WEBER IDA MANIFOLD for 86-92 TURBO Engines
Racing Beat Weber IDA Manifold for 86-92 Turbo Engines
Note: This manifold does NOT have any hole or fitting for the brake servo hose.
If you want to use the servo then drill and tap a 1/8 NPT (pipe thread) hole somewhere convenient in the rear manifold runner (PRIOR to installation).
Use a straight or 90 degree 5/16″ (8mm) fitting.
SKU: | 16494 |
WEBER IDA MANIFOLD for 86-92 TURBO Engines
48/51+ IDA 86-92 13B 4-Port Engine or any 13B engine assembled using 86-92 “Turbo” side housings. Also for any throttle body with an IDA bolt pattern.
Use the 12A throttle cable for the easiest installation.
Also see our WEBER PARTS category for linkage pieces, gaskets, studs, jets, etc.
$395.36
Related Products:
-
INTAKE MANIFOLD GASKET, 89-92 TURBO
Intake Manifold Gasket, 89-92 Turbo
SKU: 13-111A-N370 Manufacturer SKU: N370-13-111A -
WEBER 51 IDA CARBURETOR ONLY
******Click here for our 51 IDA********
Weber 51 IDA Carburetor Only
Racing Beat Modifications
Each carburetor is based on a standard Weber 48mm IDA and then extensively modified in-house by Racing Beat during the conversion process. Using tuning techniques discovered during Racing Beat’s early racing days, these same techniques and modifications are utilized in the methodical transformation of the carburetor as it enlarged to become the Racing Beat 51 IDA.At the start of each carburetor transformation each unit is completely disassembled and inspected. The carburetor bore is machined to the larger 51mm diameter, fitted with precision-made aluminum venturis, emulsion tubes, main and air jets, needle-and-valve, hand-crafted dual throttle plates and shaft, and enlarged diameter air horns with retaining ring.
As delivered, the Racing Beat Weber 51mm IDA carburetor is tuned specifically for a 13B Peripheral Port engine. The Racing Beat Weber 51 IDA carburetor is also suitable for use on a number of rotary engine applications, including a 13B bridge or J-bridge ported engine, or the 12A peripheral ported engine. If the 51 IDA carb is intended for use on these engines; we offer the appropriate Weber components to properly re-tune the carb for these applications. Follow this link for a listing of tuning recommendations for various rotary engine applications. (PDF)
Air Filtration
When considering air filtration for the Weber carburetor you have several options. Open air horns are not recommended due to possibility of engine damage if any debris are ingested by the carburetor. A simple, effective and attractive option are to install a pair of mess air screens. These offer reasonable protection from larger objects, but lack the serious filtration properties of an air filter. The K&N Air Filter Kit is an excellent and easy-to-install option, but the height of the air horns must be trimmed due to clearance concerns within the filter housing. For a dedicated racing application we suggest the fabrication of an enclosed cold-air box. We supply a simple drawing with the instructions highlighting our suggestion for a design, your final design will vary with your application.Performance Comparisons
The selection of an appropriate intake system requires that many factors be taken into consideration. Various intake systems yield different performance characteristics based upon specific engine, exhaust and driveline selections. Due to the complexities associated with these configurations, it is difficult to determine exact power gains for specific applications. Use this intake reference guide (PDF) for performance comparisons between the Weber and Holley Intake systems that we offer.Browse our Weber Carbs, Manifolds and Parts section
SKU: 16602 -
CABLE THROTTLE, 79-85 12A
Throttle Cable, 79-85 12A
This WAS discontinued by Mazda BUT we are having them made for us.
The replacement is made using a combo of another MAZDA cable and modifications to it.
Click Here for a Weber 48IDA Suggested Parts List
SKU: 41-6600-FA01 Manufacturer SKU: FA01-41-660 -
INTAKE MANIFOLD GASKET, 86-88 TURBO
Intake Manifold Gasket, 86-88 Turbo
SKU: 13-111D-N318 Manufacturer SKU: N318-13-111D -
BOOK WEBER HAYNES, WEBER MANUAL
Book, HAYNES, Weber Manual
Browse our Weber Carbs, Manifolds and Parts section
SKU: 10240 -
WEBER 48 IDA, CARBURETOR ONLY
WEBER 48 IDA, CARBURETOR ONLY
Weber 48IDA Carburetor
Be sure to look at our Weber Parts Category for many miscellaneous needed parts.
Weber Parts
Click Here for a Weber 48IDA Suggested Parts List
SKU: C-WEBER-48IDA