CLUTCH RACE 7.25″ NON TURBO
Race Clutch 7.25″ For RX7 Non-Turbotransmission
2 Disc
1×22 Spline
| SKU: | 298062 |
CLUTCH RACE 7.25″ NON TURBO
7.25″ V-Drive, 2 disc
Open Design Allowing Clean and Cool Running
Low Moment of Inertia (MOI)
Lightweight
$635.63
Related Products:
-
CLUTCH RACE HARDWARE, FOR 7.25″ TWIN DISC
Race Clutch Hardware, For use with 7.25″ Twin disc Clutches using our Race Flywheels
SKU: 298062-HW-725 -
PILOT BEARING TOOLS, INSTALLER & REMOVER
Mazda Rotary Engine Pilot Bearing Tools Remover and Installer Kit
SKU: KIT-PILOT-TOOLS -
CLUTCH PILOT BEARING, ALL ROTARY 74-ON
Clutch Pilot Bearing, All Rotary 74-11
SKU: 11-D030-N326 Manufacturer SKU: N326-11-D03 -
CLUTCH THROW OUT BEARING FOR 7.25″ TWIN DISC RACE CLUTCH
CLUTCH THROW OUT BEARING FOR 7.25″ TWIN DISC RACE CLUTCH
Use with 7.25″ Double Disc clutch
SKU: 236520 -
FLYWHEEL HARDWARE, STEEL 74-92,TURBO, RACE
Steel Flywheel Hardware Kit, 74-92, Turbo, Race
Flywheel to Counterweight Bolt SetSKU: 95179 -
CLUTCH PILOT SEAL, ALL ROTARY 74-ON
Clutch Pilot Seal, All Rotary 74-On
SKU: 11-404A-1881 Manufacturer SKU: 1881-11-404A
You May Also Like:
-
CLUTCH MASTER, 79-80
Clutch Master, 79-80
Hose comes out straight upSKU: 41-4000-8593 Manufacturer SKU: 8593-41-400 -
CLUTCH KIT, 79-82
Clutch Kit, 79-82
Stock/Original EquipmentOEM Street Clutch Kit
Includes Disc, Pressure Plate, T/O Bearing, Pilot Bearing and seal, and Alignment ToolWe open every Exedy Kit to make sure that the correct Pilot Bearing and seal are included, due to Exedy rarely includes the pilot seal and sometimes has the incorrect bearing.
SKU: 07020 Manufacturer SKU: 07020 -
CLUTCH FORK BOOT 74-92 NON-TURBO
Clutch Fork Boot 74-92 Non-Turbo
SKU: 16-214A-3975 Manufacturer SKU: 3975-16-214A -
CLUTCH DISC SPORT/RACE, ALL-82 4 PUCK SPRUNG
Racing Beat Sport/Race Clutch Disc, All up to 82 4 Puck Sprung
SKU: 12528 -
TRANSMISSION MOUNT REAR 74-85 COMPETITION–NLA–
Sorry, this item has been discontinued by Mazda
Rear Transmission Mount, 74-85 All Manual Transimission, Competition
SKU: 39-3400-4352 Manufacturer SKU: 4352-39-340 -
CLUTCH DISC STREET/STRIP HEAVY DUTY, ALL ROTARY -82
Racing Beat Clutch Disc Street/Strip Heavy Duty , All Rotary up to 82
The 215mm Street/Strip HD (Heavy Duty) Disc for all 1971-82 12A & 13B Applications (except Rotary Pick-Up) is similar to the standard Street/Strip Disc, but has an additional feature to increase its strength: twice the number of rivets attaching each friction lining to the clutch plate. The result is a disc that engages quicker (requiring a bit more technique when starting) and releases quicker (making life easier for the transmission synchros). This disc is well suited for high output street engines and interchanges exactly with the stock disc. It can be used with either a stock pressure plate or our Street/Strip Pressure Plate. As with all of our products, it is built only from new parts.
Time Saving Tip: We strongly recommend replacing the throw-out bearing during any clutch work to ensure trouble free performance. Also, we recommend replacing the transmission front and rear seal kit when re-installing the transmission to reduce the possibility of leakage.
Safety Note: None of the Racing Beat, Exedy, Mazda OE, or any aftermarket flywheel or clutch replacement components should ever be allowed to exceed 10,500 RPM under any condition. You must use an engine RPM-limiter to prevent excessive RPM. If your engine is capable of exceeding 8,500 RPM you must install a transmission scatter shield or ballistic blanket. Failure to implement the above may result in serious injury or even death.
Actual disc not shown in photo.
SKU: 12509