Intake
-
12mm Sealing Washer -Pulsation Damper, Oil Banjo
12mm Sealing Washer – Pulsation Damper, Oil Banjo, etc…
SKU: 13-4830-N236 Manufacturer SKU: N236-13-483 -
14mm Copper Sealing Washer – 93-95 Oil Banjo etc
14mm Sealing Washer seal for many applications. These are copper, for aluminum see here
Oil Banjo Bolt Washer for 93-95 Turbo Oil Feed on top of front side housing and several other places
These are sold individually, banjo bolts will require two sealsSKU: 21-4000-9956 Manufacturer SKU: 9956-21-400 -
6-PORT ACTUATOR MOTOR RX8 04-08
04-08 RX8 6 Port Actuator Motor
SKU: 13-B700-N3H6 Manufacturer SKU: N3H6-13-B70 -
6-PORT ACTUATOR MOTOR RX8 09-11
09-11 RX8 6 Port Actuator Motor
SKU: 13-B70A-N3R4 Manufacturer SKU: N3R4-13-B70A -
6-PORT ACTUATOR SEAL 84-92 ROD TO MANIFOLD–NLA-
Sorry, this item has been discontinued by Mazda.
6-Port Actuator Seal Rod to Manifold 84-92
SKU: 13-188A-N225 Manufacturer SKU: N225-13-188A -
ADAPTER INTAKE MAN, 6-PORT FC TO RENESIS —NLA—
Sorry, this item has been discontinued.
Intake Adapter Manifold, 6-Port FC To Renesis Engine
SKU: 16480 -
AIR CONTROL VALVE 04-11 RX8
Air Control Valve 04-11 RX8
SKU: 13-990D-N3H1 Manufacturer SKU: N3H1-13-990D -
AIR CONTROL VALVE GASKET, 04-11 RX8
Air Control Valve Gasket, 04-11 RX8
SKU: 13-9960-N3H1 Manufacturer SKU: N3H1-13-996 -
AIR CONTROL VALVE GASKET, 79-80 INNER —NLA—
Mazda has discontinued this item.
Inner Air Control Valve Gasket, 79-80
SKU: 13-724B-8871 Manufacturer SKU: 8871-13-724B -
AIR CONTROL VALVE GASKET, 79-80 OUTER
Outer Air Control Valve Gasket, 79-80
SKU: 13-7490-8871 Manufacturer SKU: 8871-13-749 -
AIR CONTROL VALVE GASKET, 81-92 NON TURBO INNER
Air Control Valve Inner Gasket, 81-92 Non Turbo
SKU: 13-724A-N201 Manufacturer SKU: N201-13-724A -
AIR CONTROL VALVE GASKET, 86-92 TURBO
Air Control Valve Gasket, 86-92 Turbo
SKU: 13-9960-N386 Manufacturer SKU: N386-13-996 -
AIR CONTROL VALVE GASKET, 93-95
Air Control Valve Gasket, 93-95 All
SKU: 13-9960-N3A3 Manufacturer SKU: N3A3-13-996 -
AIR DUCT RX8, 04-08 RAM AIR REVI
Racing Beat Air Duct RX8, 04-08 Ram Air Revi
Racing Beat offers our Ram Air Duct for use with the Racing Beat REVi Intake Kit on all 2004-2008 RX-8s. The inlet of this duct is positioned in the mouth opening of the Mazda RX-8 to allow cooler ambient air to be force-fed directly into the REVi intake tract, converting your intake into a true “cold-air” intake system!
Designed by Racing Beat, this high-density polyethylene intake duct mounts under the nose of your RX-8 and directs air into the inlet of the REVi Intake Kit. This duct can also be used with the stock intake box or aftermarket intake kits to direct cooler air into the engine compartment.
SKU: 18298 -
AIR DUCT RX8, 09-11 RAM AIR REVI
Racing Beat Air Duct RX8, 09-11 Ram Air REVI
Racing Beat offers our Ram Air Duct for use with the Racing Beat REVi Intake Kit for use on the 2009-11 RX-8. The inlet of this duct is positioned in the mouth opening of the Mazda RX-8 to allow cooler ambient air to be force-fed directly into the REVi intake tract, converting your intake into a true “cold-air” intake system!
Designed by Racing Beat, this high-density polyethylene intake duct mounts under the nose of your RX-8 and directs air into the inlet of the REVi Intake Kit. This duct can also be used with the stock intake box or aftermarket intake kits to direct cooler air into the engine compartment.
The installation of this duct requires the removal of the nose from the RX-8 and can easily be undertaken by 1-2 people in about an hour. Fully detailed instructions, with numerous photos included, will guide you through the installation process. Although this process might sound rather challenging, the process is relatively straightforward and can be undertaken using only simple hand-tools.
SKU: 18297 -
AIR FILTER BOX TOP, 93-95 ORIGINAL TOP —NLA—
Sorry, this item has been discontinued by Mazda
Air Filter Box Top Original, 93-95
SKU: 13-Z010-N3A1 Manufacturer SKU: N3A1-13-Z01 -
AIR FILTER BOX, 93-95 COMPLETE —NLA—
Sorry, this item has been discontinued by Mazda
Air Filter Box, 93-95 Complete
SKU: 13-3200-N3A1 Manufacturer SKU: N3A1-13-320 -
AIR FILTER FOAM, 79-85 CARBURETED
Foam Air Filter for Carbs 79-85
The Racing Beat-designed Foam Air Filter Element for all 1971-85 Rotaries (except 1984-85 GSL-SE) consists of a polyurethane foam over a metal screen form that interchanges exactly with the stock element. The foam element can be re-used by periodically cleaning in solvent and re-oiling. While the element offers no significant increase in air flow when compared to a clean, stock paper element, as the paper element collects dirt its air flow capacity decreases dramatically while the foam element is nearly unaffected.
SKU: 16510 -
AIR FILTER HOUSING, RACING BEAT HOLLEY WITHOUT FILTER
Racing Beat Air Filter Housing Without Filter for Racing Beat Holley Carburetor
Racing Beat’s dyno-proven Power Pulse Air Filter Assembly, for the Holley Carburetor, is designed specifically for performance. While the assembly uses the same Racing Beat foam air filter element that fits the stock canister, the design of the Power Pulse canister both improves air flow into the carburetor and limits the introduction of dirt particles into the filter element. The spun aluminum canister pieces are powder-coated white for added durability.
The Power Pulse Air Filter Assembly fits most Holley 465, 550, 600, and 650 CFM carburetors (specifically, all Racing Beat Holley Intake System Kits). There is no provision for emission control valve hose/air pump hose connections on this assembly; however, there is a position available to connect a crankcase breather tube if needed.
SKU: 16530 -
AIR FILTER HOUSING, RACING BEAT STOCK WITHOUT FILTER
Racing Beat Air Filter Housing, Stock without Filter
Racing Beat’s dyno-proven Power Pulse Air Filter Assembly, for all 1971-85 Stock Carburetor Bodies, is designed specifically for performance. While the assembly uses the same Racing Beat foam air filter element that fits the stock canister, the design of the Power Pulse canister both improves air flow into the carburetor and limits the introduction of dirt particles into the filter element. The spun aluminum canister pieces are powder-coated white for added durability.
There is no provision for emission control valve hose/air pump hose connections on this assembly; however, there is a position available to connect a crankcase breather tube if needed.
SKU: 16531