THROTTLE BODY SPACER, 86-88 NON TURBO—NLA—
THROTTLE BODY SPACER, 86-88 NON TURBO
Sorry, this item has been discontinued by Mazda.
| SKU: | 13-645B-N326 |
| Manufacturer SKU: | N326-13-645B |
THROTTLE BODY SPACER, 86-88 NON TURBO
$0.00
Related Products:
-
WATER JACKET O-RING for Intake Manifold
Water Jacket O-Ring for Intake Manifold
We tested / looked at aftermarket O-rings but never found any that worked as well as these Mazda OEM ones.
We recommend using new ones anytime you are installing your intake manifold.
Needed on 1970 – 1992 non-6-port engines. This includes all the 86-92 Turbo rotor housings in case you are using those in another engine combo.
SKU: 13-1130-8527 Manufacturer SKU: 8527-13-113 -
GASKET MASS AIR FLOW METER TO AIR BOX 86-88 ALL
Mass Air Flow Meter To Air Box Gasket, 86-88 All
SKU: 13-211A-F285 Manufacturer SKU: F285-13-211A -
GASKET ACTUATOR, RX7 6-PORT 84-88
6-Port Actuator to Manifold Gasket 84-88
SKU: 13-171A-N225 Manufacturer SKU: N225-13-171A -
AIR CONTROL VALVE GASKET, 81-92 NON TURBO INNER
Air Control Valve Inner Gasket, 81-92 Non Turbo
SKU: 13-724A-N201 Manufacturer SKU: N201-13-724A -
INTAKE MANIFOLD CENTER GASKET, 86-88 NON-TURBO
Intake Manifold Center Gasket, 86-88 Non-Turbo
Between Upper and Lower Manifolds
SKU: 13-112A-N326 Manufacturer SKU: N326-13-112A -
UPPER INTAKE MANIFOLD GASKET, S4 NON TURBO
UPPER INTAKE MANIFOLD GASKET, S4 NON TURBO
Upper Manifold to Plenum
SKU: 13-135A-N326 Manufacturer SKU: N326-13-135A
You May Also Like:
-
WEBER IDA IDLE JET HOLDER 120
Weber IDA Idle Jet Holder 120
Browse our Weber Carbs, Manifolds and Parts section
SKU: 77903.120 -
VALVE AIR CONTROL, —NLA— 84-85 12A
VALVE AIR CONTROL, 84-85 12A
Sorry, this item has been discontinued by Mazda.
SKU: 13-720B-N251 Manufacturer SKU: N251-13-720B -
SOLENOID TURBO CONTROL, 93-95 ON RACK
Turbo Control Solenoid, 93-95 On Rack
SKU: 18-7410-N390 Manufacturer SKU: N390-18-741 -
VALVE AIR CONTROL, 81-82 FEDERAL/CANADA —NLA—
Sorry, this item has been discontinued by Mazda
Air Control Valve, 81-82 Federal/Canada
NOT California emissionsSKU: 13-7200-N203 Manufacturer SKU: N203-13-720 -
WEBER MANIFOLD for PERIPHERAL PORT 13B 48 or 51IDA RACING BEAT PERIPHERAL PORT HOUSING
Weber Manifold for Peripheral Port 13B 48 or 51IDA
This manifold is designed to fit the Racing Beat Periperal Port 13B Rotor Housings.Works with IDA carbs from 48mm to 52mm bore.
The Racing Beat-designed and manufactured Peripheral Port Intake Manifold mates a Weber 48 IDA or 51 IDA downdraft carburetor, or equivalent throttle body, to the Racing Beat-manufactured 13B peripheral port housings. (This manifold cannot be used on the Mazda Factory Race MFR housings.) The steel tubing manifold is attached to the rotor housings with hoses that are included. A simple support bracket fabricated for your particular application, typically attached from the carburetor-manifold junction to the threaded bosses on top of the rotor housings, will complete the task.
Browse our Weber Carbs, Manifolds and Parts section
SKU: 16490 -
AIR FILTER HOUSING, RACING BEAT HOLLEY WITHOUT FILTER
Racing Beat Air Filter Housing Without Filter for Racing Beat Holley Carburetor
Racing Beat’s dyno-proven Power Pulse Air Filter Assembly, for the Holley Carburetor, is designed specifically for performance. While the assembly uses the same Racing Beat foam air filter element that fits the stock canister, the design of the Power Pulse canister both improves air flow into the carburetor and limits the introduction of dirt particles into the filter element. The spun aluminum canister pieces are powder-coated white for added durability.
The Power Pulse Air Filter Assembly fits most Holley 465, 550, 600, and 650 CFM carburetors (specifically, all Racing Beat Holley Intake System Kits). There is no provision for emission control valve hose/air pump hose connections on this assembly; however, there is a position available to connect a crankcase breather tube if needed.
SKU: 16530