYSTEM DUAL, 13B DUAL PIPE 79-85
Racing Beat 13B 4 Port Dual Pipe Exhaust System 79-85
Will work on 6 Port if not using the actuators.SKU: 16423