1986
Clutch and Flywheel
Steel and Aluminum Flywheels Click here for Important Flywheel and Clutch Explanation
-
FLYWHEEL FRICTION PLATE FOR Racing Beat NON-TURBO ALUMINUM FLYWHEELS
Racing Beat Flywheel Friction Plate For Our Non-Turbo Aluminum Flywheels
SKU: 11431 -
FLYWHEEL FRICTION PLATE FOR TURBO+RX8 ALUMINUM FLYWHEELS
Racing Beat Flywheel Friction Plate For Turbo + RX8 Aluminum Flywheels
The Racing Beat-manufactured Replacement Friction Plate is intended to replace the worn or damaged 240mm OD friction plate on all 1987-95 Turbo RX-7 and RX-8 Racing Beat Aluminum Flywheels. (#11435) (Compatible with Racing Beat flywheels only.) Simply unbolt the worn or damaged friction plate, and attach the new replacement with the hardware and instructions provided.
SKU: 11432 -
Flywheel Hardware 83-92 N/A Mazdatrix Aluminum
Flywheel Hardware 83-92 N/A Mazdatrix Aluminum
This kit is included in the 104806-11 flywheel.SKU: 95181 -
FLYWHEEL HARDWARE, ALUMINUM 83-92 NON TURBO
Aluminum Flywheel Hardware Kit, 83-92 Non Turbo (nuts and bolts)
Fits Racing Beat Flywheels onlySKU: 95368 -
FLYWHEEL HARDWARE, ALUMINUM 86-95 TURBO +RX8
Aluminum Flywheel Hardware Kit, 86-95 Turbo and RX8
Fits Racing Beat Flywheels onlySKU: 95193 -
FLYWHEEL HARDWARE, STEEL 74-92,TURBO, RACE
Steel Flywheel Hardware Kit, 74-92, Turbo, Race
Flywheel to Counterweight Bolt SetSKU: 95179 -
-
-
FLYWHEEL Mazdaspeed RACE 5.5″, FOR 5.5″ RACE CLUTCH NA–NLA–
Race Flywheel for 5.5″ Race Clutch. Fits all non-turbo diameter bell housings. (11.75 diameter and 116 tooth)
3.9 LBS
Accepts 5.5″ clutch ONLY
Our Hardware Kit #284063-HW-5.5 will NOT work on this flywheel. Customer must supply their own hardware for this flywheel.
When using this flywheel, you MUST modify your rear counterweight with additional holes and reduce hub diameter.Sorry, this item has been discontinued by Mazda
Click here for a templateSKU: 02-9207-0000 Manufacturer SKU: 0000-02-9207 -
FLYWHEEL RACE FOR 4.5″ CLUTCH “TURBO” DIAMETER + RX8
Race Flywheel for 4.5″ Clutch “Turbo” Diameter
Works on RX8Recommended Torque: 1/4″ bolt = 9-10 ft/lbs
SKU: 02-9207-45TB -
FLYWHEEL RACE FOR 4.5″ CLUTCH Non-Turbo
Race Flywheel For 4.5″ Clutch Non-Turbo
Recommended Torque: 1/4″ bolt = 9-10 ft/lbs
SKU: 02-9207-45NA -
FLYWHEEL RACE FOR 5.5″ CLUTCH NON TURBO DIAMETER
Race Flywheel For 5.5″ Clutch Non Turbo Diameter
Recommended Torque for 5/16″ bolts = 20 lb/ft
SKU: 02-9207-55NA -
FLYWHEEL RACE FOR 5.5″ CLUTCH TURBO + RX8
Race Flywheel For 5.5″ Clutch Turbo
Works with RX8Recommended Torque for 5/16″ bolts = 20 lb/ft
SKU: 02-9207-55TB -
FLYWHEEL RACE FOR 7.25″ CLUTCH NON TURBO DIAMETER
Race Flywheel For 7.25″ Clutch Non Turbo Diameter
SKU: 02-9207-725NT -
FLYWHEEL RACE FOR 7.25″ CLUTCH TURBO DIAMETER + RX8
Race Flywheel for 7.25″ Clutch Turbo Diameter
Works on RX8SKU: 02-9207-725TB -
-
FLYWHEEL RACE REPLACEMENT FRICTION PLATE 7.25″ N/A
Race Flywheel Replacement Friction Plate 7.25″ Non Turbo
This is a replacement friction plate for our 7.25″ race flywheel for the non-turbo diameter (11 3/4″).
New bolts and nuts for installation are included.
Note: The bellhousing and starter determine the diameter of flywheel needed, With all the race car transmission combinations out there Turbo versus non-turbo can sometimes be not the best definition – better to measure your flywheel diameter.
SKU: HS7450 -
FLYWHEEL RACE REPLACEMENT FRICTION PLATE 7.25″ TURBO
Race Flywheel Replacement Friction Plate 7.25″ Turbo
Works on RX8This is a replacement friction plate for our 7.25″ race flywheel for the Turbo diameter (12 1/2″).
New bolts and nuts for installation are included.
Note: The bellhousing and starter determine the diameter of flywheel needed, With all the race car transmission combinations out there Turbo versus non-turbo can sometimes be not the best definition – better to measure your flywheel diameter.
SKU: HS50603 -
FLYWHEEL REPLACEMENT FRICTION SURFACE FOR MAZDATRIX 225mm ALUMINUM FLYWHEEL
Flywheel Replacement Friction Plate for MAZDATRIX 225mm (9″) Non Turbo flywheel.
This is a replacement friction plate for our 225mm ALUMINUM flywheel for the non-turbo diameter (11 3/4″) flywheel.
New bolts and nuts for installation are included.
Note: The bellhousing and starter determine the diameter of flywheel needed, With all the race / street car transmission combinations out there Turbo versus non-turbo can sometimes be not the best definition – better to measure your flywheel diameter.
SKU: HS9057 Manufacturer SKU: HS9057
