EXHAUST HEADER 13B, 74-78 NO FLANGE EX PICK UP
EXHAUST HEADER 13B, 74-78 NO FLANGE EXCEPT PICK UP - Image 2

EXHAUST HEADER 13B, 74-78 NO FLANGE EXCEPT PICK UP

Racing Beat 13B Exhaust Header, 74-78 No Flange. Will not work on the Pick Up

This rotary exhaust Header/Collector (less outlet flange) is ideal for RX-2, RX-3, RX-4, and COSMO (does not fit rotary pickup) custom exhaust installations. The flame-cut, .5-inch thick engine flange provides positive sealing and alignment. By integrating the collector with the header we reduce the effort and cost in completing the exhaust system. Engine-to-pipe gaskets are not included but are available separately. An Air Control and Check Valve Cover Plate is required when using this header with a stock intake system. 

If the stock resonator is eliminated during installation of this unit, we strongly recommend selecting a Power Pulse Presilencer and installing it in place of the resonator to maintain a pleasant noise level and character.

SKU: 16007

EXHAUST HEADER 13B, 74-78 NO FLANGE EXCEPT PICK UP

 

$389.30

Related Products:

  • COVER PLATE AIR CONTROL VALVE, 74-75

    COVER PLATE AIR CONTROL VALVE, 74-75

    74-75 Intake Manifold cover plate for removed Air Control Valve

    SKU: 16326
    $16.98
    Add to cart
  • MUFFLER UNIVERSAL, STAINLESS 2.5" RACING BEAT

    MUFFLER UNIVERSAL, STAINLESS 2.5″ RACING BEAT

    Racing Beat Universal Stainless Muffler 2.5″ ID

    SKU: 16025
    $181.91
    Add to cart
  • FLANGE MUFFLER, 71-80 ALL

    FLANGE MUFFLER, 71-80 ALL

    Muffler Flange (71-80)

    SKU: 16193
    $36.38
    Add to cart
  • EXHAUST PRE-SILENCER, 81-83

    EXHAUST PRE-SILENCER, 81-83

    Racing Beat Exhaust Pre-Silencer, 71-78, 81-83

    The Racing Beat Power Pulse Presilencer for the 1971-78 & 81-83 RX-7 is designed to be used with our wide selection of RX-7 Streetable Headers to complete a bolt-on configuration. These Power Pulse Presilencers are ideal for those individuals wanting to fabricate custom exhaust systems incorporating either long or short primary exhaust systems.

    The Power Pulse Presilencer improves the character of the exhaust noise, dramatically reducing the inherent, obnoxious metallic high frequency noise with virtually no power loss. Constructed with a high temperature, 2-inch I.D. perforated core of 304 stainless steel wrapped with high-temperature stainless steel wool, the Power Pulse Presilencer measures 20 inches in length with a 4-inch outside diameter. The mounting studs are 12mm both front and rear.

    SKU: 16400
    $291.06
    Add to cart

You May Also Like:

  • EXHAUST SYSTEM SINGLE, 79-80 12A

    EXHAUST SYSTEM SINGLE, 79-80 12A

    Racing Beat Single Exhaust System, 79-80 12A

    SKU: 16410
    $1,121.80
    Add to cart
  • EXHAUST SYSTEM SINGLE, 83 12A

    EXHAUST SYSTEM SINGLE, 83 12A

    Racing Beat Single Exhaust System, 83 12A

    SKU: 16415
    $1,121.80
    Add to cart
  • EXHAUST PRE-SILENCER WITH DOWN PIPE, 88 CONVERTIBLE MANUAL

    EXHAUST PRE-SILENCER WITH DOWN PIPE, 88 CONVERTIBLE MANUAL

    Racing Beat Exhaust Pre-Silencer with Down Pipe, 88 Convertible Manual Transmission Non-Turbo

    Down Pipe with Presilencer – 1988 RX-7 Convertible Non-Turbo (w/Manual Transmission) – The 1986-92 13B 6-port engines, in stock form with the factory fuel injection, produces similar power gains with either our Header/Presilencer combo or our RX-7 Down Pipe/Presilencer combination. If you have no intentions of installing RB’s Holley intake System (or any other aftermarket carb set-up), we recommend the use of the down pipe/Presilencer combo since it offers a slightly quieter exhaust note, is easier to install and less costly. If you are intending to upgrade the intake or fuel injection system, the Header/Presilencer combo offers the greatest performance potential.

    The 1988 RX-7 Convertible (w/ Manual Transmission) Down Pipe/Presilencer combination incorporates a 2.5-inch O.D. Down Pipe and our perforated stainless steel core and stainless steel wool-packed Presilencer to boost power approximately 13% – an 18 horsepower increase on a 1987 RX 7- and maintain a comfortable exhaust noise level during full power driving.

    The replacement pipe connects to the factory exhaust manifold, and the presilencer connects to the factory Y-pipe, replacing all catalytic converters and intermediate tubing. (The downpipe cannot be used as a “bolt-up” component to replace just the catalytic converters.)

    The Racing Beat presilencer is equipped with an exhaust back-pressure tube for correct operation of the 6-port actuators. Installation of this requires the removal of the air control and check valve and the air pump. This kit includes all necessary mounting hardware, air control & check valve cover plate, and gaskets (1 Back Pressure Pick-up and 3 Replacement Pipe-to-Presilencer gaskets).

    SKU: 16209
    $534.83
    Add to cart