Springs
-
OEM SUSPENSION SPRING 86-92, RIGHT FRONT COUPE SPORT SUSPENSION—NLA—
OEM SUSPENSION SPRING 86-92, RIGHT FRONT COUPE SPORT SUSPENSION
Sorry, this item has been discontinued by Mazda.
SKU: 34-0110-FB44 Manufacturer SKU: FB44-34-011 -
OEM Suspension Springs for 86-92’s –NLA–
OEM Suspension Springs for 86-92’s
This item has been discontinued by Mazda.
SKU: 34-0210-FB44 Manufacturer SKU: FB44-34-021 -
SUSP SPRING SET FRONT & REAR RX8 MEGAN RACING
Megan Racing Front & Rear Spring Set, RX8
Approx. Lowering 1.75″ Front, 1.5″ RearMegan Racing Performance Lowering Springs are constructed of SAE 9254 Cold Wounded Steel, one of the strongest materials available. The high tensile strength and phosphate powder coating delivers outstanding spring rates that are extremely durable and resist premature sagging?.
The result is a spring that specifically offers race-car handling, yet maintains smooth and comfortable ride characteristics. Carefully matched springs rates provide exceptional handling, response, control and balance. These springs offer a generous drop to your car while remaining very streetable by having enough clearance to avoid bottoming-out; and the lowered center of gravity improves performance and increases stability, as well as enhancing the appearance of the vehicle.
Features:
- Phosphate Powder Coated Orange
- Constructed of SAE 9254 Cold Wounded Steel
- Front Lowering Rate: 1.75″
- Rear Lowering Rate 1.5″
- High Tensile Strength
- Lowers the Center of Gravity Improving Performance and Increases Stability
Fitment:
- Mazda Rx8 2004-2011
SKU: MR-LS-MRX8 -
SUSPENSION KIT BILSTEIN, RX8 PRO-KIT
B-12 Bilstein (Pro-Kit) Suspension Kit, RX8
Bilstein B12 (Pro-Kit) suspension kits are a complete set of B8 Performance Plus dampers paired with Eibach (Pro-Kit) springs that provide moderate lowering between 24-40mm (depending on application). These kits offer dampers and springs that are tuned for each specific application to provide the best fixed height lowering solution. Bilstein B12 (Pro-Kit) suspension kits provide the perfect combination of suspension dynamics, quality and aesthetics.
-Front Lowered Height: 25-30mm, up to 860kg Axle Load
-Rear Lowered Height: 25mm, up to 1030kg Axle Load
SKU: 46-190338 -
SUSPENSION SPRING 86-92, OEM RIGHT FRONT COUPE NORMAL SUSPENSION
OEM Right Front Spring 86-92, Coupe Normal Suspension
SKU: 34-011B-FB01 Manufacturer SKU: FB01-34-011B -
SUSPENSION SPRING FRONT & REAR SET, 04-08 RX8 MAZDASPEED —NLA—
Sorry, this item has been discontinued by Mazda
Mazdaspeed Front and Rear Spring Set, 04-08 RX8 Lowers 3/4″
SKU: 34-01Z0-QSEA Manufacturer SKU: QSEA-34-01Z -
SUSPENSION SPRING FRONT & REAR SET, 86-92 RX7 CONVERTIBLE RACING BEAT
Racing Beat Front and Rear Spring Set, 86-92 RX7 Vert
Lowers approx. 1/2″Racing Beat has designed suspension coil springs that are suitable for a street or track use. This complete set of front and rear suspension springs were designed specifically for the 1986-91 RX-7 Convertible by Racing Beat’s engineering staff. Ideally suited for use with either the OEM shocks, or your favorite aftermarket units, these springs interchange exactly with the stock springs on the RX-7.
These springs have been designed with a rate increase of approximately 20% (front – 139 lb/in) and 20% (rear – 134 lb/in) with a modest drop of 1/2-inch (front and rear).
If your car is still running on the original shocks, it is certainly time to consider a replacement! We do not suggest installing aftermarket performance-based springs on a set of tired high mileage shocks, as this may produce a “springy” and bouncy ride. If you prefer to keep the ride quality of your car more “stock like”, you may wish to replace your old shocks with a set of Mazda units, or an equivalent set of aftermarket OEM style replacements. However, if you wish to noticeably improve the handling performance of your car, combine a set of new springs with a set of aftermarket Tokico, KYB, or Koni performance shocks. Although the ride quality will become noticeably firmer, the handling improvements will be a much-welcomed improvement.
SKU: 14082 -
SUSPENSION SPRING FRONT & REAR SET, 86-92 RX7 COUPE RACING BEAT
Racing Beat Front & Rear Spring Set, 86-92 RX7 Coupe
Lowers approx 1″Racing Beat has designed suspension coil springs that are suitable for a street or track use. This complete set of front and rear suspension springs were designed specifically for the 1986-91 RX-7 (except convertible) by Racing Beat’s engineering staff. Ideally suited for use with either the OEM shocks, or your favorite aftermarket units, these springs interchange exactly with the stock springs on the RX-7.
These springs have been designed with a rate increase of approximately 20% (front – 156 lb/in) and 20% (rear – 128 lb/in) with a modest drop of 1-inch (front and rear).
If your car is still running on the original shocks, it is certainly time to consider a replacement! We do not suggest installing aftermarket performance-based springs on a set of tired high mileage shocks, as this may produce a “springy” and bouncy ride. If you prefer to keep the ride quality of your car more “stock like”, you may wish to replace your old shocks with a set of Mazda units, or an equivalent set of aftermarket OEM style replacements. However, if you wish to noticeably improve the handling performance of your car, combine a set of new springs with a set of aftermarket Tokico, KYB, or Koni performance shocks. Although the ride quality will become noticeably firmer, the handling improvements will be a much-welcomed improvement.
SKU: 14081 -
SUSPENSION SPRING FRONT & REAR SET, 04-08 RX8 RACING BEAT
Racing Beat Front & Rear Spring Set, 04-08 RX8
.5″ Drop, Front and RearSKU: 14084 -
SUSPENSION SPRING FRONT & REAR SET, 79-85 RX7 RACING BEAT
Racing Beat Front & Rear Spring Set, 79-85 RX7
Lowers approx. 1″SKU: 14080 -
SUSPENSION SPRING FRONT & REAR SET, 93-95 RX7 RACING BEAT
Racing Beat Front & Rear Spring Set, 93-95 RX7
Lowers Car approx. .67″ front, 1.35″ rearSKU: 14083 -
SUSPENSION SPRING FRONT 04-11, STOCK RX8 SPORT SUSPENSION EACH
OEM Front Spring 04-11, RX8 With Sport Suspension (Each)
SKU: 34-0110-FE02 Manufacturer SKU: FE02-34-011 -
SUSPENSION SPRING FRONT 79-80, —NLA—
SUSPENSION SPRING FRONT 79-80
Sorry, this item has been discontinued by Mazda.
SKU: 34-011B-8871 Manufacturer SKU: 8871-34-011B -
SUSPENSION SPRING FRONT 81-85, OEM RIGHT —NLA—
Mazda has discontinued this part
OEM Front Right Spring 81-85.
SKU: 34-0110-FA66 Manufacturer SKU: FA66-34-011 -
SUSPENSION SPRING FRONT 86-92, OEM LEFT FRONT COUPE NORMAL SUSPENSION—NLA—
SUSPENSION SPRING FRONT 86-92, OEM LEFT FRONT COUPE NORMAL SUSPENSION
Sorry, this item has been discontinued by Mazda.
SKU: 34-021B-FB01 Manufacturer SKU: FB01-34-021B -
SUSPENSION SPRING FRONT 93, OEM (EACH)
OEM Front Spring 93 only (Each)
SKU: 34-0110-FD03 Manufacturer SKU: FD03-34-011 -
SUSPENSION SPRING FRONT 94-95, OEM NORMAL SUSPENSION—NLA—
Mazda has discontinued this item
OEM Front Spring 94-95, Normal Suspension (Each)
SKU: 34-0110-FD17 Manufacturer SKU: FD17-34-011 -
SUSPENSION SPRING FRONT 94-95, OEM SPORT SUSPENSION—NLA—
SUSPENSION SPRING FRONT 94-95, OEM SPORT SUSPENSION
Sorry, this item has been discontinued by Mazda.
SKU: 34-0110-FD01 Manufacturer SKU: FD01-34-011 -
SUSPENSION SPRING FRONT LEFT 81-85, OEM—NLA—
Sorry, this item has been discontinued by Mazda.
OEM Front Left Spring 81-85.
SKU: 34-0110-FA67 Manufacturer SKU: FA67-34-011 -
SUSPENSION SPRING FRONT ONLY PAIR 93-95 RB
Racing Beat Front Suspension Spring 93-95 (pair)
Racing Beat only sells these in a complete front and rear set. We have one pair of fronts on the shelf.
Only 1 Left!SKU: WP10372 Manufacturer SKU: 14024