CLUTCH KIT STAGE 1, 93-95 HEAVY DUTY
Clutch Kit Stage 1, 93-95 Heavy Duty
(25% stronger than regular Stage 1)
| SKU: | 10802HD |
| Manufacturer SKU: | 10802HD |
CLUTCH KIT STAGE 1, 93-95 HEAVY DUTY
Exedy Stage 1
Street Strip performance, Organic Disc and Upgraded Pressure Plate
Includes Disc, Pressure Plate, T/O Bearing, Pilot Bearing and seal, and Alignment Tool
We open every Exedy Kit to make sure that the correct Pilot Bearing and seal are included, due to Exedy rarely includes the pilot seal and sometimes has the incorrect bearing.
$873.25
Related Products:
-
CLUTCH KIT STAGE 2, 93-95
Clutch Kit Stage 2, 93-95
Race PerformanceExedy Stage 2
Race performance, Metal Puck Disc and Upgraded Pressure Plate
Includes Disc, Pressure Plate, T/O Bearing, Pilot Bearing and seal, and Alignment ToolWe open every Exedy Kit to make sure that the correct Pilot Bearing and seal are included, due to Exedy rarely includes the pilot seal and sometimes has the incorrect bearing.
SKU: 10953 Manufacturer SKU: 10953 -
PILOT BEARING REMOVER TOOL
Pilot Bearing Remover Tool
To remove the old pilot bearing the bearing MUST be gripped at its front end. Very few of the aftermarket pullers we tested were able to do this correctly. They often tended to destroy the bearing making removal even harder.
To use the tool simply insert the attachment into the bearing, being sure to get it to the end of the bearing, insert the tapered / threaded end of the slap hammer part and screw them together until the bearing is firmly gripped. Then just “slap hammer” it out. Should take less than a minute.
This tool prevents eccentric shaft damage when removing bearing.
This tool does fit other cars including Miata. We do not have a list of cars that it will work on. The RX pilot bearing/input shaft measures .588″. If your application also has a .588 shaft/bearing, this tool will work.SKU: 49-1285 -
CLUTCH KIT STAGE 2, 93-95 THIN-RACE ONLY
Clutch Kit Stage 2, “Thin” Race Only, 93-95
Race performanceSKU: 10900 Manufacturer SKU: 10900 -
-
CLUTCH KIT STAGE 2, 93-95 STAGE 2 HEAVY DUTY
Clutch Kit Stage 2, 93-95 Heavy Duty
(25% stronger than regular Stage 2)
Exedy Stage 2
Race performance, Metal Puck Disc and Upgraded Pressure Plate
Includes Disc, Pressure Plate, T/O Bearing, Pilot Bearing and seal, and Alignment ToolWe open every Exedy Kit to make sure that the correct Pilot Bearing and seal are included, due to Exedy rarely includes the pilot seal and sometimes has the incorrect bearing.
SKU: 10953HD Manufacturer SKU: 10953HD
You May Also Like:
-
TRANSMISSION MOUNT REAR, ALL 74-85 EXCEPT 84-85 (AUTO)
Rear Transmission Mount, All 74-85 Except 84-85 Automatic Trans
SKU: 39-340A-1011 Manufacturer SKU: 1011-39-340A -
CLUTCH DISC SPORT/RACE, ALL-82 4 PUCK SPRUNG
Racing Beat Sport/Race Clutch Disc, All up to 82 4 Puck Sprung
SKU: 12528 -
FLYWHEEL RING GEAR, RX7 NON TURBO
Flywheel Ring Gear, RX7 Non Turbo
SKU: 11-7020-0866 Manufacturer SKU: 0866-11-702 -
CLUTCH FORK BOOT 86-92 TURBO
Clutch Fork Boot 86-92 Turbo
SKU: 16-2140-N302 Manufacturer SKU: N302-16-214 -
FLYWHEEL ALUMINUM, 74-82 (Does NOT include counterweight)
FLYWHEEL ALUMINUM, 74-82 W/O COUNTERWEIGHT
For 74-82 style CLUTCHES — The actual flywheel ONLY fits 74-92 non-turbos. The CLUTCH HARDWARE (included) is what differs.
The 74-82 clutch pressure plate uses no spacers while the 83-92 (non-turbo) pressure plates need the spacers.SKU: 11433 -
FLYWHEEL STOPPER TOOL, ALL Non-Turbo diameter flywheels
Flywheel Stopper Tool, All Non-Turbo diameter flywheels (Except RX-8’s)
Flywheel stopper makes getting the flywheel / counterweight nut off a LOT easier.
For flywheels 11 3/4″ diameter.SKU: 49-220NT Manufacturer SKU: 49-220NT