HOSE VACUUM 3.5MM, STANDARD COLORS

3.5mm Vacuum Hose, Sold by the foot.
Please choose color.

SKU: VACHOSE-3.5-STD

Amounts of Hose for complete hose changes on your car:

79-85               3.5mm     10ft
79-85               6.0mm       6ft

84-85GSLSE    3.5mm     20ft
84-85GSLSE    6.0mm       4ft

86-92               3.5mm     13ft
86-92               6.0mm       6ft

93-95               3.5mm      20ft
93-95               6.0mm       8ft

When ordering, 1 unit = 1 foot, i.e. 10 = 10 feet

$3.92

Reviews

There are no reviews yet.

Be the first to review “HOSE VACUUM 3.5MM, STANDARD COLORS”

Your email address will not be published. Required fields are marked *


Related Products:

  • HOSE VACUUM 3.5MM, STANDARD COLORS

    3.5mm Vacuum Hose, Sold by the foot.
    Please choose color.

    SKU: VACHOSE-3.5-STD
  • HOSE VACUUM 8.0MM, STANDARD COLORS

    8.0mm Vacuum Hose. Sold by the foot
    Please choose color.

    SKU: VACHOSE-8.0-STD
  • HOSE VACUUM 10MM, STANDARD COLORS

    10mm Vacuum Hose, Sold by the foot
    Please choose color.

    SKU: VACHOSE-10-STD
  • HOSE VACUUM 6.0MM, STANDARD COLORS

    6.0mm Vacuum Hose, Sold by the Foot.
    Please Choose Color

    SKU: VACHOSE-6.0-STD
  • HOSE OIL METERING, 84-11 F.I. PER FOOT

    HOSE OIL METERING, 84-11 F.I. PER FOOT

    Oil Metering Hose, 84-11, Fuel Injection, PER FOOT

    We have found this hose to work well for the 84 and later fuel injected cars. The OEM oil metering hoses have banjo fittings on each end. You need to carefully remove the OEM hose and clamp from each banjo fitting. This hose can then be routed and cut to whatever length you need. The ends can be held to the fittings with small zipties or safety wire.
    Sold per foot.

    SKU: MOPHOSE-2
    $2.00
    Add to cart
  • HOSE OIL METERING, 72-85 CARB PER FOOT

    HOSE OIL METERING, 72-85 CARB PER FOOT

    Oil Metering Hose, 72-85, Carb., PER FOOT

    We have found this hose to work well for the oil metering lines for early cars that do not use fittings on the line ends. This hose can be used stand-alone, it will push directly onto the nipples at the carb and the metering pump, OR it can be used to splice an OEM metering hose by pushing over the OEM plastic hose.
    At this time the 12A OEM short hose is only one available for carbs. We typically will use two short OEM lines and cut one and extend it  about two inches in the middle with this hose to make a long line.
    This hose also works well to splice/repair any OEM injector line for all 70-11 rotary.
    Sold by the foot.

     

    SKU: MOPHOSE-1
    $2.00
    Add to cart