INJECTOR LOWER GROMMET, RX8 PRIMARY
Lower Primary Injector Grommet, RX8
| SKU: | 13-2570-N3H2 |
| Manufacturer SKU: | N3H2-13-257 |
INJECTOR LOWER GROMMET, RX8 PRIMARY
Injector Grommets are the thick seal at the base of the injector and the dust seal at the top.
$8.80
Related Products:
-
INJECTOR UPPER GROMMET, 84-92 & RX8
Upper Injector Grommet, 84-92 & RX8
SKU: 13-2520-8574 Manufacturer SKU: 8574-13-252 -
INJECTOR O-RING, 84-92, RX8 ALL
Injector O-Ring, 84-92, RX8 All
SKU: 13-2530-8574 Manufacturer SKU: 8574-13-253 -
INJECTOR NEW, RX8 PRIMARY
New OEM Primary Injector, RX8
SKU: 13-250A-N3H1 Manufacturer SKU: N3H1-13-250A -
INJECTOR NEW RX8, MANUAL TRANS PRIMARY #2 & SECONDARY
New OEM Injector RX8, Manual Transmission Primary #2 & Secondary
SKU: 13-250A-N3H3 Manufacturer SKU: N3H3-13-250A -
INJECTOR NEW, RX8 AUTOMATIC TRANS SECONDARY
New OEM Secondary Injector, RX8 Automatic Transmission
SKU: 13-2500-N3H2 Manufacturer SKU: N3H2-13-250 -
INJECTOR LOWER GROMMET, RX8 SECONDARY
Lower Secondary Injector Grommet, RX8
SKU: 13-2570-N3H1 Manufacturer SKU: N3H1-13-257
You May Also Like:
-
VALVE BPAV, 86-88 TURBO —NLA—
VALVE BPAV, 86-88 TURBO
Sorry, this item has been discontinued by Mazda.
SKU: 20-6600-N332 Manufacturer SKU: N332-20-660 -
AIR FILTER HOUSING, RACING BEAT HOLLEY WITHOUT FILTER
Racing Beat Air Filter Housing Without Filter for Racing Beat Holley Carburetor
Racing Beat’s dyno-proven Power Pulse Air Filter Assembly, for the Holley Carburetor, is designed specifically for performance. While the assembly uses the same Racing Beat foam air filter element that fits the stock canister, the design of the Power Pulse canister both improves air flow into the carburetor and limits the introduction of dirt particles into the filter element. The spun aluminum canister pieces are powder-coated white for added durability.
The Power Pulse Air Filter Assembly fits most Holley 465, 550, 600, and 650 CFM carburetors (specifically, all Racing Beat Holley Intake System Kits). There is no provision for emission control valve hose/air pump hose connections on this assembly; however, there is a position available to connect a crankcase breather tube if needed.
SKU: 16530 -
SOLENOID 3-WAY VACUUM 93-95
3-Way Vacuum Solenoid 93-95
SKU: 13-240A-1480 Manufacturer SKU: 1480-13-240A -
AIR FILTER FOAM, 79-85 CARBURETED
Foam Air Filter for Carbs 79-85
The Racing Beat-designed Foam Air Filter Element for all 1971-85 Rotaries (except 1984-85 GSL-SE) consists of a polyurethane foam over a metal screen form that interchanges exactly with the stock element. The foam element can be re-used by periodically cleaning in solvent and re-oiling. While the element offers no significant increase in air flow when compared to a clean, stock paper element, as the paper element collects dirt its air flow capacity decreases dramatically while the foam element is nearly unaffected.
SKU: 16510 -
WEBER MANIFOLD for PERIPHERAL PORT 13B 48 or 51IDA RACING BEAT PERIPHERAL PORT HOUSING
Weber Manifold for Peripheral Port 13B 48 or 51IDA
This manifold is designed to fit the Racing Beat Periperal Port 13B Rotor Housings.Works with IDA carbs from 48mm to 52mm bore.
The Racing Beat-designed and manufactured Peripheral Port Intake Manifold mates a Weber 48 IDA or 51 IDA downdraft carburetor, or equivalent throttle body, to the Racing Beat-manufactured 13B peripheral port housings. (This manifold cannot be used on the Mazda Factory Race MFR housings.) The steel tubing manifold is attached to the rotor housings with hoses that are included. A simple support bracket fabricated for your particular application, typically attached from the carburetor-manifold junction to the threaded bosses on top of the rotor housings, will complete the task.
Browse our Weber Carbs, Manifolds and Parts section
SKU: 16490 -
VALVE AIR CONTROL, 83 FEDERAL/CANADA –NLA–
VALVE AIR CONTROL, 83 FEDERAL/CANADA
Sorry, this item has been discontinued by Mazda.
1983 Only Without California emissionsSKU: 13-7200-N231 Manufacturer SKU: N231-13-720