2010
Fluids, Oils and Premix
-
2 QTS IDEMITSU PREMIX, 1 MEASURING BOTTLE
2 Qts Idemitsu Premix, 1 Measuring Bottle
Inherently with many rotary engines, the entirety of the rotor and housing are not being sufficiently lubricated, resulting in premature wear or damage. In order to increase lubrication within the engine, Idemitsu developed Idemitsu Rotary Premix. At 1/2 oz per gallon of fuel, it is a cost effective way lubricate more of your engine and prevent premature catastrophic damage. The 1/2 oz per gallon of gas is assuming you have a functioning oil metering system. If not, then we recommend 1 oz per gallon. For boosted engines about 2 oz per gallon is recommended.
A special blend of base oils reduces deposits and subsequent exhaust port clogging. As a result, your rotary will maintain the power at which it was designed. Special detergent/dispersant additives keep your fuel injectors clean to reduce maintenance. Provides additional lubrication for apex and side seals to increase seal life and increase efficiency of engine. Special additives allow for better sealing of the chamber, creating greater efficiency and more power.
Note! Do NOT use with ethanol or ethanol based racing fuels! Normal 5-10% alcohol you get at the pumps is fine.
This kit includes:
16 oz(450ml) Measuring Bottle for your Premix. The bottles hold 1/2 of a 32oz Quart of Premix
2 Qts of Idemitsu Rotary PremixOur Mazdatrix Bottle has a neck that allows the funnel to be inserted into the bottle – makes filling the bottle very easy.
SKU: PRE-2QT-1BOT Manufacturer SKU: PRE-2QT-1BOT -
2 Qts Idemitsu Premix, 1 Measuring Bottle, 1 Funnel
2 Qts Idemitsu Premix, 1 Measuring Bottle, 1 Funnel
Inherently with many rotary engines, the entirety of the rotor and housing are not being sufficiently lubricated, resulting in premature wear or damage. In order to increase lubrication within the engine, Idemitsu developed Idemitsu Rotary Premix. At 1/2 oz per gallon of fuel, it is a cost effective way lubricate more of your engine and prevent premature catastrophic damage. The 1/2 oz per gallon of gas is assuming you have a functioning oil metering system. If not, then we recommend 1 oz per gallon. For boosted engines about 2 oz per gallon is recommended.
A special blend of base oils reduces deposits and subsequent exhaust port clogging. As a result, your rotary will maintain the power at which it was designed. Special detergent/dispersant additives keep your fuel injectors clean to reduce maintenance. Provides additional lubrication for apex and side seals to increase seal life and increase efficiency of engine. Special additives allow for better sealing of the chamber, creating greater efficiency and more power.
Note! Do NOT use with ethanol or ethanol based racing fuels! Normal 5-10% alcohol you get at the pumps is fine.
This kit includes:
16 oz(450ml) Measuring Bottle for your Premix. The bottles hold 1/2 of a 32oz Quart of Premix
Flotool Mini 7 inch Funnel
2 Qts of Idemitsu Rotary PremixOur Mazdatrix Bottle has a neck that allows the funnel to be inserted into the bottle – makes filling the bottle very easy.
SKU: PRE-2QT-1BOT-FUN Manufacturer SKU: PRE-2QT-1BOT-FUN -
4 QUARTS IDEMITSU PREMIX + 1 16OZ. MIXING BOTTLE + 1 FUNNEL
4 Quarts Idemitsu Premix + 1 16oz Mixing Bottle + 1 Funnel
Inherently with many rotary engines, the entirety of the rotor and housing are not being sufficiently lubricated, resulting in premature wear or damage. In order to increase lubrication within the engine, Idemitsu developed Idemitsu Rotary Premix. At 1/2 oz per gallon of fuel, it is a cost effective way lubricate more of your engine and prevent premature catastrophic damage. The 1/2 oz per gallon of gas is assuming you have a functioning oil metering system. If not, then we recommend 1 oz per gallon. For boosted engines about 2 oz per gallon is recommended.
A special blend of base oils reduces deposits and subsequent exhaust port clogging. As a result, your rotary will maintain the power at which it was designed. Special detergent/dispersant additives keep your fuel injectors clean to reduce maintenance. Provides additional lubrication for apex and side seals to increase seal life and increase efficiency of engine. Special additives allow for better sealing of the chamber, creating greater efficiency and more power.
Note! Do NOT use with ethanol or ethanol based racing fuels! Normal 5-10% alcohol you get at the pumps is fine.
SKU: PRE-4QT+1BOT+1FUN -
IDEMITSU PREMIX FUEL LUBE 2 QUARTS
Idemitsu 2 Quarts Oil Premix Fuel Lube
Also available in these quantities :1 Quart
4 Quarts
6 Quarts
12 Quarts (Case)SKU: PRE-2QT Manufacturer SKU: PRE-2QT -
IDEMITSU PREMIX FUEL LUBE 4 QUARTS
Idemitsu 4 Quarts Oil Premix Fuel Lube
Inherently with many rotary engines, the entirety of the rotor and housing are not being sufficiently lubricated, resulting in premature wear or damage. In order to increase lubrication within the engine, Idemitsu developed Idemitsu Rotary Premix. At 1/2 oz per gallon of fuel, it is a cost effective way lubricate more of your engine and prevent premature catastrophic damage. The 1/2 oz per gallon of gas is assuming you have a functioning oil metering system. If not, then we recommend 1 oz per gallon. For boosted engines about 2 oz per gallon is recommended.
Also available in these quantities:1 Quart
2 Quarts
6 Quarts
12 Quarts (Case)SKU: PRE-4QT -
IDEMITSU PREMIX FUEL LUBE 6 QUARTS
Idemitsu 6 quarts Oil Premix Fuel Lube
Inherently with many rotary engines, the entirety of the rotor and housing are not being sufficiently lubricated, resulting in premature wear or damage. In order to increase lubrication within the engine, Idemitsu developed Idemitsu Rotary Premix. At 1/2 oz per gallon of fuel, it is a cost effective way lubricate more of your engine and prevent premature catastrophic damage. The 1/2 oz per gallon of gas is assuming you have a functioning oil metering system. If not, then we recommend 1 oz per gallon. For boosted engines about 2 oz per gallon is recommended.
Also available in these quantities:1 Quart
2 Quarts
4 Quarts
12 Quarts (Case)SKU: PRE-6QT -
IDEMITSU PREMIX FUEL LUBE, CASE (12qts)
Idemitsu Premix Case (12 Quarts)
Inherently with many rotary engines, the entirety of the rotor and housing are not being sufficiently lubricated, resulting in premature wear or damage. We Recommend 1/2 oz per gallon of gas assuming you have a functioning oil metering system. If not, then we recommend 1 oz per gallon. For boosted engines about 2 oz per gallon is recommended.
Also available in these quantities:1 Quart
2 Quarts
4 Quarts
6 QuartsSKU: PRE-CASE -
IDEMITSU PREMIX FUEL LUBE, One Quart
Idemitsu Oil Premix Fuel Lube, One Quart
Inherently with many rotary engines, the entirety of the rotor and housing are not being sufficiently lubricated, resulting in premature wear or damage. We Recommend 1/2 oz per gallon of gas assuming you have a functioning oil metering system. If not, then we recommend 1 oz per gallon. For boosted engines about 2 oz per gallon is recommended.
If you want multiple bottles, due to shipping algorithm please see below:2 Quarts
4 Quarts
6 Quarts
12 Quarts (Case)SKU: PRE-1QT -
-
IDEMITSU SYNTHETIC GEAR OIL 75W-90 CASE
Idemitsu Synthetic Gear Oil 75W-90 12 Quart Case
SKU: IDE-75W-90-CS -
-
OIL 10W-30 IDEMITSU 1 QUART
Idemitsu Oil 10W-30 – Per Quart
Engineered specifically to meet the unique requirements of high-performance rotary engines, including turbo and supercharged applications. Fully synthetic advanced Molybdenum formulation is optimized for performance, protection, durability, reduces friction and minimizes deposits.
- With the precise base oil mix of PolyAlphaOlephins and PolyEsters, Idemitsu Rotary Engine Oils are able to minimize deposits on your apex seals
- Allows for better sealing of the chamber, facilitating more power generation
- Extends the life of turbochargers by reducing bearing coking
- Specially developed additives facilitate even tooth load on the front stationary gear to allow for higher loads and higher RPM
- Premium anti-wear agents create a strong film between the main bearings and the eccentric shaft, reducing metal-on-metal contact and minimizing bearing wear
- Developed to reduce entrained gas generation. Entrained gases reduce the oil’s ability to prevent metal-on-metal contact, thereby increasing main bearing wear
- Includes Molybdenum as a friction modifier. This compound reacts with the metal surfaces to create a low-shear boundary. The low shear characteristic reduces friction, increasing efficiency and power output
SKU: IDE-10W-30 -
OIL 10W-30 IDEMITSU CASE (12qts)
Idemitsu Oil 10W-30 – Per 12qt Case
Engineered specifically to meet the unique requirements of high-performance rotary engines, including turbo and supercharged applications. Fully synthetic advanced Molybdenum formulation is optimized for performance, protection, durability, reduces friction and minimizes deposits.
- With the precise base oil mix of PolyAlphaOlephins and PolyEsters, Idemitsu Rotary Engine Oils are able to minimize deposits on your apex seals
- Allows for better sealing of the chamber, facilitating more power generation
- Extends the life of turbochargers by reducing bearing coking
- Specially developed additives facilitate even tooth load on the front stationary gear to allow for higher loads and higher RPM
- Premium anti-wear agents create a strong film between the main bearings and the eccentric shaft, reducing metal-on-metal contact and minimizing bearing wear
- Developed to reduce entrained gas generation. Entrained gases reduce the oil’s ability to prevent metal-on-metal contact, thereby increasing main bearing wear
- Includes Molybdenum as a friction modifier. This compound reacts with the metal surfaces to create a low-shear boundary. The low shear characteristic reduces friction, increasing efficiency and power output
SKU: IDE-10W-30-CS -
OIL 20W-50 IDEMITSU 1 Quart
Idemitsu Oil 20W-50 1 Quart
Engineered specifically to meet the unique requirements of high-performance rotary engines, including turbo and supercharged applications. Fully synthetic advanced Molybdenum formulation is optimized for performance, higher temperature protection, durability, reduces friction and minimizes deposits.
- With the precise base oil mix of PolyAlphaOlephins and PolyEsters, Idemitsu Rotary Engine Oils are able to minimize deposits on your apex seals
- Allows for better sealing of the chamber, facilitating more power generation
- Extends the life of turbochargers by reducing bearing coking
- Specially developed additives facilitate even tooth load on the front stationary gear to allow for higher loads and higher RPM
- Premium anti-wear agents create a strong film between the main bearings and the eccentric shaft, reducing metal-on-metal contact and minimizing bearing wear
- Developed to reduce entrained gas generation. Entrained gases reduce the oil’s ability to prevent metal-on-metal contact, thereby increasing main bearing wear
- Includes Molybdenum as a friction modifier. This compound reacts with the metal surfaces to create a low-shear boundary. The low shear characteristic reduces friction, increasing efficiency and power output
SKU: IDE-20W-50 -
OIL 20W-50 IDEMITSU CASE
Idemitsu Oil 20W-50 Case – Per 12qt Case
Engineered specifically to meet the unique requirements of high-performance rotary engines, including turbo and supercharged applications. Fully synthetic advanced Molybdenum formulation is optimized for performance, higher temperature protection, durability, reduces friction and minimizes deposits.
- With the precise base oil mix of PolyAlphaOlephins and PolyEsters, Idemitsu Rotary Engine Oils are able to minimize deposits on your apex seals
- Allows for better sealing of the chamber, facilitating more power generation
- Extends the life of turbochargers by reducing bearing coking
- Specially developed additives facilitate even tooth load on the front stationary gear to allow for higher loads and higher RPM
- Premium anti-wear agents create a strong film between the main bearings and the eccentric shaft, reducing metal-on-metal contact and minimizing bearing wear
- Developed to reduce entrained gas generation. Entrained gases reduce the oil’s ability to prevent metal-on-metal contact, thereby increasing main bearing wear
- Includes Molybdenum as a friction modifier. This compound reacts with the metal surfaces to create a low-shear boundary. The low shear characteristic reduces friction, increasing efficiency and power output
SKU: IDE-20W-50-CS -
ONE QUART IDEMITSU PREMIX + 2 16OZ. MIXING BOTTLES + 1 FUNNEL
This Is the perfect Premix Starter Kit. It contains 1 Quart of Idemitsu Premix + 2 16oz. Mixing Bottles + 1 Funnel.
One quart fills both the premix bottles. The funnel fits nicely inside the neck of the mixing bottles and in the gas filler neck.Inherently with many rotary engines, the entirety of the rotor and housing are not being sufficiently lubricated, resulting in premature wear or damage. In order to increase lubrication within the engine, Idemitsu developed Idemitsu Rotary Premix. At 1/2 oz per gallon of fuel, it is a cost effective way lubricate more of your engine and prevent premature catastrophic damage. The 1/2 oz per gallon of gas is assuming you have a functioning oil metering system. If not, then we recommend 1 oz per gallon. For boosted engines about 2 oz per gallon is recommended.
A special blend of base oils reduces deposits and subsequent exhaust port clogging. As a result, your rotary will maintain the power at which it was designed. Special detergent/dispersant additives keep your fuel injectors clean to reduce maintenance. Provides additional lubrication for apex and side seals to increase seal life and increase efficiency of engine. Special additives allow for better sealing of the chamber, creating greater efficiency and more power.
Note! Do NOT use with ethanol or ethanol based racing fuels! Normal 5-10% alcohol you get at the pumps is fine.
SKU: PRE-1QT+2BOT+1FUN -
PREMIX BOTTLE, 1 BOTTLE ONLY
Premix Measuring Bottle, 1 Bottle Only
One Premix bottle (premix NOT included). Each bottle is 16oz. Makes it easier to measure what you are putting in the gas tank.
We recommend about 1/2 ounce per gallon of gas for cars with the oil metering system working, about 1 ounce per gallon if you do not have a metering system, and maybe 2 ounces per gallon for boosted engines.
SKU: PRE-BOTTLE -
Premix EZ Premier Kit
Premix EZ Premier Kit
2 (16 oz.) Measuring Bottles, 1 Funnel, 1 Quart Premix, Large Carrying Case, 1 Shop Towel
You can order additional Idemitsu Premix here:1 Quart
2 Quarts
4 Quarts
6 Quarts
12 Quarts (Case)Inherently with many rotary engines, the entirety of the rotor and housing are not being sufficiently lubricated, resulting in premature wear or damage. In order to increase lubrication within the engine, Idemitsu developed Idemitsu Rotary Premix. At 1/2 oz per gallon of fuel, it is a cost effective way lubricate more of your engine and prevent premature catastrophic damage. The 1/2 oz per gallon of gas is assuming you have a functioning oil metering system. If not, then we recommend 1 oz per gallon. For boosted engines about 2 oz per gallon is recommended.
A special blend of base oils reduces deposits and subsequent exhaust port clogging. As a result, your rotary will maintain the power at which it was designed. Special detergent/dispersant additives keep your fuel injectors clean to reduce maintenance. Provides additional lubrication for apex and side seals to increase seal life and increase efficiency of engine. Special additives allow for better sealing of the chamber, creating greater efficiency and more power.
This kit is designed for an easy way to carry your premix. The one quart of premix (included) fits in the two 16oz. bottles. Also included is a funnel and a cloth shop towel. All in a convenient clear carrying case so you can see exactly what you have. Plus everything is in one place in your trunk. The approximate dimensions of this case are 14″x11″x3″
Note! Do NOT use with ethanol or ethanol based racing fuels! Normal 5-10% alcohol you get at the pumps is fine.
This kit includes:
2 (16 oz.) Measuring Bottles
1 Funnel
1 Quart Premix
Large Carrying Case
1 Shop TowelOur Mazdatrix Bottle has a neck that allows the funnel to be inserted into the bottle – makes filling the bottle very easy.
SKU: EZ-Premier-Kit -
Premix EZ Quick Kit
Premix EZ Quick Kit
This kit includes:
2 (16 oz.) Measuring Bottles
1 Funnel
Small Carrying Case
1 Shop Towel
You can order Idemitsu Premix here:1 Quart
2 Quarts
4 Quarts
6 Quarts
12 Quarts (Case)Inherently with many rotary engines, the entirety of the rotor and housing are not being sufficiently lubricated, resulting in premature wear or damage. In order to increase lubrication within the engine, Idemitsu developed Idemitsu Rotary Premix. At 1/2 oz per gallon of fuel, it is a cost effective way lubricate more of your engine and prevent premature catastrophic damage. The 1/2 oz per gallon of gas is assuming you have a functioning oil metering system. If not, then we recommend 1 oz per gallon. For boosted engines about 2 oz per gallon is recommended.
A special blend of base oils reduces deposits and subsequent exhaust port clogging. As a result, your rotary will maintain the power at which it was designed. Special detergent/dispersant additives keep your fuel injectors clean to reduce maintenance. Provides additional lubrication for apex and side seals to increase seal life and increase efficiency of engine. Special additives allow for better sealing of the chamber, creating greater efficiency and more power.
Note! Do NOT use with ethanol or ethanol based racing fuels! Normal 5-10% alcohol you get at the pumps is fine.
This kit is designed for an easy way to carry your premix. One quart of premix fits in the two 16oz. bottles. Also included is a funnel and a cloth shop towel. All in a convenient clear carrying case so you can see exactly what you have. Plus everything is in one place in your trunk. The approximate dimensions of this case are 10″x10″x3″.
Our Mazdatrix Bottle has a neck that allows the funnel to be inserted into the bottle – makes filling the bottle very easy.
SKU: EZ-Quick-Kit -
