AIR FILTER K&N, 86-95
K&N Air Filter, 86-95
| SKU: | 33-2017 |
AIR FILTER K&N, 86-95
$75.60
Related Products:
-
AIR FILTER K&N FIPK, 86-88 KIT—NLA—
AIR FILTER K&N FIPK, 86-88 KIT
Sorry, this item has been discontinued by the Manufacturer.
The K&N 57-5005 FIPK air intake system replaces the restrictive factory air filter and air box in some Mazda RX-7 models. K&N intakes are designed to dramatically reduce intake restriction and improve air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine’s RPM range. The 57-5005 air intake comes with a chrome topped K&N high-flow air filter that installs onto the factory mass air sensor within the previous air box space. Air is directed through the air filter into the engine’s throttle body for a guaranteed power gain. The oversized, oval cone-shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes requiring commonly available tools to do the job. K&N 57 Series FIPK’s are street legal in all 50 US states and come with K&N’s Million Mile Limited Warranty.
SKU: 57-5005 -
-
FUEL FILTER, FUEL INJECTED RX7 86-92
Fuel Filter, Fuel Injected RX7 86-92 (All)
SKU: 13-4800-N327-9U Manufacturer SKU: N327-13-480-9U -
You May Also Like:
-
AIR FILTER HOUSING, RACING BEAT HOLLEY WITHOUT FILTER
Racing Beat Air Filter Housing Without Filter for Racing Beat Holley Carburetor
Racing Beat’s dyno-proven Power Pulse Air Filter Assembly, for the Holley Carburetor, is designed specifically for performance. While the assembly uses the same Racing Beat foam air filter element that fits the stock canister, the design of the Power Pulse canister both improves air flow into the carburetor and limits the introduction of dirt particles into the filter element. The spun aluminum canister pieces are powder-coated white for added durability.
The Power Pulse Air Filter Assembly fits most Holley 465, 550, 600, and 650 CFM carburetors (specifically, all Racing Beat Holley Intake System Kits). There is no provision for emission control valve hose/air pump hose connections on this assembly; however, there is a position available to connect a crankcase breather tube if needed.
SKU: 16530 -
VALVE AIR CONTROL, 86-88 NON TURBO MANUAL TRANS
Air Control Valve, 86-88 Non Turbo Manual Transmission
SKU: 13-9900-N326 Manufacturer SKU: N326-13-990 -
WEBER IDA IDLE JET HOLDER 120
Weber IDA Idle Jet Holder 120
Browse our Weber Carbs, Manifolds and Parts section
SKU: 77903.120 -
WEBER MANIFOLD for PERIPHERAL PORT 13B 48 or 51IDA RACING BEAT PERIPHERAL PORT HOUSING
Weber Manifold for Peripheral Port 13B 48 or 51IDA
This manifold is designed to fit the Racing Beat Periperal Port 13B Rotor Housings.Works with IDA carbs from 48mm to 52mm bore.
The Racing Beat-designed and manufactured Peripheral Port Intake Manifold mates a Weber 48 IDA or 51 IDA downdraft carburetor, or equivalent throttle body, to the Racing Beat-manufactured 13B peripheral port housings. (This manifold cannot be used on the Mazda Factory Race MFR housings.) The steel tubing manifold is attached to the rotor housings with hoses that are included. A simple support bracket fabricated for your particular application, typically attached from the carburetor-manifold junction to the threaded bosses on top of the rotor housings, will complete the task.
Browse our Weber Carbs, Manifolds and Parts section
SKU: 16490 -
VALVE BPAV, 86-88 NON-TURBO
By Pass Air Valve, 86-88 Non-Turbo
SKU: 20-6600-N326 Manufacturer SKU: N326-20-660 -
VALVE VACUUM 1-WAY, GREEN/BLACK
1-Way Vacuum Valve, Green/Black All RX7
Arrow on body points to green endSKU: 13-995A-N390 Manufacturer SKU: N390-13-995A