EXHAUST CENTER SECTION, 84-85 13B WITH 6 PORT TUBE
EXHAUST CENTER SECTION, 84-85 13B WITH 6 PORT TUBE

EXHAUST CENTER SECTION, 84-85 13B WITH 6 PORT TUBE

Racing Beat Exhaust Center Section, 84-85 13B With 6 Port Tube

SKU: 16399

EXHAUST CENTER SECTION, 84-85 13B WITH 6 PORT TUBE

Works on 84-85 13B with 6 Port functional and no O2 Sensor. If you need to add an O2 sensor you can weld an O2 Sensor Bung into the forward section of the pipe or into the header you are using.

Fits the Racing Beat DUAL exhaust system for 84-85 13B

$605.17

Related Products:

  • EXHAUST O2 SENSOR WELD ON BUNG

    EXHAUST O2 SENSOR WELD ON BUNG

    Exhaust O2 Sensor Weld On Bung
    Browse our Haltech Section

    SKU: HT-010702
    $18.70
    Read more
  • EXHAUST SYSTEM DUAL, 84-85 13B 6 PORT

    EXHAUST SYSTEM DUAL, 84-85 13B 6 PORT

    Racing Beat Dual Exhaust System, 84-85 13B 6 Port (using a carburetor)

    Our Racing Beat-designed, “Long Primary” Street Port Complete RX-7 Exhaust System is designed for any 1979-85 RX-7 with a 13B street-ported engine. Designed specifically to optimize the performance benefit of a ported rotary engine, this RX-7 exhaust system will provide the maximum power output possible from an aftermarket RX-7 exhaust system. While louder than the stock system, the dual resonated center section offers maximum exhaust gas flow and scavenging while reducing sound output to a modest level.

    Offered as a packaged set, this kit consists of a Road Race Header, the Street Port Center Section (for a 13B 6-Port engine), and a high flow Power Pulse Main muffler.

    The Long Primary system typically adds 5% or more horsepower over a standard Short Primary system on a street ported engine, especially at higher RPMs. This system can also be used on non-ported engines with good results. It is strictly bolt-on, with no welding required. These complete “bolt-on” systems come complete with all required mounting hardware and gaskets. The center section for this application includes an exhaust backpressure pickup for to allow the correct operation of the 6-Port intake actuators. Since this is intended for racing applications, there is no provision for an oxygen sensor on this system.

    SKU: 16424
    $1,449.24
    Add to cart
  • MUFFLER POWER PULSE, 83-85 ALL RACING BEAT

    MUFFLER POWER PULSE, 83-85 ALL RACING BEAT

    Racing Beat Power Pulse Muffler, 83-85 All

    1983-85 RX-7 Power Pulse Muffler – Racing Beat has been manufacturing replacement muffler canisters for rotary powered vehicles for over 40 years. Ordinary replacement mufflers don’t stand a chance against the extreme temperatures and pounding exhaust gas pulsation generated by the rotary engine. Many of these replacement RX-7 mufflers will quickly burn up the packing material and self-destruct under these harsh conditions. Many years ago Racing Beat discovered an exhaust system supplier deep in the heart of the Italian countryside that was willing to produce Their RX-7 mufflers for them. That was over 30 years ago and they have never looked back! In fact, we can’t ever recall having a complaint with one of their mufflers, they just flat out work. Solid, strong and quiet, they hold up extremely well against the abuse of the harsh rotary exhaust.

    The Power Pulse RX-7 Mufflers interchange exactly with the stock RX-7 muffler on the 1983-85 chassis years. The main body of the muffler measures 8 inches in diameter and 18 inches in length. The heavy-duty construction, both internally and externally, ensures a long life. In a typical application, this muffler adds up to 5 HP over the Mazda factory muffler and is as quiet as a stock muffler with an improved note – deep and throaty, with no annoying metallic character. Emissions legal, this muffler bolts to the outlet of the connecting pipe section. Gaskets are not included, but are available separately if needed.

    Now may be the time to consider replacing the old rubber muffler hangers on your RX-7. New replacement hangers will ensure correct alignment of the RX-7 muffler canister and tip position in the bumper opening.

    SKU: 16432
    $448.72
    Add to cart

You May Also Like:

  • EXHAUST PRE-SILENCER, 79-80 4-PORT

    EXHAUST PRE-SILENCER, 79-80 4-PORT

    Racing Beat Exhaust Pre-Silencer, 79-80 4-Port

    SKU: 16404
    $248.62
    Add to cart
  • EXHAUST HEADER 13B, 79-85 6-PORT DUAL OUTLET

    EXHAUST HEADER 13B, 79-92 4&6-PORT DUAL OUTLET

    Racing Beat 13B Exhaust Header, 79-92 4&6-PORT DUAL OUTLET

    SKU: 16127
    Manufacturer SKU: 16127
    $375.95
    Add to cart
  • MUFFLER UNIVERSAL, POWER PULSE 79-85 RACING BEAT

    MUFFLER UNIVERSAL, POWER PULSE 79-85 RACING BEAT

    Racing Beat Universal Power Pulse Muffler, 79-85 

    In response to numerous requests from customers demanding a very low restriction“street capable” muffler, Racing Beat now offers the Universal Power Pulse PR-Extreme RX-7 Muffler with a 2.75″ OD internal perforated core design to meet the performance demands of high-horsepower ported rotary engines.  The Power Pulse PR-Extreme RX-7 Muffler is compatible with all 1979-85 RX-7 muffler rear mounting positions and retains the factory stock appearance; this PR-Extreme RX-7 Muffler includes an inlet of 3″.

    The Racing Beat Universal Power Pulse PR-Extreme RX-7 Muffler is manufactured by the same exhaust components manufacturer that has produced the “tried and  proven” First Generation RX-7 Power Pulse mufflers (1979-80, 1981-82, and 1984-85) since the mid-1980s.  Utilizing a heavy-walled canister shell and extremely durable heat and noise insulating materials, the Racing Beat Power Pulse PR-Extreme RX-7 Muffler is engineered for the high exhaust gas temperatures found in rotary engine applications. 

    The main body of the muffler canister measures 8 inches in diameter and 18 inches in length. The dual outlet tips are completely chrome-plated with straight-cut outlet.

    Now may be the time to consider replacing the old rubber muffler hangers on your RX-7. New replacement hangers will ensure correct alignment of the RX-7 muffler canister and tip position in the bumper opening.

    SKU: 16436
    $430.53
    Add to cart
  • Exhaust Down Pipe 86-92 Non-Turbo Coupes 2 1/2"

    Exhaust Down Pipe 86-92 Non-Turbo Coupes 2 1/2″

    Exhaust Down Pipe 86-92 Non-Turbo Coupes 2 1/2″

    This Down Pipe is available for custom applications in a 1986-91 RX-7 (excluding convertible) non-turbo application. This 2.5-inch down pipe fits either manual or automatic transmission equipped cars and eliminates the catalytic converter sections.

    This down pipe bolts to the stock exhaust manifold, but the use of our presilencer (or a suitable replacement) is required to connect this assembly to the Y-pipe section. If you need to retain a catalytic converter in your exhaust system, you may find a suitable unit offered in the aftermarket. Although the replacement of your stock catalytic converters with a single aftermarket unit is technically NOT legal, this approach may suit your emissions needs. We suggest you contact your local emissions testing facility for more information. Gaskets sold separately.

    SKU: S16206
    $212.52
    Add to cart