MUFFLER RX8 09-ON, RACING BEAT DUAL TIP—NLA—
Racing Beat Dual Tip Exhaust System RX8 09-11
Sorry, this item has been discontinued by Racing Beat
16393 RX8 Muffler Restraint Instructions
RX8 Exhaust Installation Instructions
The Racing Beat REV8 “Street Legal”, Cat-Back RX-8 Exhaust System (Twin Outlet Tips) is the perfect replacement for your stock exhaust – a durable assembly offering a real horsepower gain over your stock unit. Racing Beat’s RX-8 exhaust system consists of a 304 stainless steel Racing Beat connecting-pipe, muffler canisters, tubing, flanges, and outlet tips. The replacement connecting-pipe is manufactured using 3-inch (OD) tubing and features cast stainless steel flanges for positive exhaust gas sealing. (2009-11 RX-8 exhaust systems differ with regards to the positioning of the outlet tips and are NOT compatible with earlier 2004-08 RX-8 models.)
Twin Tips
The REV8 RX-8 Exhaust system will certainly stand out from the crowd with its distinctive twin tip outlet design! A first of its kind offering for the RX-8, these highly polished stainless steel tips offer a welcome change from the standard single tip design and provide a well-balanced look to the rear of the RX-8. Mirroring the design of the new-for-2009 tail light assembly, the twin tips provide a symmetrical balance from rear facing angles, and maximizes the exhaust openings in the bumper.
Power Output
Utilizing Racing Beat’s in-house dyno test facilities, the Racing Beat engineering staff has undertaken exhaust system extensive testing with the RX-8 Renesis engine. Their research has found that simply adding a large-diameter, “straight-through” muffler is very loud, and power gains are only modest. They focused their development efforts on optimizing the power output, while maintaining a moderate, but aggressive exhaust tone.
Based upon Racing Beat’s initial test sessions, it appeared that the Mazda engineers did not leave much “untapped” horsepower behind in the stock RX-8 exhaust system. Although it appears there might be modest power gains available from a “cat-back” exhaust system, be wary of big horsepower claims from any aftermarket exhaust system.
Racing Beat’s testing has provided the following results:
Stock production engine – with muffler removed +5 HP
Stock production engine – with RB muffler + 3.5 HP
Stock production engine – with aftermarket system “A” muffler + 3.5 HP
Stock production engine – with aftermarket system “B” muffler + -1.5 HP
| SKU: | 16395 |
MUFFLER RX8 09-11, RACING BEAT DUAL TIP
$1,091.48
Related Products:
-
EXHAUST MUFFLER GASKET, FOR RACING BEAT RX8 SPLIT MUFFLER
Exhaust Muffler Gasket, For Racing Beat RX8 Exhaust
This donut style exhaust gasket can be used on Racing Beat RX-8 exhaust systems between the Racing Beat RX-8 connecting pipe section and the Racing Beat RX-8 muffler section. This gasket is not intended for use on the stock exhaust system. The id on this gasket is 3 1/8″ or 78mm
2004-2011 RX-8
This gasket is used at the connection between the Racing Beat RX-8 connecting pipe section and the Racing Beat RX-8 muffler section.SKU: 16343 -
MUFFLER RX8 09-11, RACING BEAT SINGLE TIP
MUFFLER RX8 09-11, RACING BEAT SINGLE TIP
Power Output
Utilizing Racing Beat’s in-house dyno test facilities, the Racing Beat engineering staff has undertaken exhaust system extensive testing with the RX-8 Renesis engine. Their research has found that simply adding a large-diameter, “straight-through” muffler is very loud, and power gains are only modest. They focused their development efforts on optimizing the power output, while maintaining a moderate, but aggressive exhaust tone.Based upon Racing Beat’s initial test sessions, it appeared that the Mazda engineers did not leave much “untapped” horsepower behind in the stock exhaust system. Although it appears there might be modest power gains available from a “cat-back” exhaust system, be wary of big horsepower claims from any aftermarket exhaust system.
Racing Beat’s testing has provided the following results:
Stock production engine – with muffler removed +5 HP
Stock production engine – with RB muffler + 3.5 HP
Stock production engine – with aftermarket system “A” muffler + 3.5 HP
Stock production engine – with aftermarket system “B” muffler + -1.5 HPSKU: 16394 -
EXHAUST HANGER, 04-11 RX8
EXHAUST HANGER, 04-11 RX8 – Fits all locations
SKU: 40-061A-N3H2 Manufacturer SKU: N3H2-40-061A -
EXHAUST CATALYTIC CONVERTER REPLACE PIPE 04-11
Racing Beat Catalytic Converter Replace Pipe, 04-11
Racing Beat REN.V1 RX-8 Race Pipe
Each pipe comes complete with all required mounting hardware, gaskets, and installation instructions.
RX-8 Race Pipe – 2004-2011 RX-8 – Racing Beat offers a full 304-stainless steel catalytic converter replacement pipe for RX-8 racing applications. The weight of this pipe is 10 lbs. This mandrel-bent 3″ OD racing pipe is a direct bolt-on replacement for the stock catalytic converter section. This pipe utilizes a genuine OEM rear mounting flange for a secure fit to the stock (or an aftermarket) exhaust system. (See photo below.) The race pipe is equipped with a sensor fitting for the oxygen sensor. (Note: Placement of the sensor in the pipe will cause the “check engine” light to be illuminated, but performance and engine systems for racing applications will not be affected.) Removal of the OE catalytic converter/presilencer section will result in a noticeably louder exhaust tone.
SKU: 16201 -
EXHAUST MANIFOLD GASKET 04-11 RX8
Exhaust Manifold to engine. Mazda update for ’09 6-layer gasket
SKU: 13-461C-N3H1 Manufacturer SKU: N3H1-13-461C -
EXHAUST MUFFLER GASKET, 04-11 RX8 PIPE to CATALYTIC CONVERTER
Exhaust Muffler Gasket, 04-11 RX8 Muffler Pipe to Catalytic Converter
SKU: 40-5810-L315 Manufacturer SKU: L315-40-581
You May Also Like:
-
EXHAUST SYSTEM DUAL, 13B DUAL PIPE 79-85
Racing Beat 13B 4 Port Dual Pipe Exhaust System 79-85
Will work on 6 Port if not using the actuators.SKU: 16423 -
EXHAUST HEADER 13B, 74-78 NO FLANGE EXCEPT PICK UP
Racing Beat 13B Exhaust Header, 74-78 No Flange. Will not work on the Pick Up
This rotary exhaust Header/Collector (less outlet flange) is ideal for RX-2, RX-3, RX-4, and COSMO (does not fit rotary pickup) custom exhaust installations. The flame-cut, .5-inch thick engine flange provides positive sealing and alignment. By integrating the collector with the header we reduce the effort and cost in completing the exhaust system. Engine-to-pipe gaskets are not included but are available separately. An Air Control and Check Valve Cover Plate is required when using this header with a stock intake system.
If the stock resonator is eliminated during installation of this unit, we strongly recommend selecting a Power Pulse Presilencer and installing it in place of the resonator to maintain a pleasant noise level and character.
SKU: 16007 -
-
-
-
