1979
Transmission
-
-
DIFF PINION SEAL, 71-85 ALL
Differential Pinion Seal, 71-85 All
SKU: 27-0180-0223 Manufacturer SKU: 0223-27-018 -
DIFF SIDE CARRIER BEARING, 79-92 NON TURBO
Differential Side Carrier Bearing, 79-92 Non Turbo
SKU: 27-3500-0221 Manufacturer SKU: 0221-27-350 -
DIFF SLEEVE, PINION 73-85 + 86-92 Turbo
Differential Pinion Sleeve, 73-85 12a & 13b & 86-92 turbo RX7
SKU: 27-1710-0305 Manufacturer SKU: 0305-27-171 -
DRIVESHAFT BOLT, —NLA— 79-82
DRIVESHAFT BOLT, 79-82
Sorry, this item has been discontinued by Mazda.
SKU: 25-1230-1393 Manufacturer SKU: 1393-25-123 -
-
Driveshaft Flange for 79-82 RX7’s
Driveshaft Flange for 79-82 RX7’s
Rear Flange – the one that bolts to the differential flange for 79-82 manual or automatic transmissions.
(U-joint not included)SKU: 1502-29 -
DRIVESHAFT for 79-82 RX7
Aftermarket Driveshaft for 79-82 RX7
This is an aftermarket driveshaft made for us that fits all the 79-82 RX7’s — manual trans and automatics.
Uses the factory size of U-joint rear and the 2651-60 (Dodge 7260) front U-Joint. Complete, ready to bolt in.
SKU: 2691-700 -
DRIVESHAFT OEM, 79-82—NLA—
DRIVESHAFT OEM, 79-82
Sorry, this item has been discontinued by Mazda.
We have an aftermarket one that works fine.SKU: 25-1000-8871 Manufacturer SKU: 8871-25-100 -
Driveshaft Yoke for 79-82 RX7’s —NLA—
Driveshaft Yoke for 79-82 RX7’s Sorry, this item has been discontinued
SKU: 1503-22 -
DRIVESHAFT YOKE, Non-Turbo Manual Trans RX7
DRIVESHAFT YOKE, Non-Turbo Manual Trans RX7
Fits 83-92 Non-Turbo RX7 Transmissions. Fits our shafts 2691-701, 2691-704, 2691-704A
Uses a 7260 Dodge u-Joint which we sell as part number 2651-60
Does not work with the factory driveshaft
SKU: 2603-22 -
DRIVESHAFT, 83-85 RX7 WITH TURBO TRANS SWAP
Aftermarket Driveshaft, 83-85 CAR with Turbo Transmission Swapped in, still using the stock differential
This will also work in 79-82 cars, but you will have to source a 83-85 differential flange which is discontinued new, or use an 83-85 rear end. Typically, you would swap in an 84-85 rear in a performance application because the axles are bigger and stronger than the 79-83.
SKU: 2691-2535 -
DRIVESHAFT, ALUMINUM 83-85 RX7 WITH TURBO TRANS SWAP
Aftermarket Aluminum Driveshaft, 83-85 CAR with Turbo Transmission Swapped in, still using the stock differential
This will also work in 79-82 cars, but you will have to source a 83-85 differential flange which is discontinued new, or use an 83-85 rear end. Typically, you would swap in an 84-85 rear in a performance application because the axles are bigger and stronger than the 79-83.
SKU: 3191-2535A -
SEAL TRANSMISSION FRONT INPUT, 79-92 MANUAL ALL INCLUDING TURBO
Front Input Transmission Seal, 79-92 All Manual Transmission Including Turbo
SKU: 16-1030-0603 Manufacturer SKU: 0603-16-103 -
SEAL TRANSMISSION REAR, 71-85 ALL AUTOMATIC + MANUAL TRANS
Rear Transmission Seal, 71-85 All with Automatic and Manual Transmission
SKU: 17-335A-0437 Manufacturer SKU: 0437-17-335A -
SHIFTER NUT, ALL—NLA—
SHIFTER NUT, ALL
Sorry, this item has been discontinued by Mazda.
SKU: 17-524A-M503 Manufacturer SKU: M503-17-524A -
SPACER REAR AXLE BEARING, 79-83
Rear Axle Bearing Spacer, 79-83
SKU: 26-1550-0259 Manufacturer SKU: 0259-26-155 -
TRANSMISSION BUSHING, 79-92 NON TURBO TAILSHAFT
79–92 Non Turbo Tailshaft Transmission Bushing Manual (only)
SKU: 22-3330-0398 Manufacturer SKU: 0398-22-333 -
TRANSMISSION FRONT COVER, 79-80 —NLA—
TRANSMISSION FRONT COVER, 79-80
Sorry, this item has been discontinued by Mazda.
SKU: 16-220A-8540 Manufacturer SKU: 8540-16-220A -
TRANSMISSION MOUNT REAR 74-85 COMPETITION–NLA–
Sorry, this item has been discontinued by Mazda
Rear Transmission Mount, 74-85 All Manual Transimission, Competition
SKU: 39-3400-4352 Manufacturer SKU: 4352-39-340