CLUTCH THROW OUT BEARING, 79-88 ALL NON-TURBO
Clutch Throw Out Bearing, 79-88 All Non Turbo
| SKU: | 16-5100-FE84 |
| Manufacturer SKU: | FE84-16-510 |
CLUTCH THROW OUT BEARING, 79-88 ALL NON-TURBO
$40.94
Related Products:
-
CLUTCH KIT, 79-82
Clutch Kit, 79-82
Stock/Original EquipmentOEM Street Clutch Kit
Includes Disc, Pressure Plate, T/O Bearing, Pilot Bearing and seal, and Alignment ToolWe open every Exedy Kit to make sure that the correct Pilot Bearing and seal are included, due to Exedy rarely includes the pilot seal and sometimes has the incorrect bearing.
SKU: 07020 Manufacturer SKU: 07020 -
CLUTCH PILOT SEAL, ALL ROTARY 74-ON
Clutch Pilot Seal, All Rotary 74-On
SKU: 11-404A-1881 Manufacturer SKU: 1881-11-404A -
PILOT BEARING TOOLS, INSTALLER & REMOVER
Mazda Rotary Engine Pilot Bearing Tools Remover and Installer Kit
SKU: KIT-PILOT-TOOLS -
CLUTCH PILOT BEARING, ALL ROTARY 74-11
Clutch Pilot Bearing, All Rotary 74-11
SKU: 11-D030-N326 Manufacturer SKU: N326-11-D03 -
CLUTCH DISC ALIGNMENT TOOL, ALL NON-TURBO 72-92
Clutch Disc Alignment Tool, All Non-turbo 72-92
Clutch alignment tools are needed whenever a clutch is installed. Damage to the clutch disc is almost assured if alignment is not correct.
SKU: 0033-05 -
CLUTCH KIT, 83-88 NON-TURBO
Clutch Kit, 83-88 Non-Turbo
Stock/Original EquipmentOEM Street Clutch Kit
Includes Disc, Pressure Plate, T/O Bearing, Pilot Bearing and seal, and Alignment ToolWe open every Exedy Kit to make sure that the correct Pilot Bearing and seal are included, due to Exedy rarely includes the pilot seal and sometimes has the incorrect bearing.
SKU: 10025 Manufacturer SKU: 10025
You May Also Like:
-
SEAL TRANSMISSION FRONT INPUT, 79-92 MANUAL ALL INCLUDING TURBO
Front Input Transmission Seal, 79-92 All Manual Transmission Including Turbo
SKU: 16-1030-0603 Manufacturer SKU: 0603-16-103 -
REAR COUNTERWEIGHT 83-85 12A
Rear counterweight for 83-85 12A Engines — they have the “N” on the rotors
These were discontinued by Mazda — We are having them made.
We took a few pair of 83-85 12A rotors, weighed them all for an average, set the bobweights for those weights on a 12A eccentric shaft then we re-balance NEW 13B rear counterweights to match.
SKU: 11-751A-N226-MOD Manufacturer SKU: N226-11-751A-MOD -
-
FLYWHEEL STOPPER TOOL, ALL Non-Turbo diameter flywheels
Flywheel Stopper Tool, All Non-Turbo diameter flywheels (Except RX-8’s)
Flywheel stopper makes getting the flywheel / counterweight nut off a LOT easier.
For flywheels 11 3/4″ diameter.SKU: 49-220NT Manufacturer SKU: 49-220NT -
FLYWHEEL ALUMINUM, 74-82 (Does NOT include counterweight)
FLYWHEEL ALUMINUM, 74-82 W/O COUNTERWEIGHT
For 74-82 style CLUTCHES — The actual flywheel ONLY fits 74-92 non-turbos. The CLUTCH HARDWARE (included) is what differs.
The 74-82 clutch pressure plate uses no spacers while the 83-92 (non-turbo) pressure plates need the spacers.SKU: 11433 -
CLUTCH MASTER, 78- 2/79 RX7
Clutch Master, 78- 2/79 RX7
Hose comes out slightly to the driver sideSKU: 41-400A-8871 Manufacturer SKU: 8871-41-400A