1993
Services
Virtually ALL the SERVICES listed here assume you are either buying NEW parts from us to have the service done on them, or you are sending YOUR parts to us for the service. PLEASE be aware the cost listed is for THE SERVICE ONLY! The price does NOT include any shipping of parts to us or return shipping to you. Return shipping will be added to your invoice and we will contact you for payment. Please be aware we must insure all return shipments for 100% of the REPLACEMENT COST of ALL parts AND service work performed, using the price of NEW parts. We STRONGLY recommend you do the same for ALL parts shipped to us. We have received MANY parts that were packaged poorly and damaged in shipment. It will be YOUR responsibility to file any / all claims with the carrier. UPS / Postal / FEDEX STORES pretty much will do a TERRIBLE job of packing so we encourage you to do it yourself.
-
-
-
SERVICE CUT 2MM APEX SEAL GROOVE RX8
SERVICE CUT 2MM APEX SEAL GROOVE RX8
Cut RX8 rotor apex seal grooves to RX7 2mm FULL DEPTH grooves.
Price is to do a PAIR of rotors. Price DOES NOT INCLUDE the rotors.
Turn around is approximately 3 weeks from when rotors are received AT Mazdatrix. Time does NOT include shipping back to you.
SKU: SV-CUT-2MM-RX8 -
SERVICE CUT 3MM APEX SEAL GROOVE RX7 or RX8
SERVICE CUT 3MM APEX SEAL GROOVE in 2MM RX7 or RX8 Rotors
Price is to do a PAIR of rotors. Price DOES NOT INCLUDE the rotors.
Either buy them new from us or ship your pair to us.
Turn around is approximately 3 weeks from when rotors are received AT Mazdatrix. Time does NOT include shipping back to you.
SKU: SV-CUT-3MM-RX7 -
SERVICE PRESS ONE BEARING WITH SCREW
SERVICE PRESS ONE BEARING WITH SCREW
Labor only for 93-11 Main bearings which all use a retaining screw.
Does not include a new/replacement screw.
SKU: SV-BRG-PRESS8S6 -
SERVICE ROTOR LIGHTENING (PAIR)
Service Rotor Lightening (Pair)
Removes approx. 4/10 pound (180 grams) from each rotor
Rotors must be cleaned before shipping to Mazdatrix. Customer is responsible for shipping.Assembly must be re-balanced after lightening.
SKU: SV-ROTOR-LIGHTENING Manufacturer SKU: SV-ROTOR-LIGHTENING -
Side Cut Two Rotors
Side cut two rotors for high RPM or high boost engines.
When a Rotary engine is spun to high RPM’s — say 8500+, or has a lot of boost, the rotors tend to “wobble” (for lack of a better term) and first the corner seal area hits the side housings- then more of the rotor and rotor gear will hit the side housings. Needless to say this is bad — trashes the rotors and damages the side housings.
For “race” motors we machine off anywhere from .005″ to .008″ per side to gain the extra clearance needed. Please tell us the RPM and / or boost you are going to be using.
Price does not include the rotors or return shipping to you.
We can do this to either new (which we prefer) or CLEANED used rotors — you have to clean them please.SKU: SV-ROTOR-SIDE -
WATER SEAL GROOVES CUT (1 SIDE)
Cut waterseal grooves. 86-95
Turn around is approximately 3 weeks from when housings are received AT Mazdatrix. Time does NOT include shipping back to you.
SKU: SV-WATERSEAL Manufacturer SKU: SV-WATERSEAL -
WPC TREATMENT CENTER HOUSING
WPC Treatment Center Housing
Treatment only. Part not included.SKU: WPC-HSNG-CENTER -
WPC TREATMENT E-SHAFT, FRICTION & DURABILITY
WPC Treatment Eccentric Shaft, Friction & Durability
Treatment only. Part not included.SKU: WPC-ESHAFT-DURA -
WPC TREATMENT E-SHAFT, FRICTION ONLY
WPC Treatment Eccentric Shaft, Friction Only
Treatment Only. Part not included.SKU: WPC-ESHAFT-FRIC -
WPC TREATMENT FRONT OR REAR SIDE HOUSING
WPC Treatment One Front or Rear Side Housing
SKU: WPC-SIDE-HOUSIN -
WPC TREATMENT FRONT STATIONARY GEAR
WPC Treatment Front Stationary Gear
Treatment Only. Part not included.SKU: WPC-GEAR-FRONT -
WPC TREATMENT OIL PUMP GEARS
WPC Treatment Oil Pump Gears
Treatment Only. Part not included.SKU: WPC-OIL-PUMP -
WPC TREATMENT ONE APEX SEAL
WPC Treatment, One Apex Seal
Treatment only. Part not included.Mazdatrix is pleased to announce our newest service available, WPC Treatment. While used on our race motors in the 2007 season with great success, we have decided to spread the success on to you! WPC is a proven treatment process that has been used for many years in Japan whereby ultra fine particles of various media are fired at high velocity towards the surface of a product. The thermal discharge that takes place upon impact permanently changes the surface of the metal by compaction and creates a harder, more durable final product. 
SKU: WPC-APEX-SEAL -
WPC TREATMENT ONE CORNER SEAL
WPC Treatment, 1 Corner Seal
Treatment only. Part not included.SKU: WPC-CORNER-SEAL -
WPC TREATMENT ONE CORNER SPRING
WPC Treatment, One Corner Seal Spring
Treatment only. Part not included.SKU: WPC-COR-SPRING -
WPC TREATMENT ONE MAIN BEARING
WPC Treatment One Main Bearing
Treatment Only. Part not included.SKU: WPC-MAIN-BEARIN -
-
WPC TREATMENT ONE ROTOR BEARING
WPC Treatment One Rotor Bearing
Treatment Only. Part not included.SKU: WPC-BEARING-RTR
