WEBER EMULSION TUBE F7
WEBER EMULSION TUBE

WEBER EMULSION TUBE F7

Weber Emulsion Tube F7

Click Here for a Weber 48IDA Suggested Parts List

Browse our Weber Carbs, Manifolds and Parts section

SKU: 61450.091

WEBER EMULSION TUBE F7 – These are the tubes supplied in new 48IDA carbs. We have found them to work reasonably well.
(2) Needed per carb.

We also like to use the F11 and F8 Tubes. Changing tubes can really change the fuel curve.

Weber tubes are kind of a “black art + luck + voodoo” — by far best to test on a dyno with a wide band O2 to see fuel curve. Remember Rotary engines like to be pretty far into the rich “zone”. A page from a Weber manual showing the number of holes, size, and location is attached.

Choose your fuel jet here

Choose your air jet here

$26.83

Related Products:

You May Also Like:

  • AIR FILTER FOAM, 79-85 CARBURETED

    AIR FILTER FOAM, 79-85 CARBURETED

    Foam Air Filter for Carbs 79-85

    The Racing Beat-designed Foam Air Filter Element for all 1971-85 Rotaries (except 1984-85 GSL-SE) consists of a polyurethane foam over a metal screen form that interchanges exactly with the stock element. The foam element can be re-used by periodically cleaning in solvent and re-oiling. While the element offers no significant increase in air flow when compared to a clean, stock paper element, as the paper element collects dirt its air flow capacity decreases dramatically while the foam element is nearly unaffected.

    SKU: 16510
    $30.32
    Add to cart
  • WEBER MANIFOLD for PERIPHERAL PORT 13B 48 or 51IDA RB PERIPHERAL PORT HOUSING

    WEBER MANIFOLD for PERIPHERAL PORT 13B 48 or 51IDA RACING BEAT PERIPHERAL PORT HOUSING

    Weber Manifold for Peripheral Port 13B 48 or 51IDA
    This manifold is designed to fit the Racing Beat Periperal Port 13B Rotor Housings.

    Works with IDA carbs from 48mm to 52mm bore.

    The Racing Beat-designed and manufactured Peripheral Port Intake Manifold mates a Weber 48 IDA or 51 IDA downdraft carburetor, or equivalent throttle body, to the Racing Beat-manufactured 13B peripheral port housings. (This manifold cannot be used on the Mazda Factory Race MFR housings.) The steel tubing manifold is attached to the rotor housings with hoses that are included. A simple support bracket fabricated for your particular application, typically attached from the carburetor-manifold junction to the threaded bosses on top of the rotor housings, will complete the task.

    Browse our Weber Carbs, Manifolds and Parts section

    SKU: 16490
    $363.83
    Add to cart