DRIVESHAFT OEM, 84-85 AUTOMATIC TRANS—NLA—
DRIVESHAFT OEM, 84-85 AUTOMATIC TRANSMISSION
Sorry, this item has been discontinued by Mazda.
| SKU: | 25-1000-M041 |
| Manufacturer SKU: | M041-25-100 |
DRIVESHAFT OEM, 84-85 AUTOMATIC TRANSMISSION
All Mazda OEM driveshafts from ’83 on have non-replaceable u-joints, When a u-joint wears out you need to replace the driveshaft. We suggest you check out our aftermarket shafts for your year all of which do have replaceable u-joints.
$0.00
Related Products:
-
WASHER ALL CLUTCH, & DRIVE SHAFT, 79-85
Washer, Fits All Rotary Clutches & 79-85 Drive Shaft
(Uses 6 for Clutch, 4 for driveshaft)SKU: 10-8000-9997 Manufacturer SKU: 9997-10-800 -
-
-
U-JOINT NON OEM, FITS ALL WITH PART# 2691-
U-JOINT NON OEM, FITS ALL WITH PART# 2691-
For our aftermarket Steel drivshafts. Fits all our driveshafts that start with 2691.
Please Note: These will NOT work in ANY factory Mazda Driveshaft!!SKU: 2651-60 -
DRIVESHAFT, 84-85 with AUTOMATIC TRANSMISSION
Aftermarket Driveshaft, 84-85 with Automatic Transmission
SKU: 2691-702
You May Also Like:
-
DIFF STUB SHAFT, N/A, S4 ALL, S5 OPEN—NLA—
Differential Stub Shaft
Fits all 86-88 non-turbo – both open and limited slips.
Also fits 89-92 non-turbo OPEN diffs (non-LSD).
Sorry, this item has been discontinued by Mazda
SKU: 27-270C-M055 Manufacturer SKU: M055-27-270C -
DIFF KAAZ 2-WAY, 84-92 NON TURBO
KAAZ Limited Slip Differential 2-Way, 84-92 Non Turbo
SKU: DBZ1810-2 -
DIFF CARRIER SHIM, 6.50MM 93-ON + RX8
Differential Carrier Shim, 93-ON + RX8, 6.50mm
Click here to see all available sizes of Differential Carrier ShimsClick Here to see all available sizes of Differential Pinion Spacers
SKU: 27-3750-R001 Manufacturer SKU: R001-27-375 -
DIFF PINION SEAL, 86-92 TURBO
Differential Pinion Seal, 86-92 Turbo
SKU: 27-1650-P090 Manufacturer SKU: P090-27-165 -
DIFF TORSEN LSD, 84-92 NON-TURBO
Torque Sensing Limited Slip Differential, 84-92 Non Turbo
These very unique torque sensing differential limited slip units are now available for 84 and later RX-7’s. They really are the absolute best design for rear traction under ALL different conditions. It is able to transmit far more torque to the wheel that still has traction than any other type of differential. It uses the friction of the worm gear teeth and the thrust washers for the differential limiting force. In comparison with viscous type, or friction type LSD, it has the following benefits:
1) Large bias ratio torque proportioning
2) Less change of bias ratio over time of car use
3) No special differential oil or LSD additives needed
4) Improved overall traction and improved controllability under acceleration.
5) Virtually no change of torque sensing or traction control through differential temperature range.
*Note- if you have an 86-92 Non-Turbo rear end we KNOW that 86-88 N/A stub axles will work. We also KNOW that 89-92 LSD stub axles will NOT work. If you have 89-92 Non-LSD stub axles, we do NOT know that they will work with this diff. Some measuring will be necessary.SKU: MZTX-TORSEN1 -
DRIVESHAFT, 86-92 N/A WITH TURBO TRANSMISSION
Aftermarket Driveshaft, 86-92 Non-Turbo CAR with Turbo Transmission Swapped in, still using the non-turbo differential
SKU: 2691-799