HOSE VACUUM 6.0MM, STANDARD COLORS

Related Products:

• 

  HOSE VACUUM 8.0MM, STANDARD COLORS

  8.0mm Vacuum Hose. Sold by the foot
  Please choose color.

  SKU:	VACHOSE-8.0-STD

  $5.80
  Select options This product has multiple variants. The options may be chosen on the product page
• 

  HOSE VACUUM 10MM, STANDARD COLORS

  10mm Vacuum Hose, Sold by the foot
  Please choose color.

  SKU:	VACHOSE-10-STD

  $7.40
  Select options This product has multiple variants. The options may be chosen on the product page
• 

  HOSE VACUUM 6.0MM, STANDARD COLORS

  6.0mm Vacuum Hose, Sold by the Foot.
  Please Choose Color

  SKU:	VACHOSE-6.0-STD

  $4.20
  Select options This product has multiple variants. The options may be chosen on the product page
• 

  HOSE VACUUM 3.5MM, STANDARD COLORS

  3.5mm Vacuum Hose, Sold by the foot.
  Please choose color.

  SKU:	VACHOSE-3.5-STD

  $3.92
  Select options This product has multiple variants. The options may be chosen on the product page
• 

  HOSE OIL METERING, 72-85 CARB PER FOOT

  Oil Metering Hose, 72-85, Carb., PER FOOT
  

  We have found this hose to work well for the oil metering lines for early cars that do not use fittings on the line ends. This hose can be used stand-alone, it will push directly onto the nipples at the carb and the metering pump, OR it can be used to splice an OEM metering hose by pushing over the OEM plastic hose.
  At this time the 12A OEM short hose is only one available for carbs. We typically will use two short OEM lines and cut one and extend it  about two inches in the middle with this hose to make a long line.
  This hose also works well to splice/repair any OEM injector line for all 70-11 rotary.
  Sold by the foot.

   

  SKU:

  MOPHOSE-1

  $2.00
  Add to cart
• 

  HOSE OIL METERING, 84-11 F.I. PER FOOT

  Oil Metering Hose, 84-11, Fuel Injection, PER FOOT

  We have found this hose to work well for the 84 and later fuel injected cars. The OEM oil metering hoses have banjo fittings on each end. You need to carefully remove the OEM hose and clamp from each banjo fitting. This hose can then be routed and cut to whatever length you need. The ends can be held to the fittings with small zipties or safety wire.
  Sold per foot.

  SKU:

  MOPHOSE-2

  $2.00
  Add to cart