OIL 10W-30 IDEMITSU 1 QUART

Idemitsu Oil 10W-30 – Per Quart

Engineered specifically to meet the unique requirements of high-performance rotary engines, including turbo and supercharged applications. Fully synthetic advanced Molybdenum formulation is optimized for performance, protection, durability, reduces friction and minimizes deposits.

  • With the precise base oil mix of PolyAlphaOlephins and PolyEsters, Idemitsu Rotary Engine Oils are able to minimize deposits on your apex seals
  • Allows for better sealing of the chamber, facilitating more power generation
  • Extends the life of turbochargers by reducing bearing coking
  • Specially developed additives facilitate even tooth load on the front stationary gear to allow for higher loads and higher RPM
  • Premium anti-wear agents create a strong film between the main bearings and the eccentric shaft, reducing metal-on-metal contact and minimizing bearing wear
  • Developed to reduce entrained gas generation. Entrained gases reduce the oil’s ability to prevent metal-on-metal contact, thereby increasing main bearing wear
  • Includes Molybdenum as a friction modifier. This compound reacts with the metal surfaces to create a low-shear boundary. The low shear characteristic reduces friction, increasing efficiency and power output

 

SKU: IDE-10W-30

OIL 10W-30 IDEMITSU 1 QUART

$13.18


Related Products:

  • OIL FILTER, ALL RX -92

    OIL FILTER, ALL RX -92

    Oil Filter, All Years

    SKU: 14-302A-G6Y0
    Manufacturer SKU: G6Y0-14-302A
    $9.16
    Add to cart
  • IDEMITSU PREMIX FUEL LUBE, One Quart

    IDEMITSU PREMIX FUEL LUBE, One Quart

    Idemitsu Oil Premix Fuel Lube, One Quart

    Inherently with many rotary engines, the entirety of the rotor and housing are not being sufficiently lubricated, resulting in premature wear or damage. We Recommend 1/2 oz per gallon of gas assuming you have a functioning oil metering system. If not, then we recommend 1 oz per gallon. For boosted engines about 2 oz per gallon is recommended.


    If you want multiple bottles, due to shipping algorithm please see below:

    2 Quarts
    4 Quarts
    6 Quarts
    12 Quarts (Case)

    SKU: PRE-1QT
    $8.21
    Add to cart
  • OIL 20W-50 IDEMITSU CASE

    Idemitsu Oil 20W-50 Case – Per 12qt Case

    Engineered specifically to meet the unique requirements of high-performance rotary engines, including turbo and supercharged applications. Fully synthetic advanced Molybdenum formulation is optimized for performance, higher temperature protection, durability, reduces friction and minimizes deposits.

    • With the precise base oil mix of PolyAlphaOlephins and PolyEsters, Idemitsu Rotary Engine Oils are able to minimize deposits on your apex seals
    • Allows for better sealing of the chamber, facilitating more power generation
    • Extends the life of turbochargers by reducing bearing coking
    • Specially developed additives facilitate even tooth load on the front stationary gear to allow for higher loads and higher RPM
    • Premium anti-wear agents create a strong film between the main bearings and the eccentric shaft, reducing metal-on-metal contact and minimizing bearing wear
    • Developed to reduce entrained gas generation. Entrained gases reduce the oil’s ability to prevent metal-on-metal contact, thereby increasing main bearing wear
    • Includes Molybdenum as a friction modifier. This compound reacts with the metal surfaces to create a low-shear boundary. The low shear characteristic reduces friction, increasing efficiency and power output
    SKU: IDE-20W-50-CS
    $153.67
    Add to cart
  • OIL 20W-50 IDEMITSU 1 Quart

    OIL 20W-50 IDEMITSU 1 Quart

    Idemitsu Oil 20W-50 1 Quart

     

    Engineered specifically to meet the unique requirements of high-performance rotary engines, including turbo and supercharged applications. Fully synthetic advanced Molybdenum formulation is optimized for performance, higher temperature protection, durability, reduces friction and minimizes deposits.

    • With the precise base oil mix of PolyAlphaOlephins and PolyEsters, Idemitsu Rotary Engine Oils are able to minimize deposits on your apex seals
    • Allows for better sealing of the chamber, facilitating more power generation
    • Extends the life of turbochargers by reducing bearing coking
    • Specially developed additives facilitate even tooth load on the front stationary gear to allow for higher loads and higher RPM
    • Premium anti-wear agents create a strong film between the main bearings and the eccentric shaft, reducing metal-on-metal contact and minimizing bearing wear
    • Developed to reduce entrained gas generation. Entrained gases reduce the oil’s ability to prevent metal-on-metal contact, thereby increasing main bearing wear
    • Includes Molybdenum as a friction modifier. This compound reacts with the metal surfaces to create a low-shear boundary. The low shear characteristic reduces friction, increasing efficiency and power output
    SKU: IDE-20W-50
    $13.97
    Add to cart
  • OIL 10W-30 IDEMITSU CASE (12qts)

    OIL 10W-30 IDEMITSU CASE (12qts)

    Idemitsu Oil 10W-30 Per 12qt Case

    Engineered specifically to meet the unique requirements of high-performance rotary engines, including turbo and supercharged applications. Fully synthetic advanced Molybdenum formulation is optimized for performance, protection, durability, reduces friction and minimizes deposits.

    • With the precise base oil mix of PolyAlphaOlephins and PolyEsters, Idemitsu Rotary Engine Oils are able to minimize deposits on your apex seals
    • Allows for better sealing of the chamber, facilitating more power generation
    • Extends the life of turbochargers by reducing bearing coking
    • Specially developed additives facilitate even tooth load on the front stationary gear to allow for higher loads and higher RPM
    • Premium anti-wear agents create a strong film between the main bearings and the eccentric shaft, reducing metal-on-metal contact and minimizing bearing wear
    • Developed to reduce entrained gas generation. Entrained gases reduce the oil’s ability to prevent metal-on-metal contact, thereby increasing main bearing wear
    • Includes Molybdenum as a friction modifier. This compound reacts with the metal surfaces to create a low-shear boundary. The low shear characteristic reduces friction, increasing efficiency and power output

     

    SKU: IDE-10W-30-CS
    $144.98
    Add to cart