1990
Engine
-
GASKET SET, RX7 89-92 NON-TURBO —NLA—
This set has been discontinued by Mazda
Gasket Set, RX7 89-92 Non-Turbo
SKU: 10-2710-8DF5 Manufacturer SKU: 8DF5-10-271 -
GASKET SET, RX7 89-92 TURBO —NLA—
Gasket Set, RX7 89-92 Turbo
Mazda has discontinued this set
SKU: 10-2710-8DF6 Manufacturer SKU: 8DF6-10-271 -
HOSE AIR 89-92, TURBO DUCT TO BPAV
Turbo Duct To BPAV Air Hose 89-92
SKU: 13-772A-N370 Manufacturer SKU: N370-13-772A -
HOSE OIL METERING, 72-85 CARB PER FOOT
Oil Metering Hose, 72-85, Carb., PER FOOT
We have found this hose to work well for the oil metering lines for early cars that do not use fittings on the line ends. This hose can be used stand-alone, it will push directly onto the nipples at the carb and the metering pump, OR it can be used to splice an OEM metering hose by pushing over the OEM plastic hose.
At this time the 12A OEM short hose is only one available for carbs. We typically will use two short OEM lines and cut one and extend it about two inches in the middle with this hose to make a long line.
This hose also works well to splice/repair any OEM injector line for all 70-11 rotary.
Sold by the foot.SKU: MOPHOSE-1 -
HOSE OIL METERING, 84-11 F.I. PER FOOT
Oil Metering Hose, 84-11, Fuel Injection, PER FOOT
We have found this hose to work well for the 84 and later fuel injected cars. The OEM oil metering hoses have banjo fittings on each end. You need to carefully remove the OEM hose and clamp from each banjo fitting. This hose can then be routed and cut to whatever length you need. The ends can be held to the fittings with small zipties or safety wire.
Sold per foot.SKU: MOPHOSE-2 -
HOSE VACUUM OIL INJECTION LNE FC SPLITTER–NLA–
HOSE VACUUM OIL INJECTION LNE FC SPLITTER
Sorry, this item has been discontinued by Mazda.
SKU: 14-6170-N326 Manufacturer SKU: N326-14-617 -
HOUSING CENTER, 13B COSMO + 20B #3
HOUSING CENTER, 13B COSMO + 20B #3
Browse our 3 Rotor Engine Parts Catagory.
SKU: 10-D00C-NF01 Manufacturer SKU: NF01-10-D00C -
HOUSING CENTER, 89-92 NON-TURBO
Center Housing, 89-92 Non-Turbo
SKU: 10-D00C-N350 Manufacturer SKU: N350-10-D00C -
HOUSING CENTER, 89-92 TURBO
HOUSING CENTER, 89-92 TURBO
SKU: 10-D00C-N370 Manufacturer SKU: N370-10-D00C -
HOUSING FRONT, 13B COSMO—NLA—
HOUSING FRONT, 13B COSMO & 20B
Sorry, this item has been discontinued by Mazda
Browse our 3 Rotor Engine Parts Catagory.
SKU: 10-C00B-N390 Manufacturer SKU: N390-10-C00B -
HOUSING FRONT, 89-92 NON-TURBO —NLA—
HOUSING FRONT, 89-92 NON-TURBO
Sorry, this item has been discontinued by Mazda
SKU: 10-C00A-N350 Manufacturer SKU: N350-10-C00A -
HOUSING FRONT, 89-92 TURBO
Front Housing, 89-92 TURBO
SKU: 10-C00B-N370 Manufacturer SKU: N370-10-C00B -
HOUSING REAR, 13B COSMO + 20B (AUTOMATIC TRANSMISSION)
Housing Rear, 13B Cosmo + 20B (Automatic Transmission)
Browse our 3 Rotor Engine Parts Catagory.
SKU: 10-C50D-NF01 Manufacturer SKU: NF01-10-C50D -
HOUSING REAR, 89-92 NON-TURBO
Housing Rear, 89-92 Non-Turbo
SKU: 10-C50A-N350 Manufacturer SKU: N350-10-C50A -
-
HYLOMAR TUBE, 1.5 OZ
HYLOMAR TUBE, 1.5 OZ
Best chemical we have found for water seal O-rings. Brush it on with a trimmed down “acid” brush – in the water seal grooves and then on the seals after you have placed them into the grooves. Stays tacky for a LONG time.
One tube will do one engine easily.
SKU: HYLOMAR -
INTAKE GASKET, BETWEEN MANIFOLDS 20b—NLA—
3 Rotor Intake Gasket, Between Manifolds
Sorry, this item has been discontinued
Browse our 3 Rotor Engine Parts Catagory.
SKU: 13-112A-NF01 Manufacturer SKU: NF01-13-112A -
KNOCK SENSOR, 86-92 TURBO —NLA—
Sorry, this item has been discontinued by Mazda
Knock Sensor, 86-92 Turbo
SKU: 18-9210-N318 Manufacturer SKU: N318-18-921 -
-
MAGNETIC TRANS (79-11) AND DIFF DRAIN PLUG (86-11) – HPS
Magnetic Trans & Diff Plug
79-11 Transmission
86-11 Differential Oil DrainSKU: MDP-M18X150