Weber Carbs, Manifolds, and Parts
-
AIR FILTER K&N, OVAL SHORT (IDA)
K&N Air Filter, Oval Short (IDA)
Browse our Weber Carbs, Manifolds and Parts section
SKU: 16624 -
AIR FILTER K&N, OVAL TALL (IDA)
K&N Air Filter, Oval Tall (IDA)
Browse our Weber Carbs, Manifolds and Parts section
SKU: E3480 -
BOOK WEBER HAYNES, WEBER MANUAL
Book, HAYNES, Weber Manual
Browse our Weber Carbs, Manifolds and Parts section
SKU: 10240 -
CABLE THROTTLE, 81-85 12A
Throttle Cable, 81-85 12A
Click Here for a Weber 48IDA Suggested Parts List
SKU: 41-6600-FA01 Manufacturer SKU: FA01-41-660 -
FILTER AIR CANISTER, 48 IDA WITH K&N SHORT
Air Canister Filter for 48 IDA With K&N Short Filter
Click Here for a Weber 48IDA Suggested Parts List
Browse our Weber Carbs, Manifolds and Parts section
SKU: 56-1210 -
HEATSHIELD, 74-95 ALL 12A & 13B
Heatshield, 74-95 All 12A & 13B
Click Here for a Weber 48IDA Suggested Parts List
Browse our Weber Carbs, Manifolds and Parts section
SKU: 16219 -
INTAKE MANIFOLD STUD, MANIFOLD TO ENGINE, ALL IDA MANIFOLDS
Intake Manifold Stud, Manifold to Engine. All IDA Manifolds
30mmSee our Weber Suggested parts list.
SKU: 250-8-30 Manufacturer SKU: 250-8-30 -
THERMOSTAT GASKET, ALL 70-88 + Weber DCOE BASE
Thermostat Gasket, All up to 88, +Weber DCOE Base Gasket
Browse our Weber Carbs, Manifolds and Parts section
Browse our Water Cooling System parts section.
SKU: 15-173A-1757 Manufacturer SKU: 1757-15-173A -
WEBER 12A 45 DCOE, INTAKE KIT —-NLA—
This item has been discontinued
Weber 12A 45 DCOE, Intake Kit
Browse our Weber Carbs, Manifolds and Parts section
SKU: C-WEBER-12A -
WEBER 45 DCOE, CARBURETOR ONLY- NOT MODIFIED
Weber 45 DCOE, Carburetor Only – Not Modified
Browse our Weber Carbs, Manifolds and Parts section
SKU: 19600.060 -
WEBER 48 IDA, CARBURETOR ONLY
Weber 48IDA Carburetor
Be sure to look at our Weber Parts Category for many miscellaneous needed parts.
Weber Parts
Click Here for a Weber 48IDA Suggested Parts List
SKU: C-WEBER-48IDA -
WEBER 48/51 IDA DOWNDRAFT CARB THROTTLE CABLE STAY – STAINLESS STEEL
These Throttle Cable Brackets are made for Weber 48/51 IDA downdraft carburetors
Click Here for a Weber 48IDA Suggested Parts List
SKU: 444.00SS Manufacturer SKU: 444.00SS -
WEBER ACCELERATOR PUMP BYPASS, NO HOLE “0”
Weber Accelerator Pump Bypass, No Hole “0”
Browse our Weber Carbs, Manifolds and Parts section
SKU: 79701.000 -
WEBER AFTERMARKET 51IDA CARBURETOR
Weber Aftermarket 51 IDA Carburetor
Supplied with:
48 chokes, f7 tubes, 120 airs, 135 fuel, 0 bypass, 3.0 float needleClick Here for a Weber IDA Suggested Parts List
Be sure to look at our Weber Parts Category for many miscellaneous needed parts.
Weber PartsSKU: 16603 -
WEBER AIR HORN LOCK TAB
Weber Air Horn Lock Tab
Browse our Weber Carbs, Manifolds and Parts section
SKU: 52150.015 -
Weber Air Jet – Choose-A-Size
Weber Air Jet
All of the sizes we carry are listed here.Click Here for a Weber 48IDA Suggested Parts List
Browse our Weber Carbs, Manifolds and Parts section
SKU: 77401 Weber Air Jet -
WEBER BASE GASKET SET DCOE, SOFTMOUNT (PAIR)
Weber DCOE Base Gasket Set, Softmount (Pair)
Browse our Weber Carbs, Manifolds and Parts sectionSKU: 99005.145 -
Weber DCOE Accelerator Pump Jet – Choose-a-Size
Weber DCOE Accelerator Pump Jet
All of the sizes we carry are listed hereBrowse our Weber Carbs, Manifolds and Parts section
SKU: 76801 -
Weber DCOE Chokes
Weber DCOE Chokes
Select your choke sizeBrowse our Weber Carbs, Manifolds and Parts section
SKU: 72116 DCOE Chokes -
Weber DCOE Idle Fuel Jet – Choose-A-Size
Weber DCOE Idle Fuel Jet
All of the sizes we carry are listed here.Browse our Weber Carbs, Manifolds and Parts section
SKU: 74822 Weber Idle Gas Jet -
WEBER EMULSION TUBE F11
Weber Emulsion Tube F11
Click Here for a Weber 48IDA Suggested Parts List
Browse our Weber Carbs, Manifolds and Parts section
SKU: 61450.031 -
WEBER EMULSION TUBE F4
Weber Emulsion Tube F4
Click Here for a Weber 48IDA Suggested Parts List
Browse our Weber Carbs, Manifolds and Parts section
SKU: 61450.051 -
WEBER EMULSION TUBE F7
Weber Emulsion Tube F7
Click Here for a Weber 48IDA Suggested Parts List
Browse our Weber Carbs, Manifolds and Parts section
SKU: 61450.091 -
WEBER EMULSION TUBE F8
Weber Emulsion Tube F8
Click Here for a Weber 48IDA Suggested Parts List
Browse our Weber Carbs, Manifolds and Parts section
SKU: 61450.092 -
WEBER FLOAT NEEDLE and SEAT DCOE, 3.0 MM
Weber Float Needle and Seat DCOE, 3.0 mm
Browse our Weber Carbs, Manifolds and Parts section
SKU: 79503.300 -
WEBER FLOAT NEEDLE IDA, 3.0 MM
Weber IDA Float Needle, 3.0 mm
Rotary engines using IDA carbs need the largest float needle you can find. This 3.0 is the largest currently avialable.Click Here for a Weber 48IDA Suggested Parts List
Browse our Weber Carbs, Manifolds and Parts section
SKU: 79504.300 -
Weber Gasket – DCOE Air Filter
Weber DCOE Air Filter Gasket
Browse our Weber Carbs, Manifolds and Parts section
SKU: 99005.030 -
WEBER GASKET BASE, 48+51 IDA
Weber IDA Base Gasket, 48+51 IDA
(2) Needed per carbClick Here for a Weber 48IDA Suggested Parts List
Browse our Weber Carbs, Manifolds and Parts section
SKU: 99005.035 -
WEBER GASKET SET #1, 48+51 IDA “SMALL”
Weber Gasket Set #1, 48+51 IDA “Small”
Browse our Weber Carbs, Manifolds and Parts section
SKU: 92.0034.05 -
WEBER GASKET SET #2, 48+51 IDA
Weber Gasket Set #2, 48+51 IDA
Browse our Weber Carbs, Manifolds and Parts section
SKU: 92.1632.05 -
WEBER GASKET SET, ALL DCOE
Weber Gasket Set, All DCOE
Browse our Weber Carbs, Manifolds and Parts section
SKU: 92.0015.05 -
WEBER GASKET TOP COVER 48/51 IDA
Weber Top Cover Gasket 48/51 IDA
Browse our Weber Carbs, Manifolds and Parts section
SKU: 41705.021 -
WEBER GASKET, IDA AIR FILTER —NLA—
Weber IDA Air Filter Gasket has been discontinued by Weber
Browse our Weber Carbs, Manifolds and Parts section
SKU: 99005.049B -
WEBER IDA ACCLERATOR SHOOTER .060 PUSH-IN WITH O-RING
Weber IDA Accelerator Shooter .060 Push-In With O-Ring
Browse our Weber Carbs, Manifolds and Parts section
SKU: 76407.060 -
WEBER IDA BASE GASKET, 3MM THICK
Weber IDA Base Gasket, 3mm Thick
Browse our Weber Carbs, Manifolds and Parts section
SKU: 99005.123 -
Weber IDA Chokes
Weber IDA Chokes
72128.+SizeSelect your choke size
Click Here for a Weber 48IDA Suggested Parts List
Browse our Weber Carbs, Manifolds and Parts section
SKU: 72128 IDA Chokes -
Weber IDA Idle Fuel Jet – Choose-A-Size
Weber IDA Idle Fuel Jet
All of the sizes we carry are listed here.Browse our Weber Carbs, Manifolds and Parts section
SKU: 74823 -
WEBER IDA IDLE JET HOLDER 100
Weber IDA Idle Jet Holder 100
Browse our Weber Carbs, Manifolds and Parts section
SKU: 77903.100 -
WEBER IDA IDLE JET HOLDER 120
Weber IDA Idle Jet Holder 120
Browse our Weber Carbs, Manifolds and Parts section
SKU: 77903.120 -
WEBER IDA IDLE MIXTURE SCREW
Weber IDA Idle Mixture Screw
Browse our Weber Carbs, Manifolds and Parts section
SKU: 64750.007 -
WEBER IDA MANIFOLD for 13B 6-PORT 86-92
Racing Beat Weber IDA Manifold for 13B 6 Port 86-92
Click Here for a Weber 48IDA Suggested Parts List
Browse our Weber Carbs, Manifolds and Parts section
SKU: 16493 -
WEBER IDA MANIFOLD for 86-92 TURBO Engines
Racing Beat Weber IDA Manifold for 86-92 Turbo Engines
Click Here for a Weber 48IDA Suggested Parts List
Browse our Weber Carbs, Manifolds and Parts section
SKU: 16494 -
WEBER IDLE SPEED SCREW
Weber Idle Speed Screw
Spring is not included. It is 47600.007Browse our Weber Carbs, Manifolds and Parts section
SKU: 64625.012 -
WEBER INLET FITTING for 8mm (5/16″) push on hose
Weber 12mm Inlet Fitting for a regular 5/16″ rubber hose.
All Weber IDA carbs come with a useless banjo fitting we have never figured out how to use (unless you tap it 1/8-pipe and use a “barb” fitting). This will replace the stock inlet fitting with a hose nipple that you can push on and clamp regular fuel hose to. This is the stock fuel hose size for all Mazda RX cars.
Click Here for a Weber 48IDA Suggested Parts List
Browse our Weber Carbs, Manifolds and Parts section
SKU: 99301.380 Manufacturer SKU: 99301.380 -
WEBER INLET FITTING, AN -6 TO WEBER 12MM
-6 To Weber 12mm Inlet Fitting
All Weber IDA carbs come with a useless banjo fitting we have never figured out how to use (unless you tap it 1/8-pipe and use a “barb” fitting). This will replace the stock inlet fitting with -6AN so you can use braided hose.
The 12mm Stat-O-Seal is strongly recommended for this fitting — it is at: WEBER INLET SEAL, STAT-O-SEAL FOR 12MM
We also have a 90° fitting for 8mm / 5/16″ push on hose at: WEBER INLET FITTING for 8mm (5/16″) push on hoseClick Here for a Weber 48IDA Suggested Parts List
Browse our Weber Carbs, Manifolds and Parts section
SKU: 30606-M12D -
WEBER INLET SEAL, STAT-O-SEAL FOR 12MM
Weber Inlet Seal, Stat-O-Seal FOR 12mm
This is the seal needed for the -6AN fuel inlet fitting for Weber carbs.Click Here for a Weber 48IDA Suggested Parts List
Browse our Weber Carbs, Manifolds and Parts section
SKU: 357-12MM-STAT -
Weber Main Fuel Jet – Choose-A-Size
Weber Main Fuel Jet
All of the sizes we carry are listed here.Click Here for a Weber 48IDA Suggested Parts List
Browse our Weber Carbs, Manifolds and Parts section
SKU: 73401 Weber Main Jet -
WEBER MANIFOLD for 12A with a 48IDA
Weber Manifold for 12A with a 48IDA
DOES NOT come with the intake manifold gasketClick Here for a Weber 48IDA Suggested Parts List
Browse our Weber Carbs, Manifolds and Parts section
SKU: 16482 -
WEBER MANIFOLD for Early 13B 4-PORT 48 IDA
Weber Manifold Early 13B 4-Port 48 IDA
Does not come with Intake Manifold GasketClick Here for a Weber 48IDA Suggested Parts List
Browse our Weber Carbs, Manifolds and Parts section
SKU: 16484 -
WEBER MANIFOLD for PERIPHERAL PORT 13B 48 or 51IDA RACING BEAT PERIPHERAL PORT HOUSING
Weber Manifold for Peripheral Port 13B 48 or 51IDA
This manifold is designed to fit the Racing Beat Periperal Port 13B Rotor Housings.Works with IDA carbs from 48mm to 52mm bore.
Browse our Weber Carbs, Manifolds and Parts section
SKU: 16490 -
WEBER MANIFOLD IDA for 84-85 13B 6-PORTS
Racing Beat Weber IDA Manifold for 84-85 13B 6-Ports
Click Here for a Weber 48IDA Suggested Parts List
Browse our Weber Carbs, Manifolds and Parts section
SKU: 16492 -
WEBER MANIFOLD IDA for 93-95 13B Engines
Racing Beat Weber IDA Manifold for 93-95 13B Engines
48/51+ IDA 1993-95 13B 4-Port Engine or any 13B engine assembled using ’93-95 “Turbo” side housings. Also for any throttle body with an IDA bolt pattern.Click Here for a Weber 48IDA Suggested Parts List
Browse our Weber Carbs, Manifolds and Parts section
SKU: 16495 -
WEBER NUT 8X1.25 WITH 10MM HEX
Weber Nut 8X1.25 With 10mm Hex
These are needed for the larger bore carbs as there is not enough room to get a 12mm wrench correctly on the base nuts.
These use a 10mm wrench which gives you room to tighten the nut.
Hard to find in “not jet nut” style and in steel. They can come in handy in many other places also.Click Here for a Weber 48IDA Suggested Parts List
Browse our Weber Carbs, Manifolds and Parts section
SKU: 967-NUT -
WEBER PHENOLIC SPACER (EACH), 48 OR 51 IDA
Weber 48 or 51 IDA Phenolic Spacer
(Each)Browse our Weber Carbs, Manifolds and Parts section
SKU: 16621 -
WEBER RAM STACK, 48 IDA
Weber Ram Stack, 48 IDA
Browse our Weber Carbs, Manifolds and Parts section
SKU: 52840.027 -
WEBER RAM STACK, 51 IDA
Weber Ram Stack, 51 IDA
Sold individually – two needed per 51IDA carbBrowse our Weber Carbs, Manifolds and Parts section
SKU: 16608 -
WEBER SHAFT LEVER, 48+51IDA MAZDA CABLE
Weber Shaft Lever, 48+51 IDA Mazda Cable
For “U.S. Style” manifolds – where the cable pulls from BELOW shaft.Click Here for a Weber 48IDA Suggested Parts List
Browse our Weber Carbs, Manifolds and Parts section
SKU: 444614.04 -
WEBER SHAFT LEVER, IDA FOR REVERSE PULL
Weber Shaft Lever, IDA For Reverse Pull
For “Australian Style” manifolds where cable pulls from ABOVE shaft.Browse our Weber Carbs, Manifolds and Parts section
SKU: 444.675.05 -
WEBER SHAFT LEVER, WITH STOP PIN LEFT
Weber Shaft Lever, With Stop Pin Left. 14ga steel
We have these “stops” made for us so the throttle STOP is on the same side of the carb as the throttle PULL. Adjusted correctly this prevents the throttle shaft from being bent when full throttle is applied.Click Here for a Weber 48IDA Suggested Parts List
Browse our Weber Carbs, Manifolds and Parts section
SKU: MAT460-L -
WEBER SHAFT LEVER, WITH STOP PIN RIGHT
Weber Shaft Lever, With Stop Pin Right
This STOP is for when the carb fuel inlet is on the Engine side, cable pulling from ABOVE the shaft.
These are for what we call “Australian Style” manifolds.Browse our Weber Carbs, Manifolds and Parts section
SKU: MAT460-R -
WEBER SHAFT LOCK TAB
Weber Shaft Lock Tab Washer Fits IDA or DCOE Sold Each
Part can be referenced at #26
Browse our Weber Carbs, Manifolds and Parts section
SKU: 55520.004 Manufacturer SKU: 55520.004 -
WEBER SHAFT NUT
Weber Shaft Nut Fits IDA or DCOE Sold Each
Part can be referenced at #25
Browse our Weber Carbs, Manifolds and Parts section
SKU: 34710.003 -
WEBER SHAFT WASHER
Weber Shaft Washer Fits IDA or DCOE Sold Each
Reference part at #27
Browse our Weber Carbs, Manifolds and Parts section
SKU: 99024.258 -
WEBER SPRING for EITHER IDLE SPEED OR MIXTURE SCREW
Weber Spring for Either Idle Speed or Mixture Screw
Browse our Weber Carbs, Manifolds and Parts section
SKU: 47600.007 -
WEBER STUD, 8X1.25 35MM
Weber Stud, 8X1.25 35mm
Click Here for a Weber 48IDA Suggested Parts List
Browse our Weber Carbs, Manifolds and Parts section
SKU: AV11981 -
WEBER STUD, 8X1.25 45MM
Weber Stud, 8X1.25 45mm
Most of the Weber Manifolds do not include studs to hold the carb to the manifold. These 45mm ones work great when you are using spacers — measure to be sure these are what you need – depends on the spacer thickness.Browse our Weber Carbs, Manifolds and Parts section
SKU: AV11983 -
WEBER TUBE HOLDER IDA, LONG EXTENSION
IDA Long Emulsion Tube Holder
Browse our Weber Carbs, Manifolds and Parts section
SKU: 52580.006 -
WEBER-6 PORT 86-92 — NLA — 45MM, 13B KIT
This Kit has been discontinued
Weber 6 Port 86-92 45mm, 13B Kit
Browse our Weber Carbs, Manifolds and Parts section
SKU: C-WEBER-6P86-92
