1979
Clutch and Flywheel
Steel and Aluminum Flywheels Click here for Important Flywheel and Clutch Explanation
-
-
CLUTCH THROW OUT BEARING FOR 7.25″ RALLY TWIN DISC RACE CLUTCH
CLUTCH THROW OUT BEARING FOR 7.25″ RALLY TWIN DISC RACE CLUTCH
Use with 7.25″ Rally Double Disc Clutch
SKU: 236521B -
CLUTCH THROW OUT BEARING FOR 7.25″ TWIN DISC RACE CLUTCH
CLUTCH THROW OUT BEARING FOR 7.25″ TWIN DISC RACE CLUTCH
Use with 7.25″ Double Disc clutch
SKU: 236520 -
CLUTCH THROW OUT BEARING, 79-88 ALL NON-TURBO
Clutch Throw Out Bearing, 79-88 All Non Turbo
SKU: 16-5100-FE84 Manufacturer SKU: FE84-16-510 -
CLUTCH THROW OUT BEARING, FOR 4.5, 5.5 RACE CLUTCH
Clutch Throw Out Bearing for 4.5″, 5.5″ Race Clutches
SKU: 235520 -
FLYWHEEL ALUMINUM, 74-82 (Does NOT include counterweight)
FLYWHEEL ALUMINUM, 74-82 W/O COUNTERWEIGHT
For 74-82 style CLUTCHES — The actual flywheel ONLY fits 74-92 non-turbos. The CLUTCH HARDWARE (included) is what differs.
The 74-82 clutch pressure plate uses no spacers while the 83-92 (non-turbo) pressure plates need the spacers.SKU: 11433 -
FLYWHEEL DOWEL PIN, ALL
Flywheel Dowel Pin, All
Flywheel Dowel Pins have been needed a few times when someone has damaged them, or the machine shop surfacing the flywheel “lost” them.
SKU: 30-8220-9923 Manufacturer SKU: 9923-30-822 -
FLYWHEEL FRICTION PLATE FOR Racing Beat NON-TURBO ALUMINUM FLYWHEELS
Racing Beat Flywheel Friction Plate For Our Non-Turbo Aluminum Flywheels
SKU: 11431 -
-
FLYWHEEL HARDWARE, STEEL 74-92,TURBO, RACE
Steel Flywheel Hardware Kit, 74-92, Turbo, Race
Flywheel to Counterweight Bolt SetSKU: 95179 -
-
FLYWHEEL Mazdaspeed RACE 5.5″, FOR 5.5″ RACE CLUTCH NA–NLA–
Race Flywheel for 5.5″ Race Clutch. Fits all non-turbo diameter bell housings. (11.75 diameter and 116 tooth)
3.9 LBS
Accepts 5.5″ clutch ONLY
Our Hardware Kit #284063-HW-5.5 will NOT work on this flywheel. Customer must supply their own hardware for this flywheel.
When using this flywheel, you MUST modify your rear counterweight with additional holes and reduce hub diameter.Sorry, this item has been discontinued by Mazda
Click here for a templateSKU: 02-9207-0000 Manufacturer SKU: 0000-02-9207 -
FLYWHEEL RACE FOR 4.5″ CLUTCH Non-Turbo
Race Flywheel For 4.5″ Clutch Non-Turbo
Recommended Torque: 1/4″ bolt = 9-10 ft/lbs
SKU: 02-9207-45NA -
FLYWHEEL RACE FOR 5.5″ CLUTCH NON TURBO DIAMETER
Race Flywheel For 5.5″ Clutch Non Turbo Diameter
Recommended Torque for 5/16″ bolts = 20 lb/ft
SKU: 02-9207-55NA -
FLYWHEEL RACE FOR 7.25″ CLUTCH NON TURBO DIAMETER
Race Flywheel For 7.25″ Clutch Non Turbo Diameter
SKU: 02-9207-725NT -
-
FLYWHEEL RACE REPLACEMENT FRICTION PLATE 7.25″ N/A
Race Flywheel Replacement Friction Plate 7.25″ Non Turbo
This is a replacement friction plate for our 7.25″ race flywheel for the non-turbo diameter (11 3/4″).
New bolts and nuts for installation are included.
Note: The bellhousing and starter determine the diameter of flywheel needed, With all the race car transmission combinations out there Turbo versus non-turbo can sometimes be not the best definition – better to measure your flywheel diameter.
SKU: HS7450 -
FLYWHEEL REPLACEMENT FRICTION SURFACE FOR MAZDATRIX 225mm ALUMINUM FLYWHEEL
Flywheel Replacement Friction Plate for MAZDATRIX 225mm (9″) Non Turbo flywheel.
This is a replacement friction plate for our 225mm ALUMINUM flywheel for the non-turbo diameter (11 3/4″) flywheel.
New bolts and nuts for installation are included.
Note: The bellhousing and starter determine the diameter of flywheel needed, With all the race / street car transmission combinations out there Turbo versus non-turbo can sometimes be not the best definition – better to measure your flywheel diameter.
SKU: HS9057 Manufacturer SKU: HS9057 -
FLYWHEEL RING GEAR, RX7 NON TURBO
Flywheel Ring Gear, RX7 Non Turbo
SKU: 11-7020-0866 Manufacturer SKU: 0866-11-702
