INJECTOR AIR BLEED SECONDARY, 89-92 ALL
Secondary Air Bleed Injector, 89-92 All
| SKU: | 13-C600-N351 |
| Manufacturer SKU: | N351-13-C60 |
INJECTOR AIR BLEED SECONDARY, 89-92 ALL
Note: Air bleeds are the little plastic diffusers that go in the hole under the injector. 84-88 non turbos use a one piece bleed, while 86-88 turbo and all 89-92 use a two piece bleed (Top & Bottom). These pieces almost always break when removed from the engine. Air bleeds are supplied with their O-rings installed.
$41.73
Related Products:
-
INJECTOR UPPER GROMMET, 84-92 & RX8
Upper Injector Grommet, 84-92 & RX8
SKU: 13-2520-8574 Manufacturer SKU: 8574-13-252 -
INJECTOR O-RING, 84-92, RX8 ALL
Injector O-Ring, 84-92, RX8 All
SKU: 13-2530-8574 Manufacturer SKU: 8574-13-253 -
INJECTOR AIR BLEED PRIMARY, 89-92 ALL BOTTOM
Primary Injector Air Bleed, 89-92 All Bottom
SKU: 13-C61A-N350 Manufacturer SKU: N350-13-C61A -
INJECTOR LOWER GROMMET, 89-92
Injector Lower Grommet, 89-92
SKU: 13-2570-N350 Manufacturer SKU: N350-13-257 -
INJECTOR AIR BLEED PRIMARY, 86-88 TURBO, 89-92 TOP
Primary Injector Air Bleed, 86-88 Turbo, 89-92 Top
SKU: 13-260A-N236 Manufacturer SKU: N236-13-260A -
INJECTOR AIR BLEED O-RING, 84-95 ALL
Air Bleed Injector O-Ring, 84-95 All
SKU: 10-1252-9954 Manufacturer SKU: 9954-10-1252
You May Also Like:
-
WEBER MANIFOLD for PERIPHERAL PORT 13B 48 or 51IDA RACING BEAT PERIPHERAL PORT HOUSING
Weber Manifold for Peripheral Port 13B 48 or 51IDA
This manifold is designed to fit the Racing Beat Periperal Port 13B Rotor Housings.Works with IDA carbs from 48mm to 52mm bore.
The Racing Beat-designed and manufactured Peripheral Port Intake Manifold mates a Weber 48 IDA or 51 IDA downdraft carburetor, or equivalent throttle body, to the Racing Beat-manufactured 13B peripheral port housings. (This manifold cannot be used on the Mazda Factory Race MFR housings.) The steel tubing manifold is attached to the rotor housings with hoses that are included. A simple support bracket fabricated for your particular application, typically attached from the carburetor-manifold junction to the threaded bosses on top of the rotor housings, will complete the task.
Browse our Weber Carbs, Manifolds and Parts section
SKU: 16490 -
VALVE BPAV, 86-88 NON-TURBO
By Pass Air Valve, 86-88 Non-Turbo
SKU: 20-6600-N326 Manufacturer SKU: N326-20-660 -
VALVE AIR CONTROL, 86-88 NON TURBO MANUAL TRANS
Air Control Valve, 86-88 Non Turbo Manual Transmission
SKU: 13-9900-N326 Manufacturer SKU: N326-13-990 -
AIR FILTER FOAM, 79-85 CARBURETED
Foam Air Filter for Carbs 79-85
The Racing Beat-designed Foam Air Filter Element for all 1971-85 Rotaries (except 1984-85 GSL-SE) consists of a polyurethane foam over a metal screen form that interchanges exactly with the stock element. The foam element can be re-used by periodically cleaning in solvent and re-oiling. While the element offers no significant increase in air flow when compared to a clean, stock paper element, as the paper element collects dirt its air flow capacity decreases dramatically while the foam element is nearly unaffected.
SKU: 16510 -
VALVE AIR CONTROL, 83 FEDERAL/CANADA –NLA–
VALVE AIR CONTROL, 83 FEDERAL/CANADA
Sorry, this item has been discontinued by Mazda.
1983 Only Without California emissionsSKU: 13-7200-N231 Manufacturer SKU: N231-13-720 -
SOLENOID TURBO CONTROL, 93-95 ON RACK
Turbo Control Solenoid, 93-95 On Rack
SKU: 18-7410-N390 Manufacturer SKU: N390-18-741