EXHAUST MANIFOLD GASKET, 12A 81-85
Exhaust Manifold Gasket, 12A 81-85
| SKU: | 13-889B-1480 |
| Manufacturer SKU: | 1480-13-889B |
EXHAUST MANIFOLD GASKET, 12A 81-85
$26.37
Related Products:
-
SPLIT AIR EXHAUST GASKET, 81-95 PIPE TO CAT
Split Air Exhaust Gasket, 81-95 Split Air Pipe To Cat
SKU: 40-3750-YJZ4 Manufacturer SKU: YJZ4-40-375 -
EXHAUST MUFFLER GASKET, 83-85 —NLA—
This item has been discontinued by Mazda.
Exhaust Muffler Gasket, 83-85
SKU: 40-356A-8182 Manufacturer SKU: 8182-40-356A -
FLANGE CATALYTIC CONVERTER, TO PRESILENCER
Catalytic Converter to PreSilencer Flange (12 mm studs)
SKU: 16195 -
ENGINE TO PIPE FLANGE 12A
12A Engine To Pipe Flange 74-85
This 1/2″ thick laser-cut engine-to-header exhuast flange can be used to fabricate a custom exhaust system for any 1974-85 12A rotary engine. This is the same flange that is used on Racing Beat’s 12A engine- headers.
SKU: 16182 -
EXHAUST CONVERTER GASKET, 81-85 MONO + 84-85(REAR)
81-85 Mono Converters Gasket, 84-85 Rear Main Converter Gasket
SKU: 13-621A-1480 Manufacturer SKU: 1480-13-621A -
EXHAUST CONVERTER GASKET, 81-85-FRONT 81-83-REAR
81-85 Front Main Converter Gasket
81-83 Rear Main Converter GasketSKU: 40-325A-1480 Manufacturer SKU: 1480-40-325A
You May Also Like:
-
-
EXHAUST PRE-SILENCER WITH DOWN PIPE, 88 CONVERTIBLE MANUAL
Racing Beat Exhaust Pre-Silencer with Down Pipe, 88 Convertible Manual Transmission Non-Turbo
Down Pipe with Presilencer – 1988 RX-7 Convertible Non-Turbo (w/Manual Transmission) – The 1986-92 13B 6-port engines, in stock form with the factory fuel injection, produces similar power gains with either our Header/Presilencer combo or our RX-7 Down Pipe/Presilencer combination. If you have no intentions of installing RB’s Holley intake System (or any other aftermarket carb set-up), we recommend the use of the down pipe/Presilencer combo since it offers a slightly quieter exhaust note, is easier to install and less costly. If you are intending to upgrade the intake or fuel injection system, the Header/Presilencer combo offers the greatest performance potential.
The 1988 RX-7 Convertible (w/ Manual Transmission) Down Pipe/Presilencer combination incorporates a 2.5-inch O.D. Down Pipe and our perforated stainless steel core and stainless steel wool-packed Presilencer to boost power approximately 13% – an 18 horsepower increase on a 1987 RX 7- and maintain a comfortable exhaust noise level during full power driving.
The replacement pipe connects to the factory exhaust manifold, and the presilencer connects to the factory Y-pipe, replacing all catalytic converters and intermediate tubing. (The downpipe cannot be used as a “bolt-up” component to replace just the catalytic converters.)
The Racing Beat presilencer is equipped with an exhaust back-pressure tube for correct operation of the 6-port actuators. Installation of this requires the removal of the air control and check valve and the air pump. This kit includes all necessary mounting hardware, air control & check valve cover plate, and gaskets (1 Back Pressure Pick-up and 3 Replacement Pipe-to-Presilencer gaskets).
SKU: 16209 -
-
Exhaust Down Pipe 86-92 Non-Turbo Coupes 2 1/2″
Exhaust Down Pipe 86-92 Non-Turbo Coupes 2 1/2″
This Down Pipe is available for custom applications in a 1986-91 RX-7 (excluding convertible) non-turbo application. This 2.5-inch down pipe fits either manual or automatic transmission equipped cars and eliminates the catalytic converter sections.
This down pipe bolts to the stock exhaust manifold, but the use of our presilencer (or a suitable replacement) is required to connect this assembly to the Y-pipe section. If you need to retain a catalytic converter in your exhaust system, you may find a suitable unit offered in the aftermarket. Although the replacement of your stock catalytic converters with a single aftermarket unit is technically NOT legal, this approach may suit your emissions needs. We suggest you contact your local emissions testing facility for more information. Gaskets sold separately.
SKU: S16206 -
-
