1986
Hardcore Racing
-
FLYWHEEL HARDWARE, STEEL 74-92,TURBO, RACE
Steel Flywheel Hardware Kit, 74-92, Turbo, Race
Flywheel to Counterweight Bolt SetSKU: 95179 -
FLYWHEEL Mazdaspeed RACE 5.5″, FOR 5.5″ RACE CLUTCH NA–NLA–
Race Flywheel for 5.5″ Race Clutch. Fits all non-turbo diameter bell housings. (11.75 diameter and 116 tooth)
3.9 LBS
Accepts 5.5″ clutch ONLY
Our Hardware Kit #284063-HW-5.5 will NOT work on this flywheel. Customer must supply their own hardware for this flywheel.
When using this flywheel, you MUST modify your rear counterweight with additional holes and reduce hub diameter.Sorry, this item has been discontinued by Mazda
Click here for a templateSKU: 02-9207-0000 Manufacturer SKU: 0000-02-9207 -
FLYWHEEL RACE FOR 4.5″ CLUTCH “TURBO” DIAMETER + RX8
Race Flywheel for 4.5″ Clutch “Turbo” Diameter
Works on RX8Recommended Torque: 1/4″ bolt = 9-10 ft/lbs
SKU: 02-9207-45TB -
FLYWHEEL RACE FOR 4.5″ CLUTCH Non-Turbo
Race Flywheel For 4.5″ Clutch Non-Turbo
Recommended Torque: 1/4″ bolt = 9-10 ft/lbs
SKU: 02-9207-45NA -
FLYWHEEL RACE FOR 5.5″ CLUTCH NON TURBO DIAMETER
Race Flywheel For 5.5″ Clutch Non Turbo Diameter
Recommended Torque for 5/16″ bolts = 20 lb/ft
SKU: 02-9207-55NA -
FLYWHEEL RACE FOR 5.5″ CLUTCH TURBO + RX8
Race Flywheel For 5.5″ Clutch Turbo
Works with RX8Recommended Torque for 5/16″ bolts = 20 lb/ft
SKU: 02-9207-55TB -
FLYWHEEL RACE FOR 7.25″ CLUTCH NON TURBO DIAMETER
Race Flywheel For 7.25″ Clutch Non Turbo Diameter
SKU: 02-9207-725NT -
FLYWHEEL RACE FOR 7.25″ CLUTCH TURBO DIAMETER + RX8
Race Flywheel for 7.25″ Clutch Turbo Diameter
Works on RX8SKU: 02-9207-725TB -
-
FLYWHEEL RACE REPLACEMENT FRICTION PLATE 7.25″ N/A
Race Flywheel Replacement Friction Plate 7.25″ Non Turbo
This is a replacement friction plate for our 7.25″ race flywheel for the non-turbo diameter (11 3/4″).
New bolts and nuts for installation are included.
Note: The bellhousing and starter determine the diameter of flywheel needed, With all the race car transmission combinations out there Turbo versus non-turbo can sometimes be not the best definition – better to measure your flywheel diameter.
SKU: HS7450 -
FLYWHEEL RACE REPLACEMENT FRICTION PLATE 7.25″ TURBO
Race Flywheel Replacement Friction Plate 7.25″ Turbo
Works on RX8This is a replacement friction plate for our 7.25″ race flywheel for the Turbo diameter (12 1/2″).
New bolts and nuts for installation are included.
Note: The bellhousing and starter determine the diameter of flywheel needed, With all the race car transmission combinations out there Turbo versus non-turbo can sometimes be not the best definition – better to measure your flywheel diameter.
SKU: HS50603 -
FLYWHEEL REPLACEMENT FRICTION SURFACE FOR MAZDATRIX 225mm ALUMINUM FLYWHEEL
Flywheel Replacement Friction Plate for MAZDATRIX 225mm (9″) Non Turbo flywheel.
This is a replacement friction plate for our 225mm ALUMINUM flywheel for the non-turbo diameter (11 3/4″) flywheel.
New bolts and nuts for installation are included.
Note: The bellhousing and starter determine the diameter of flywheel needed, With all the race / street car transmission combinations out there Turbo versus non-turbo can sometimes be not the best definition – better to measure your flywheel diameter.
SKU: HS9057 Manufacturer SKU: HS9057 -
FLYWHEEL REPLACEMENT FRICTION SURFACE FOR MAZDATRIX 240mm ALUMINUM FLYWHEEL
Flywheel Replacement Friction Plate for MAZDATRIX 225mm (9″) Non Turbo flywheel.
This is a replacement friction plate for our 240mm ALUMINUM flywheel for the Turbo / RX8 12-1/2″ diameter flywheel.
New bolts and nuts for installation are included.
Note: The bellhousing and starter determine the diameter of flywheel needed, With all the race / street car transmission combinations out there Turbo versus non-turbo can sometimes be not the best definition – better to measure your flywheel diameter.
SKU: HS9587T Manufacturer SKU: HS9587T -
NON-TURBO Diameter MAZDATRIX ALUMINUM FLYWHEEL 83-92
83-92 NON-TURBO Diameter MAZDATRIX ALUMINUM FLYWHEEL
Mazdatrix designed aluminum flywheel.
With our flywheel the pressure plate bolts directly to the flywheel and uses the original style locating dowels, eliminating the need for separate spacers.
Comes with all necessary hardware.Flywheel is 11 3/4″ Diameter which fits ALL Non-Turbo Transmissions from ~1974-1991. It uses a 225mm CLUTCH which is standard from ’83 – 1991.
Weight is 7.6 POUNDS with hardware w/o counterweight.
Rear counterweight must be purchased separately to match the engine
Can be used on all 74-82 engines originally equipped with a 215mm clutch, but you must buy a 225mm 83-92 clutch.
Lighter than other ALUMINUM flywheels at 7.6 pounds versus theirs at 8.5 pounds.
SKU: 104806-11 Manufacturer SKU: 104806-11 -
RACE BUMPSTEER KIT, LONG COUPLING NUT
Race Bumpsteer Kit, Long Coupling Nut
For our Bumpsteer Kit. Couples the steering rack end to the heim joint on our Bumpsteer Kit Stud.
Threaded M14x2.0 for the hiem joint, M12x1.25 for the tie rod and is 3″ longSKU: R-BSK-COUP-L -
RACE STEERING ANGLE, COUPLING NUT (F-F)
Race Steering Angle Coupling Nut (F-F)
For our Steering Angle Kit. Connects the rack steering arm to the heim joint on the stud.
Threaded M14x2.0 for the hiem joint, M12x1.25 for the tie rod and is 1-3/8″ longSKU: R-SAK-COUP-S -
-
RACE STEERING ANGLE, HEIM JOINT 14X2.0 MM
Race Steering Angle Heim Joint 14×2.0 mm
14mm Heim for our Steering Angle kit and our Bumpsteer kit. Goes over the stud and threads into the coupler. About 1/2″ of the threads need to be cut off before installation.
SKU: R-SAK-HEIM
