1982
Transmission
-
DIFF PINION SEAL, 71-85 ALL
Differential Pinion Seal, 71-85 All
SKU: 27-0180-0223 Manufacturer SKU: 0223-27-018 -
DIFF SIDE CARRIER BEARING, 79-92 NON TURBO
Differential Side Carrier Bearing, 79-92 Non Turbo
SKU: 27-3500-0221 Manufacturer SKU: 0221-27-350 -
DIFF SLEEVE, PINION 73-85 + 86-92 Turbo
Differential Pinion Sleeve, 73-85 12a & 13b & 86-92 turbo RX7
SKU: 27-1710-0305 Manufacturer SKU: 0305-27-171 -
DRIVESHAFT BOLT, —NLA— 79-82
DRIVESHAFT BOLT, 79-82
Sorry, this item has been discontinued by Mazda.
SKU: 25-1230-1393 Manufacturer SKU: 1393-25-123 -
-
Driveshaft Flange for 79-82 RX7’s
Driveshaft Flange for 79-82 RX7’s
Rear Flange – the one that bolts to the differential flange for 79-82 manual or automatic transmissions.
(U-joint not included)SKU: 1502-29 -
DRIVESHAFT for 79-82 RX7
Aftermarket Driveshaft for 79-82 RX7
This is an aftermarket driveshaft made for us that fits all the 79-82 RX7’s — manual trans and automatics.
Uses the factory size of U-joint rear and the 2651-60 (Dodge 7260) front U-Joint. Complete, ready to bolt in.
SKU: 2691-700 -
DRIVESHAFT OEM, 79-82—NLA—
DRIVESHAFT OEM, 79-82
Sorry, this item has been discontinued by Mazda.
We have an aftermarket one that works fine.SKU: 25-1000-8871 Manufacturer SKU: 8871-25-100 -
Driveshaft Yoke for 79-82 RX7’s —NLA—
Driveshaft Yoke for 79-82 RX7’s Sorry, this item has been discontinued
SKU: 1503-22 -
DRIVESHAFT YOKE, Non-Turbo Manual Trans RX7
DRIVESHAFT YOKE, Non-Turbo Manual Trans RX7
Fits 83-92 Non-Turbo RX7 Transmissions. Fits our shafts 2691-701, 2691-704, 2691-704A
Uses a 7260 Dodge u-Joint which we sell as part number 2651-60
Does not work with the factory driveshaft
SKU: 2603-22 -
DRIVESHAFT, 83-85 RX7 WITH TURBO TRANS SWAP
Aftermarket Driveshaft, 83-85 CAR with Turbo Transmission Swapped in, still using the stock differential
This will also work in 79-82 cars, but you will have to source a 83-85 differential flange which is discontinued new, or use an 83-85 rear end. Typically, you would swap in an 84-85 rear in a performance application because the axles are bigger and stronger than the 79-83.
SKU: 2691-2535 -
DRIVESHAFT, ALUMINUM 83-85 RX7 WITH TURBO TRANS SWAP
Aftermarket Aluminum Driveshaft, 83-85 CAR with Turbo Transmission Swapped in, still using the stock differential
This will also work in 79-82 cars, but you will have to source a 83-85 differential flange which is discontinued new, or use an 83-85 rear end. Typically, you would swap in an 84-85 rear in a performance application because the axles are bigger and stronger than the 79-83.
SKU: 3191-2535A -
SEAL TRANSMISSION FRONT INPUT, 79-92 MANUAL ALL INCLUDING TURBO
Front Input Transmission Seal, 79-92 All Manual Transmission Including Turbo
SKU: 16-1030-0603 Manufacturer SKU: 0603-16-103 -
SEAL TRANSMISSION REAR, 71-85 ALL AUTOMATIC + MANUAL TRANS
Rear Transmission Seal, 71-85 All with Automatic and Manual Transmission
SKU: 17-335A-0437 Manufacturer SKU: 0437-17-335A -
SHIFTER NUT, ALL—NLA—
SHIFTER NUT, ALL
Sorry, this item has been discontinued by Mazda.
SKU: 17-524A-M503 Manufacturer SKU: M503-17-524A -
SHIFTER RING LOWER, 81-83 FOR SHORT SHIFTER
Lower Shifter Ring, 81-83
For short shifterThis is the lower ring for OUR short shifters for 81-83’s in case you needed it by itself.
Please – this ONLY works on “original” style shift tower extensions that ONLY came in 81-83 RX7 transmissions. These do NOT use the “normal” lower nylon bushing because that “bushing” is PART OF THE TRANSMISSION. When you look down where the lever goes the aluminum is rounded where the lever ball will sit into it.
With all the swapping of transmissions over the years you really might not know if you have an 84+ in your 81-83, or an 81-83 in your 84+.SKU: SHRING-81LOWER -
SHIFTER RING UPPER, 81-92 FOR SHORT SHIFTER
Upper Shifter Ring, 81-92
For short shifterThis is the upper ring for OUR short shifters for 81-92’s in case you needed it by itself.
SKU: SHRING-81UPPER -
-
SPACER REAR AXLE BEARING, 79-83
Rear Axle Bearing Spacer, 79-83
SKU: 26-1550-0259 Manufacturer SKU: 0259-26-155 -
TRANSMISSION – CLOSE RATIO, MIATA CONVERSION
Miata Transmission Conversion – Close Ratio
Must send in a donor TransmissionWhat we need for a donor Transmission
SKU: TRANS-MIATA-CON