MANIFOLD HOLLEY, 74-78 13B
MANIFOLD HOLLEY, 74-78 13B
MANIFOLD HOLLEY, 74-78 13B

MANIFOLD HOLLEY, 74-78 13B

Holley Manifold, 74-78 13B Stock port (4-port)

The Racing Beat-designed intake manifold for the 1974-78 13B Stock Port engine is ideally suited to meet the performance requirements of the Holley carburetor. Designed by Chief Engineer/Engine Builder Jim Mederer, these cast aluminum intake manifolds have proven themselves in a variety of street and race applications.

All of Racing Beat’s manifolds for Holley carburetor applications are sand-cast by a local foundry and delivered to our in-house production shop for all machining and surface finishing processes. Select manifolds are then hand-ported to match a specific intake port configuration for an intended engine application. Further machining is then undertaken to match the base-plate surface to the Holley carburetor base. These critical machining steps ensure a positive fitment between both the engine surface and the carburetor base. Every manifold is then surface finished using a ball-burnishing process that enhances the final appearance of the aluminum material. Once these labor-intensive processes have been completed these manifolds look as good as they perform!

SKU: 16477

MANIFOLD HOLLEY, 74-78 13B

 

$406.28

Related Products:

  • MANIFOLD HOLLEY, 74-78 13B STREETPORT

    MANIFOLD HOLLEY, 74-78 13B STREETPORT

    Holley Manifold, 74-78 13B StreetPort (4-port)

    SKU: 16478
    $406.28
    Add to cart
  • HOLLEY 13B BRIDGE PORT, 13B 4PORT 74-78 BRIDGE

    HOLLEY 13B BRIDGE PORT, 13B 4PORT 74-78 BRIDGE

    Holley 13B Bridge Port, 13B 4PORT 74-78
    Bridgeport 13B (uses 650 cfm carb.)

     

    SKU: 18042
    $1,706.34
    Add to cart
  • HEATSHIELD, 74-95 ALL 12A & 13B

    HEATSHIELD, 74-95 ALL 12A & 13B

    Heatshield, 74-95 All 12A & 13B

    Click Here for a Weber 48IDA Suggested Parts List

    Browse our Weber Carbs, Manifolds and Parts section

    SKU: 16219
    $109.15
    Add to cart
  • HOLLEY 13B 4 PORT STOCK, EARLY NO PORT

    HOLLEY 13B 4 PORT STOCK, EARLY NO PORT

    Holley Stock port 13B 76-78 (465cfm carb) Discontinued

    We offer the popular Racing Beat-modified High Performance Holley Intake System Kit for the 1974-1985 13B 4 Port, stock port  (non-ported) engines. Our Racing Beat -modified Holley Intake Systems, manufactured for more than 30 years, have established themselves as an ideal way to increase the horsepower of the 13B rotary engine at a very economical price. With an open header installed in conjunction with the Holley Intake System on the engine, power gains of 40 HP are typical.

    Racing Beat’s High Performance Holley Intake System Kit has proven over the years to be an extremely reliable carburetor upgrade, with very “streetable” engine smoothness and drivability characteristics. Fuel economy is comparable to the stock carburetor under similar driving conditions.

    One of most significant benefits of this complete ready-to-go kit is that is takes all the guesswork, trial-and-error, and frustration out of attempting to assembly your own intake kit! We’ve taken over 40 years of our rotary engine experience and know-how and combined it for you in this complete, ready-to-install kit. Our intake kits has been thoroughly developed and tested using our in-house engine dyno to ensure maximum performance for each specific engine application.

    The heart of each intake system is a performance-proven Holley carburetor. Depending on the requirements of each specific application, the carburetor is disassembled by Racing Beat’s carburetor technicians then reworked, retuned, and reconfigured specifically for use with a designated rotary engine application. This process is not a simple “re-jetting” project, but a complex series of steps requiring machining, drilling and reconfiguring of the main and metering bodies, adjustment of the float bowls, and complete replacement of all jets.

    Complete Kit – Ready to Install
    Each comprehensive package includes a Racing Beat cast-aluminum high-rise intake manifold with a vacuum source for power brakes, a Racing Beat-modified Holley carburetor (465 CFM), Racing Beat Power Pulse Air Filter Canister with foam filter, throttle and metering oil pump linkages, and appropriate gaskets. All emissions control fittings are eliminated. This carburetor includes a vacuum-operated choke.

    Note: Installation of this kit requires use of a high performance fuel pump delivering 6 psi @ 20 gph.

    SKU: 18017
    $1,579.00
    Read more
  • HOLLEY MOP FITTING

    HOLLEY MOP FITTING

    Holley MOP Fitting
    5/16 24 Thread x 3/16 hose
    Goes into float level plug on a Holley.

    SKU: 91033
    $21.61
    Add to cart
  • MANIFOLD HOLLEY, 74-78 13B BRIDGEPORT

    MANIFOLD HOLLEY, 74-78 13B BRIDGEPORT

    Holley Manifold, 74-78 13B Bridgeport (4-port)

    SKU: 16479
    $430.53
    Add to cart

You May Also Like:

  • WEBER MANIFOLD for PERIPHERAL PORT 13B 48 or 51IDA RB PERIPHERAL PORT HOUSING

    WEBER MANIFOLD for PERIPHERAL PORT 13B 48 or 51IDA RACING BEAT PERIPHERAL PORT HOUSING

    Weber Manifold for Peripheral Port 13B 48 or 51IDA
    This manifold is designed to fit the Racing Beat Periperal Port 13B Rotor Housings.

    Works with IDA carbs from 48mm to 52mm bore.

    The Racing Beat-designed and manufactured Peripheral Port Intake Manifold mates a Weber 48 IDA or 51 IDA downdraft carburetor, or equivalent throttle body, to the Racing Beat-manufactured 13B peripheral port housings. (This manifold cannot be used on the Mazda Factory Race MFR housings.) The steel tubing manifold is attached to the rotor housings with hoses that are included. A simple support bracket fabricated for your particular application, typically attached from the carburetor-manifold junction to the threaded bosses on top of the rotor housings, will complete the task.

    Browse our Weber Carbs, Manifolds and Parts section

    SKU: 16490
    $363.83
    Add to cart
  • AIR FILTER HOUSING, RACING BEAT STOCK W/O FILTER

    AIR FILTER HOUSING, RACING BEAT STOCK WITHOUT FILTER

    Racing Beat Air Filter Housing, Stock without Filter

    Racing Beat’s dyno-proven Power Pulse Air Filter Assembly, for all 1971-85 Stock Carburetor Bodies, is designed specifically for performance. While the assembly uses the same Racing Beat foam air filter element that fits the stock canister, the design of the Power Pulse canister both improves air flow into the carburetor and limits the introduction of dirt particles into the filter element. The spun aluminum canister pieces are powder-coated white for added durability.

    There is no provision for emission control valve hose/air pump hose connections on this assembly; however, there is a position available to connect a crankcase breather tube if needed.

    SKU: 16531
    $109.15
    Add to cart