1989
Hardcore Racing
-
BOTTOM STARTER STUD, 74-92 ALL
Bottom Starter Stud, 74-92 All
Tired of trying to find that ONE COARSE thread bolt for the bottom of the starter?
Replace it with this coarse/fine stud and use the same nut / thread as all the other bellhousing bolts!SKU: STUD10x1.5-1.25 -
CLUTCH HARDWARE FOR RACE 7.25″ RALLY TWIN
Race Clutch Hardware for 7.25″ Rally Twin
SKU: 298063RY-HW-725 -
CLUTCH RACE 4.5″ V-DRIVE NON TURBO
Clutch Race 4.5″ V-Drive
For RX7 Non Turbo Transmission
SKU: 284062 -
CLUTCH RACE 4.5″ V-DRIVE TURBO + RX8
Race Clutch 4.5, 4.5″ V-Drive
For RX7 Turbo and RX8 Transmission
2-Disc
Works with RX8Great Overall Performance and Value
SKU: 284063 -
CLUTCH RACE 5.5, 5.5″ V-DRIVE NON TURBO
Race Clutch 5.5, 5.5″ V-Drive Non-Turbo 2-Disc
Spline – 1×22SKU: 285062 -
CLUTCH RACE 5.5, 5.5″ V-DRIVE TURBO + RX8
Race Clutch 5.5, 5.5″ V-Drive Turbo 2 Disc
Spline – 1×23
Works on RX8 and RX7 Turbo transmissions
SKU: 285063 -
CLUTCH RACE 7.25″ NON TURBO
Race Clutch 7.25″ For RX7 Non-Turbotransmission
2 Disc
1×22 SplineSKU: 298062 -
CLUTCH RACE 7.25″ RALLY NON TURBO
Race Clutch 7.25, 7.25″ V-Drive Rally for RX7 Non Turbo Transmission
2 disc
1×22 Spline
SKU: 298062RY -
CLUTCH RACE 7.25″ RALLY TWIN DISC TURBO + RX8
Race Clutch 7.25″ Rally For RX7 Turbo and RX8 Transmission
2 disc
Lightweight
1×23 Spline
Works on RX8SKU: 298063RY -
CLUTCH RACE 7.25″ V-DRIVE TURBO + RX8
Race Clutch 7.25, 7.25″ V-Drive for RX7 Turbo + RX8 Transmission
2-disc
1×23 Spline
Open Design Allowing Clean and Cool Running
Low Moment of Inertia (MOI)
Lightweight
Works on RX8SKU: 298063 -
CLUTCH RACE HARDWARE, FOR 4.5″ DOUBLE DISC
Race Clutch Hardware for use with 4.5″ Race Clutches using our Race Flywheels
SKU: 284062-HW-4.5 -
CLUTCH RACE HARDWARE, FOR 5.5″ DOUBLE DISC
Race Clutch Hardware, For 5.5″ Double Disc Race Clutches using our Race Flywheels
SKU: 284063-HW-5.5 -
CLUTCH RACE HARDWARE, FOR 7.25″ TWIN DISC
Race Clutch Hardware, For use with 7.25″ Twin disc Clutches using our Race Flywheels
SKU: 298062-HW-725 -
CLUTCH THROW OUT BEARING FOR 7.25″ RALLY TWIN DISC RACE CLUTCH
CLUTCH THROW OUT BEARING FOR 7.25″ RALLY TWIN DISC RACE CLUTCH
Use with 7.25″ Rally Double Disc Clutch
SKU: 236521B -
CLUTCH THROW OUT BEARING FOR 7.25″ TWIN DISC RACE CLUTCH
CLUTCH THROW OUT BEARING FOR 7.25″ TWIN DISC RACE CLUTCH
Use with 7.25″ Double Disc clutch
SKU: 236520 -
CLUTCH THROW OUT BEARING, FOR 4.5, 5.5 RACE CLUTCH
Clutch Throw Out Bearing for 4.5″, 5.5″ Race Clutches
SKU: 235520 -
Eccentric Shaft Oil Jet – .200 – COMPETITION
Eccentric Shaft Oil Jet – .200 – Competition
This oil jet replaces the factory checkball and spring.
SKU: 11-4110-8553 Manufacturer SKU: 8553-11-411 -
ENDURANCE FLYWHEEL RACE FOR 4.5″ CLUTCH “TURBO” DIAMETER + RX8
Endurance Race Flywheel for 4.5″ Clutch “Turbo” Diameter
Works on RX8Recommended Torque: 1/4″ bolt = 9-10 ft/lbs
Our racing flywheels are the lightest ones we know of – they are specially made for us.
They are made from billet MIL-spec 6061 aluminum and hard anodized to MIL specs.
This one is for 4.5″ diameter racing clutches. The clutches we sell are double disc. Flywheel is 12 1/2″ diameter, 125 tooth, and weighs 5.5 pounds with the friction plate. Does not include the rear counterweight. Hardware to mount flywheel to counterweight (#95179) and clutch to flywheel are not included and available separately.
These are NOT suitable for street driving — serious racing only, specifically road racing.
Bellhousing and starter are what actually determine the diameter of flywheel needed – it is best to measure yours.
SKU: 02-9207-45TBE -
ENDURANCE FLYWHEEL RACE FOR 5.5″ CLUTCH TURBO + RX8
Endurance Race Flywheel For 5.5″ Clutch Turbo
Works with RX8Recommended Torque for 5/16″ bolts = 20 lb/ft
Our racing flywheels are the lightest ones we know of – they are specially made for us.
They are made from billet MIL-spec 6061 aluminum and hard anodized to MIL specs.
This one is for 5.5″ diameter racing clutches. The clutches we sell are double disc. Flywheel is 12 1/2″ diameter, 125 tooth, and weighs 5.3 pounds with the friction plate. Does not include the rear counterweight. Hardware to mount flywheel to counterweight (#95179) and clutch to flywheel are not included and available separately.
These are NOT suitable for street driving — serious racing only, specifically road racing.
Bellhousing and starter are what actually determine the diameter of flywheel needed – it is best to measure yours.
SKU: 02-9207-55TBE -
FLYWHEEL HARDWARE, STEEL 74-92,TURBO, RACE
Steel Flywheel Hardware Kit, 74-92, Turbo, Race
Flywheel to Counterweight Bolt SetSKU: 95179