EXHAUST HEADER 13B, 79-85 6-PORT DUAL OUTLET
EXHAUST HEADER 13B, 79-85 6-PORT DUAL OUTLET

EXHAUST HEADER 13B, 79-92 4&6-PORT DUAL OUTLET

Racing Beat 13B Exhaust Header, 79-92 4&6-PORT DUAL OUTLET

SKU: 16127
Manufacturer SKU: 16127

EXHAUST HEADER 13B, 79-85 6-PORT DUAL OUTLET

Racing Beat’s Road Racing Header for the 1984-92 RX-7 13B (6-Port) is the first step in building a serious racing exhaust system. The engine-to-pipe flange is laser cut from 1/5″ thick flat steel. Like all of the headers we manufacture, the Road Racing Header is constructed with 2″ OD mild steel tubing, .120″ inch wall thickness, and mandrel-bent tubing throughout.

Outlet flange gaskets, bolts, and nuts are included. If needed, an engine-to-header gasket is available separately. An Air Control and Check Valve Cover Plate is required when using this header with a stock intake system. The Road Race Header can also be used as the basis for a custom streetable exhaust system in any car from 1971-92 (equipped with a 6-port engine), which allows simple swapping between street and race exhaust systems.

This header can used with the Street Port Center-Section Pipe 1979-85 12A & 13B except GSL-SE or 1984-85 GSL-SE.

$375.95

Related Products:

  • EXHAUST SYSTEM DUAL, 84-85 13B 6-PORT

    EXHAUST SYSTEM DUAL, 84-85 13B 6-PORT

    EXHAUST SYSTEM DUAL, 84-85 13B 6-PORT

    Dual Exhaust System 13B 6 PORT (using injection, has 6-port actuation and O2 sensor), 84-85
    Comes with all hardware and an ACV block off plate.

    SKU: 16-MZTX-4230
    $1,509.00
    Add to cart
  • EXHAUST SYSTEM SINGLE, 84-85 13B SE

    EXHAUST SYSTEM SINGLE, 84-85 13B SE

    Racing Beat Single Exhuast System, 84-85 13B SE

    Racing Beat offers a complete RX-7 high-performance exhaust system for the 1984-85 13B (GSL-SE) RX-7. This system includes our Road Race Header, a Power-Pulse Presilencer, and our legendary Power Pulse main muffler. The Power Pulse Presilencer unit is equipped with an exhaust backpressure pickup tube that allows the correct operation of the 6-Port intake actuators. Be careful, if you are considering a replacement exhaust system that does not have this important feature, your intake system will not perform correctly and a noticeable decrease in high RPM performance will occur.

    These components attach to all stock mounting points, and include all necessary gaskets and hardware. The only component not included is the factory connecting pipe that mounts just ahead of the main muffler. There is no horsepower to be gained by replacing this pipe with a larger diameter assembly. If your factory connecting pipe needs replacing, we suggest you contact your local muffler shop.

    These exhaust systems offer excellent horsepower gains when you require a muffled exhaust system for your stock-ported engine. The actual horsepower increase depends on which year/model stock RX-7 exhaust system you are comparing to, but a 22% increase at 7000 rpm is typical. Thanks to the combined efforts of the Power-Pulse Presilencer and the Power Pulse Main muffler, the exhaust noise is only slightly higher than stock, with a very low, pleasant character.

    .

    SKU: 16421
    $1,121.80
    Add to cart
  • COVER PLATE AIR CONTROL VALVE, 81-92 (NON-TURBO)

    COVER PLATE AIR CONTROL VALVE, 81-92 (NON-TURBO)

    81-92 Non Turbo Intake Manifold cover plate for removed Air Control Valve

    SKU: 16325
    $14.00
    Add to cart
  • EXHAUST HEADER GASKET, OUTLET DUAL PIPE

    EXHAUST HEADER GASKET, OUTLET DUAL PIPE

    EXHAUST HEADER GASKET, OUTLET DUAL PIPE

    Gasket for 16197 Flange, Dual Outlet Pipe

    SKU: 16300
    $20.29
    Add to cart
  • EXHAUST CENTER SECTION, 84-85 13B WITH 6 PORT TUBE

    EXHAUST CENTER SECTION, 84-85 13B WITH 6 PORT TUBE

    Racing Beat Exhaust Center Section, 84-85 13B With 6 Port Tube

    SKU: 16399
    $605.17
    Add to cart

You May Also Like:

  • EXHAUST SYSTEM DUAL, 13B DUAL PIPE 79-85

    EXHAUST SYSTEM DUAL, 13B DUAL PIPE 79-85

    Racing Beat 13B 4 Port Dual Pipe Exhaust System 79-85
    Will work on 6 Port if not using the actuators. 

    SKU: 16423
    $1,449.24
    Add to cart
  • EXHAUST HEADER 12A, 79-80 RX7

    EXHAUST HEADER 12A, 79-80 RX7

    Racing Beat 12A Exhaust Header, 79-80 RX7

    SKU: 16008
    $389.30
    Add to cart
  • FLANGE CONVERTER, PRE-SILENCER 81-85

    FLANGE CONVERTER, PRE-SILENCER 81-85

    Flange Converter and Presilencer 81-85 RX7

    SKU: 16190
    $36.75
    Add to cart
  • Exhaust Down Pipe 86-92 Non-Turbo Coupes 2 1/2"

    Exhaust Down Pipe 86-92 Non-Turbo Coupes 2 1/2″

    Exhaust Down Pipe 86-92 Non-Turbo Coupes 2 1/2″

    This Down Pipe is available for custom applications in a 1986-91 RX-7 (excluding convertible) non-turbo application. This 2.5-inch down pipe fits either manual or automatic transmission equipped cars and eliminates the catalytic converter sections.

    This down pipe bolts to the stock exhaust manifold, but the use of our presilencer (or a suitable replacement) is required to connect this assembly to the Y-pipe section. If you need to retain a catalytic converter in your exhaust system, you may find a suitable unit offered in the aftermarket. Although the replacement of your stock catalytic converters with a single aftermarket unit is technically NOT legal, this approach may suit your emissions needs. We suggest you contact your local emissions testing facility for more information. Gaskets sold separately.

    SKU: S16206
    $212.52
    Add to cart