FLYWHEEL REPLACEMENT FRICTION SURFACE FOR MAZDATRIX ALUMINUM FLYWHEEL

FLYWHEEL REPLACEMENT FRICTION SURFACE FOR MAZDATRIX 225mm ALUMINUM FLYWHEEL

Flywheel Replacement Friction Plate for MAZDATRIX 225mm (9″)  Non Turbo flywheel.

This is a replacement friction plate for our 225mm ALUMINUM flywheel for the non-turbo diameter (11 3/4″) flywheel.

New bolts and nuts for installation are included.

Note: The bellhousing and starter determine the diameter of flywheel needed, With all the race / street car transmission combinations out there Turbo versus non-turbo can sometimes be not the best definition – better to measure your flywheel diameter.

SKU: HS9057
Manufacturer SKU: HS9057

FLYWHEEL REPLACEMENT FRICTION SURFACE FOR MAZDATRIX 225mm ALUMINUM FLYWHEEL

 

$144.00

Related Products:

  • 83-92 NON-TURBO Diameter MAZDATRIX ALUMINUM FLYWHEEL

    NON-TURBO Diameter MAZDATRIX ALUMINUM FLYWHEEL 83-92

    83-92 NON-TURBO Diameter MAZDATRIX ALUMINUM FLYWHEEL

    Mazdatrix designed aluminum flywheel. 
    With our flywheel the pressure plate bolts directly to the flywheel and uses the original style locating dowels, eliminating the need for separate spacers.
    Comes with all necessary hardware.

    Flywheel is 11 3/4″ Diameter which fits ALL Non-Turbo Transmissions from ~1974-1991. It uses a 225mm CLUTCH which is standard from ’83 – 1991.

    Weight is 7.6 POUNDS with hardware w/o counterweight.

    Rear counterweight must be purchased separately to match the engine

    Can be used on all 74-82 engines originally equipped with a 215mm clutch, but you must buy a 225mm 83-92 clutch.

    Lighter than other ALUMINUM  flywheels at 7.6 pounds versus theirs at 8.5 pounds.

    SKU: 104806-11
    Manufacturer SKU: 104806-11
    $408.00
    Add to cart
  • CLUTCH KIT STAGE 1, 83-92 NON TURBO

    CLUTCH KIT STAGE 1, 83-92 NON TURBO

    Clutch Kit Stage 1, 83-92 Non Turbo
    Street/Strip performance

    SKU: 10806
    Manufacturer SKU: 10806
    $232.35
    Add to cart
  • CLUTCH KIT STAGE 2, 83-92 NON-TURBO

    CLUTCH KIT STAGE 2, 83-92 NON-TURBO

    Clutch Kit Stage 2, 83-92 Non-Turbo
    Race performance

    Exedy Stage 2
    Race performance, Metal Puck Disc and Upgraded Pressure Plate
    Includes Disc, Pressure Plate, T/O Bearing, Pilot Bearing and seal, and Alignment Tool

    We open every Exedy Kit to make sure that the correct Pilot Bearing and seal are included, due to Exedy rarely includes the pilot seal and sometimes has the incorrect bearing.

    SKU: 10954
    Manufacturer SKU: 10954
    $520.00
    Add to cart

You May Also Like: