THROTTLE BODY SPACER, 86-88 TURBO THROTTLE BODY/PLENUM—NLA—
THROTTLE BODY SPACER, 86-88 TURBO THROTTLE BODY/PLENUM
Sorry, this item has been discontinued by Mazda.
| SKU: | 13-645B-N319 |
| Manufacturer SKU: | N319-13-645B |
THROTTLE BODY SPACER, 86-88 TURBO THROTTLE BODY/PLENUM
$0.00
Related Products:
-
-
WATER JACKET O-RING for Intake Manifold
Water Jacket O-Ring for Intake Manifold
We tested / looked at aftermarket O-rings but never found any that worked as well as these Mazda OEM ones.
We recommend using new ones anytime you are installing your intake manifold.
Needed on 1970 – 1992 non-6-port engines. This includes all the 86-92 Turbo rotor housings in case you are using those in another engine combo.
SKU: 13-1130-8527 Manufacturer SKU: 8527-13-113 -
GASKET SET 86-88 TURBO, O-RINGS ONLY
Gasket Set 86-88 Turbo, O-Rings Only
SKU: 10-S60A-N318 Manufacturer SKU: N318-10-S60A -
INTAKE MANIFOLD CENTER GASKET, 86-88 TURBO
Intake Manifold Center Gasket, 86-88 Turbo
Between Upper and Lower Manifolds
SKU: 13-112A-N318 Manufacturer SKU: N318-13-112A -
O-RING THROTTLE BODY TO INLET PIPE 86-92
Throttle Body to Inlet Pipe O-Ring 86-92
SKU: 13-W690-N326 Manufacturer SKU: N326-13-W69 -
GASKET MASS AIR FLOW METER TO AIR BOX 86-88 ALL
Mass Air Flow Meter To Air Box Gasket, 86-88 All
SKU: 13-211A-F285 Manufacturer SKU: F285-13-211A
You May Also Like:
-
VALVE AIR CONTROL, CHECK VALVE- ALL
Check Valve for All Air Control Valves
SKU: 13-7300-1480 Manufacturer SKU: 1480-13-730 -
SOLENOID TURBO CONTROL, 93-95 ON RACK
Turbo Control Solenoid, 93-95 On Rack
SKU: 18-7410-N390 Manufacturer SKU: N390-18-741 -
AIR FILTER HOUSING, RACING BEAT STOCK WITHOUT FILTER
Racing Beat Air Filter Housing, Stock without Filter
Racing Beat’s dyno-proven Power Pulse Air Filter Assembly, for all 1971-85 Stock Carburetor Bodies, is designed specifically for performance. While the assembly uses the same Racing Beat foam air filter element that fits the stock canister, the design of the Power Pulse canister both improves air flow into the carburetor and limits the introduction of dirt particles into the filter element. The spun aluminum canister pieces are powder-coated white for added durability.
There is no provision for emission control valve hose/air pump hose connections on this assembly; however, there is a position available to connect a crankcase breather tube if needed.
SKU: 16531 -
VALVE BPAV, 86-88 TURBO —NLA—
VALVE BPAV, 86-88 TURBO
Sorry, this item has been discontinued by Mazda.
SKU: 20-6600-N332 Manufacturer SKU: N332-20-660 -
WEBER MANIFOLD for PERIPHERAL PORT 13B 48 or 51IDA RACING BEAT PERIPHERAL PORT HOUSING
Weber Manifold for Peripheral Port 13B 48 or 51IDA
This manifold is designed to fit the Racing Beat Periperal Port 13B Rotor Housings.Works with IDA carbs from 48mm to 52mm bore.
The Racing Beat-designed and manufactured Peripheral Port Intake Manifold mates a Weber 48 IDA or 51 IDA downdraft carburetor, or equivalent throttle body, to the Racing Beat-manufactured 13B peripheral port housings. (This manifold cannot be used on the Mazda Factory Race MFR housings.) The steel tubing manifold is attached to the rotor housings with hoses that are included. A simple support bracket fabricated for your particular application, typically attached from the carburetor-manifold junction to the threaded bosses on top of the rotor housings, will complete the task.
Browse our Weber Carbs, Manifolds and Parts section
SKU: 16490 -
SOLENOID 3-WAY VACUUM 93-95
3-Way Vacuum Solenoid 93-95
SKU: 13-240A-1480 Manufacturer SKU: 1480-13-240A