INJECTOR AIR BLEED PRIMARY, 93-95
Primary Injector Air Bleed, 93-95
| SKU: | 13-C610-N3A2 |
| Manufacturer SKU: | N3A2-13-C61 |
INJECTOR AIR BLEED PRIMARY, 93-95
Note: Air bleeds are the little plastic diffusers that go in the hole under the injector. 84-88 non turbos use a one piece bleed, while 86-88 turbo and all 89-92 use a two piece bleed (Top & Bottom). These pieces almost always break when removed from the engine. Air bleeds are supplied with their O-rings installed.
$42.11
Related Products:
-
INJECTOR AIR BLEED SECONDARY, 93-95
Secondary Air Bleed Injector, 93-95
Note: Air bleeds are the little plastic diffusers that go in the hole under the injector. 84-88 non turbos use a one piece bleed, while 86-88 turbo and all 89-92 use a two piece bleed (Top & Bottom). These pieces almost always break when removed from the engine. Air bleeds are supplied with their O-rings installed.
SKU: 13-C600-N3A1 Manufacturer SKU: N3A1-13-C60 -
INJECTOR O-RING, 93-95 LOWER
Injector Lower O-Ring, 93-95
SKU: 13-ZG30-NF01 Manufacturer SKU: NF01-13-ZG3 -
-
INJECTOR O-RING, 93-95 UPPER
Upper Injector O-Ring, 93-95
SKU: 13-ZG40-NF01 Manufacturer SKU: NF01-13-ZG4 -
INJECTOR AIR BLEED O-RING, 84-95 ALL
Air Bleed Injector O-Ring, 84-95 All
SKU: 10-1252-9954 Manufacturer SKU: 9954-10-1252 -
INJECTOR LOWER GROMMET, 93-95 PRIMARY
Primary Lower Injector Grommet, 93-95
SKU: 13-2570-N3A1 Manufacturer SKU: N3A1-13-257
You May Also Like:
-
AIR FILTER HOUSING, RACING BEAT HOLLEY WITHOUT FILTER
Racing Beat Air Filter Housing Without Filter for Racing Beat Holley Carburetor
Racing Beat’s dyno-proven Power Pulse Air Filter Assembly, for the Holley Carburetor, is designed specifically for performance. While the assembly uses the same Racing Beat foam air filter element that fits the stock canister, the design of the Power Pulse canister both improves air flow into the carburetor and limits the introduction of dirt particles into the filter element. The spun aluminum canister pieces are powder-coated white for added durability.
The Power Pulse Air Filter Assembly fits most Holley 465, 550, 600, and 650 CFM carburetors (specifically, all Racing Beat Holley Intake System Kits). There is no provision for emission control valve hose/air pump hose connections on this assembly; however, there is a position available to connect a crankcase breather tube if needed.
SKU: 16530 -
BPAV GASKET, 86-88 ALL
Bypass Air Control Valve Gasket 86-88 All
SKU: 20-661A-N326 Manufacturer SKU: N326-20-661A -
AIR FILTER HOUSING, RACING BEAT STOCK WITHOUT FILTER
Racing Beat Air Filter Housing, Stock without Filter
Racing Beat’s dyno-proven Power Pulse Air Filter Assembly, for all 1971-85 Stock Carburetor Bodies, is designed specifically for performance. While the assembly uses the same Racing Beat foam air filter element that fits the stock canister, the design of the Power Pulse canister both improves air flow into the carburetor and limits the introduction of dirt particles into the filter element. The spun aluminum canister pieces are powder-coated white for added durability.
There is no provision for emission control valve hose/air pump hose connections on this assembly; however, there is a position available to connect a crankcase breather tube if needed.
SKU: 16531 -
VALVE VACUUM 1-WAY, GREEN/WHITE CHECK VALVE
1-Way Vacuum Check Valve, Green/White All RX7
SKU: 13-9950-HE41 Manufacturer SKU: HE41-13-995 -
AIR FILTER FOAM, 79-85 CARBURETED
Foam Air Filter for Carbs 79-85
The Racing Beat-designed Foam Air Filter Element for all 1971-85 Rotaries (except 1984-85 GSL-SE) consists of a polyurethane foam over a metal screen form that interchanges exactly with the stock element. The foam element can be re-used by periodically cleaning in solvent and re-oiling. While the element offers no significant increase in air flow when compared to a clean, stock paper element, as the paper element collects dirt its air flow capacity decreases dramatically while the foam element is nearly unaffected.
SKU: 16510 -
VALVE AIR CONTROL, CHECK VALVE- ALL
Check Valve for All Air Control Valves
SKU: 13-7300-1480 Manufacturer SKU: 1480-13-730